DC Motors

Brushless Stepper Motor suits high torque applications.
DC Motors

Brushless Stepper Motor suits high torque applications.

Featuring 2-phase, tin-can style design, Model PF55 is available with both unipolar and bipolar windings. With unipolar winding, unit offers holding torque of 120 N, while bipolar winding provides 150 N of holding torque. In full-step excitation mode, motor has 48 steps/rev, rated voltage of 5 and 12 V, inductance from 12-37 mH, and 5-36 W resistance. Gearhead version, available with 20 ratio...

Read More »
DC Motors

Permanent Magnet Motors incorporate radial flux design.

Housed in IP54+ rated enclosures with MAX GUARD® insulation system for use in strenuous environments, SyMAX(TM) Ultra-Efficient(TM) Series includes SyMAX(TM) FHP with NEMA 48 frame and SyMAX(TM) IHP with 182-215T frame. Radial flux design enables elimination of sheaves and belts, gearboxes, and chains in certain applications. SyMAX-i(TM) FHP model features IntelliDrive(TM) embedded...

Read More »
DC Motors

Siemens Drive Technologies Division Supplies Integrated Drive Train for the First Series Hybrid Electric Aircraft in the World

Siemens AG, Diamond Aircraft and EADS are set to present the world's first aircraft with a serial hybrid electric drive system at the Paris Air Show Le Bourget 2011. The aircraft was built by the three partners to test the hybrid electric drive concept. In the future, the technology will cut fuel consumption and emissions by 25 percent, compared to today's most efficient aircraft drives. The...

Read More »
Brushless DC Servo Gearmotor comes in sterilizable version.
DC Motors

Brushless DC Servo Gearmotor comes in sterilizable version.

Featuring 60° winding pattern and NdFeB high performance magnet, EC16 is available with hall sensors or as sensorless solution. There are up to 5 winding types available and 4 motor options: 30 or 60 W, sterilizable or non-sterilizable. Designed for stability and quiet running, motor is coupled with gearheads that are also sterilizable and can be used in medical and hand tool applications.

Read More »
DC Motors

Brushless DC Gear Motor delivers 150 W power.

Providing output torque up to 120 Nm, 3-stage Model 80199701 handles high side loads with 1,000 N radial and 200 N axial. Standard motor package features IP20 protection rating that can be upgraded to IP54. Measuring 81 mm dia x 229 mm long, motor incorporates shaft extension on rear, allowing for encoder or brake. Unit can operate with voltages from 6-75 Vdc, uses hall sensors and 8-wire...

Read More »
Brushless 40 mm Motor features high-density design.
DC Motors

Brushless 40 mm Motor features high-density design.

Constructed with neodymium permanent magnet, stainless steel housing, and welded flanges, EC 40 offers flat speed/torque gradient of ~3.6 rpm/mNm, mechanical time constant of 2.1 msec, permissible speed of 18,000 rpm, and efficiency rating of 89%. Ironless winding promotes quiet running and elevated stall torque, and design works with variety of components. Applications include industrial use,...

Read More »
Transtecno Releases Compact, Powerful Right Angle Worm Gearmotor Line
DC Motors

Transtecno Releases Compact, Powerful Right Angle Worm Gearmotor Line

PMDC gearmotors cover a large range of output speeds and torques Alton, Iowa - Transtecno Group based in Bologna, Italy has released a new line of permanent magnet right angle worm gearmotors for numerous applications. The Transtecno line of PMDC right angle worm gearmotors has 5 motor sizes available in 12v & 24v, coupled to a possible 12 different gearbox ratios, along with 5 different gearbox...

Read More »
DC Motors

High-Power PM Motors are suited for commercial automation.

Utilizing ferrite magnets to maximize power density, 400 Series of 63 mm permanent magnet brushed motors house magnet circuits in 12-slot armature design. Magnet edges are designed to minimize cogging torque as well as vibration and noise, while 2 ball bearings cut down friction loss. Included power cables allow for radial and axial exit from units. Motors also have end covers that support...

Read More »
New Brushless DC Motors and Drives
DC Motors

New Brushless DC Motors and Drives

PCC has just developed and released a completely new drive/gearmotor package for its auger based, continuous loss-in-weight feeders and blenders. The X-Series blenders and AFG/PF feeders previously incorporated a PWM drive and a permanent magnet DC gearmotor to rotate the metering auger. PCC started the development by designing a new generation of motor drives that would control both the older...

Read More »
Generator tolerates high shock and vibration.
DC Motors

Generator tolerates high shock and vibration.

Measuring 1.8 in. diameter and 2.1 in. axial length, Model DIH18-21-BBNA provides continuous output of 40 Vdc at speeds of 11,000 rpm. Unit incorporates bearing suspension that absorbs vibration and shock, as well as one-piece housing that eliminates vulnerable attachment points. Motor is used as generator to supply power to remote brake health monitoring system and can withstand high shock and...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers