Cutting Tool Inserts

PCBN Grades/Inserts optimize hard turning processes.
Cutting Tool Inserts

PCBN Grades/Inserts optimize hard turning processes.

PVD-coated solid PCBN inserts maximize metal removal at high speeds while maintaining tolerance and surface finish. Solid PCBN inserts in PVD-coated 100P and 300P or uncoated CBN100 and CBN300 come in positive/negative styles. Multi-tipped CBN10 inserts come in positive/negative styles in 2- or 3-cornered versions. Size 13 mm multi-direction turning models in CBN10 or CBN20 perform internal and...

Read More »
Wiper Inserts suit high-feed finishing applications.
Cutting Tool Inserts

Wiper Inserts suit high-feed finishing applications.

Negative C- and D-style pin-type, double-sided inserts are offered in chipbreaker M3 for general finishing purposes; or MF2 for high-accuracy applications. Both come in grades TP1000 or TP2000. Positive W- and T-style inserts are offered in chipbreaker F1 for high-feed finishing with low cutting forces. T-style comes in grade TP100 or TP2000 and W-style comes in TP2000 only. Geometry WZ is...

Read More »
Inserts drill and thread in one machining pass.
Cutting Tool Inserts

Inserts drill and thread in one machining pass.

Type T and H ZBGF Series Thrillers permit cutting hard materials up to 60 Rc. They are solid micro-grain carbide substrate with axial, through-the-tool coolant capability. ZBGF-T Thrillers deep-hole machine aluminum and cast iron materials in thread depths of up to 3xD. ZBGF-H Thrillers machine hardened steels, stainless, inconel, and titanium from 36-60 Rc in thread depths up to 2xD.

Read More »
Insert suits plunge and turn operations.
Cutting Tool Inserts

Insert suits plunge and turn operations.

MTC-PT deep-grooving tool incorporates double-V design for stability and positive-rake geometry for low cutting force, suitable for soft materials. Product cuts in axial and radial directions and delivers chip control over entire range of depth of cut when turning. Double-ended inserts are available in 3 grades: M40 (-36), M45 (-33) and M93 (-34).

Read More »
Cutting Tool Inserts

Insert has diamond-like carbon coating.

Grade DL1000, with blue-luster diamond-like carbon (DLC) coating, maintains corrosive resistance and low friction coefficient of .05-.2 and promotes good chip control. Aluminum-alloy adhesion on edge is suppressed to decrease cutting resistance. Generation of build-up edge is suppressed, maintaining sharpness of edge. Insert suits dry machining of aluminum alloys and non-ferrous applications.

Read More »
Cutting Tool Inserts

Solid CBN Insert suits hard turning applications.

SumiBoron® BNS800 grade insert offers multiple corners and high CBN content. Available with multiple geometries, insert provides high fracture toughness, heavy depth of cut capabilities, and high thermal conductivity. Applications include cylinder bores, brake and disc rotors, and hard turning. Materials suitable for machining are gray cast iron, colmonoy, hard facing alloys,...

Read More »
Machining Inserts handle high-temperature alloys and iron.
Cutting Tool Inserts

Machining Inserts handle high-temperature alloys and iron.

SpectraTurn(TM) and SpectraMill(TM) milling and turning inserts are PVD-coated with titanium-aluminum nitride or aluminum-titanium nitride. Other products include M750 Milling System for malleable and cast irons; SV209- and VC949-coated carbide grades for turning titanium, titanium-alloys and nickel- and cobalt-based alloys; and APET high-shear, PCVD-coated TPC25 carbide inserts for stainless and...

Read More »
Cutting Tool Inserts

Milling Products suit die and mold industries.

CoroMill Century facemill is available in 1.5 to 6.0 in. dia and is capable of 40,000 rpm. It uses carbide or polycrystalline diamond inserts and micro-adjustable mating pockets. CoroMill 390 long-edge facemill is available in 2 to 8 in. dia and uses 18 mm long inserts for deep cuts in high-temperature alloys. CoroTurn family consists of extra-sharp, high positive rake, V-style inserts for smooth...

Read More »

All Topics