Cutting Tool Inserts

Turning Tools cover holes down to 1 mm diameter.
Cutting Tool Inserts

Turning Tools cover holes down to 1 mm diameter.

CoroTurn XS tooling solutions for internal turning, grooving, and threading, are designed for small part machining. Program is comprised of 4 sizes: CXS-04, -05, -06 and -07. Each includes inserts of varying length that fit into boring bars with internal cutting fluid supply directed at cutting edge via 2 nozzles to ensure chip evacuation and sufficient cooling. Boring bars range from 10-25.4 mm...

Read More »
Coated Inserts are suited for use with high-temp alloys.
Cutting Tool Inserts

Coated Inserts are suited for use with high-temp alloys.

PVD-coated insert grades KC5510 and KC5525 enable cutting speeds of 300-400 surface feet per minute (sfm) on Inconel 718. Grade KC5510 is fine-grained tungsten carbide with substrate that has 6% cobalt for deformation resistance, while KC5525 has 10% cobalt fine-grain tungsten carbide substrate for added security in interrupted cuts. Available in square; 35°, 55°, and 80° diamond; and...

Read More »
Indexable Insert End Mills handle extreme chip loads.
Cutting Tool Inserts

Indexable Insert End Mills handle extreme chip loads.

Capable of aggressive material removal, Time-S inserts feature stable, precision-manufactured cutter bodies and inserts with blended double-radius cutting edge. Design provides optimum distribution of cutting forces along entire cutting edge, minimizing vibration and ensuring smooth free-cutting at chip loads of up to .100 in. per tooth. Steel removal rates exceed 150 in.Â-³/min using 80 mm...

Read More »
Cutting Tool Inserts

Coated PcBN Insert machines hardened steels.

Premium grade BNC150 combines heat-resistant, fine-grain PcBN with wear-resistant, TiCN ceramic coating to extend tool life and ensure consistent surface finishes. All corners are brazed individually to strengthen cutting edge. Available in negative, positive, and wiper styles, BNC150 is suited for continuous high-speed machining, as well as light interrupted cutting.

Read More »
Parting/Grooving System offers PCD and CBN grades.
Cutting Tool Inserts

Parting/Grooving System offers PCD and CBN grades.

ValGROOVE(TM) System is available in VSG single-edge and VTG twin-groove, double-edge insert styles. Single-edge style includes 5 geometries for general, light, precision, radius, and under-cut grooving. VSG inserts are available in 3 carbide grades with TiCN/Al203/TiN CVD coating, multi-layer PVD TiAlN coating, and uncoated. VTG double-edge inserts include geometries for general grooving and...

Read More »
Cutting Tool Inserts

Wiper Inserts promote long tool life.

Series ELUW Wiper Inserts, designed for high-end finishing, utilize 3-step projections for chip control. Best chip control is achieved in low-carbon alloy steel applications, including shafts and gears. Inserts feaure sharp cutting edge and wave edge, which contributes to stable chip control during copy turning.

Read More »
Insert Grade suits stainless steel turning.
Cutting Tool Inserts

Insert Grade suits stainless steel turning.

Type GC2025 all-in-one, multi-layer insert grade combines mix of hardness and toughness that provides resistance to crack growth. MT-CVD coating reduces flaking, built-up edges, and adhesions. Insert grade is capable of roughing as well as intermittent machining. It allows machining with lower speeds near center, in addition to higher peripheral speeds. GC2025 is available in up to 7 insert...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers