New DCL Series, a Low Voltage, Brushless Motor Control Operates in The 12-48 VDC Power Bandwidth, up to 30 Amps Peak (1 Minute) or 15 Amps Continuously
Removes many of the trim pots and jumpers associated with typical motor controls, reducing costs on hardware and setup. Include 1.37 form factor, 1% base speed regulation and 60:1 speed range. Base DCL units are Modbus capable and come with one trim pot for calibrating maximum speed and two DIP switches for closed / open loop operation.
Read More »
New PML Series DC Motor Drives Come with On-Board Trim Pots
The PML Series DC Motor Drives are available in steel and plastic NEMA 4X packages and can control motors ranging from 90 to 280 VDC, up to 5 A/1.5 HP. The trim-pots allow user to set maximum and minimum speeds, acceleration and deceleration rates, motoring and regening current limits and integral feedback gains. They come with isolated inputs that accept floating or grounded signals (0 ± 5 VDC,...
Read More »
BLE2 Series Brushless Motor and Driver is IP66 rated.
BLE2 Series Brushless Motor and Driver is available round shaft and combination-type parallel shaft or right-angle hollow shaft geared models. Unit is offered with high gear ratio gearheads and offers maximum speed of 4000 r/min. Product provides speed ratio of 1:50 and features 30 W, 60 W, 120 W, 200 W and 400 W output power.
Read More »6-phase Bidirectional PWM Controller housed in TQFP package.
Designed for buck and boost power conversions between 12V and 48V automotive buses, 6-phase Bidirectional PWM Controller delivers up to 3.75kW. Unit maximizes system efficiency by adding or dropping phases as per load requirements. Unit manages abrupt change in power conversion direction by regulating voltage and current. Features master/slave design supporting up to 4 ICs in parallel, current...
Read More »
Everything You Need to Know About E-Textiles
This ebook provides an in-depth overview into everything you need to know about E-Textiles.
Read More »
Brushless DC Motor Controls provide commutated power.
Available in chassis mount and NEMA 4X enclosures, Brushless DC Motor Controls provide commutated power and variable speed control, delivering optimal speed regulation over wide range of loads. Closed loop units offer line and low voltage options as well as analog and digital options. Controls are suited for applications where high torque, high speed, and quiet operation are needed.
Read More »
Servo Motor Controllers work with brushless, brushed DC motors.
Used to control Pittman brushless and brushed DC motors, BGE Series 4-quadrant positioning motion controllers have integral output stage and offer various modes of operation. Controllers can be operated stand-alone with digital or analog I/O or as- slave in CANopen network with device profile DSP 402, protocol DS 301. With 12–60 Vdc rated input and 4–20 A continuous output current, series...
Read More »Oerlikon's Drive Systems Segment Underline Investment in China Bus Market
High-tech solutions for low floor city buses at Bustec 2015 in Shanghai Shanghai (China) –- Oerlikon’s Drive Systems Segment, with its brand Oerlikon Graziano, will participate to Bustec 2015, the China International Bus Technology Exhibition, in Shanghai from May 27-29, at SNIEC, Hall E1 – Booth 2081. The participation to BUSTEC is an important joint activity with the Chinese partner CVC...
Read More »
Programmable 3-Phase Brushless Motor Drive produces smooth motion.
Refining motion by incorporating trapezoidal and s-curve profiles, PBL4850E IDEA drive™ utilizes sinusoidal commutation to produce smooth motion with minimum torque ripple. GUI offers automatic motion profile parameter population, facilitated application prototyping, and on-screen button-based motor programming. Accepting 12–48 Vdc input, this 4-quadrant brushless controller offers...
Read More »
Motor Control Pre-Driver IC enables quiet low-power fan operation.
Accommodating 3.5–30 V input, TC78B006 series comprises single-phase brushless DC (BLDC) motor control pre-driver ICs available in 5.5 x 6.4 mm SSOP16 or 3 x 3 mm QFN16 package. PWM voltage and pseudo sine-wave current driving functions promote efficient and quiet cooling fan operation in data servers and home appliances, while automatic standby function reduces power consumption when fan is...
Read More »
Brushless DC Motor Controller leverages 0.18 um CMOS technology.
Suited for automotive and industrial applications, embedded brushless DC motor controllers use X-FAB XH018, 0.18 -µm modular mixed signal high-voltage CMOS technology. These single-chip, high-voltage controllers with flexible peripherals and direct motor driving capabilities integrate diverse digital and analog components. Computation capacity supports complex motor control algorithms, such as...
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
