Cutting Tool Inserts

Round Inserts target medical industry.
Cutting Tool Inserts

Round Inserts target medical industry.

Round inserts can be used for internal turning of spherical cup in ball and socket hip joint and optimize roughing process when machining direct from castings. Round shape imparts strong cutting edge and resistance to excessive notch wear. Inserts are compatible with CoroTurn 107 boring bars and EasyFix(TM) method to achieve correct center height of cutting edge. Suited for machining of cobalt...

Read More »
Inserts are offered in 2-9 mm cutting widths.
Cutting Tool Inserts

Inserts are offered in 2-9 mm cutting widths.

ANN series of cut off/parting inserts are available in 3°, 8°, and 15° face angles and are interchangeable with the Iscar Self Grip GTN, GTR, and GTL styles. Designed for steels and SS, Model AN2120 features PVD coating on alloyed substrate, and is suited for low to medium cutting speeds in unfavorable conditions. Model AN3010 suits high speed machining on all cast irons.

Read More »
Cutting Tool Inserts

Inserts suit high-production milling applications.

Featuring 4 helical 0.315 in. long cutting edges, MINITANG T490 E90LN Inserts can be used for machining 90° shoulders at high feed rates with no mismatch. Helical cutting edge and positive rake angle enable soft, clean cut. Offered in diameters from 0.625-1.50 in., inserts are available with either coarse or fine pitch configuration and can also be used for side plunging applications.

Read More »
Cutting Tool Inserts

Parting and Grooving Insert features direct jet cooling.

DO-GRIP parting insert is available with JET-CUT system, which features coolant hole that passes through insert to outlet near cutting edge. This applies coolant where it needs to go while simultaneously cooling insert internally. Designed for operations on stainless steel and high-temperature alloys, DGNC inserts come in .118 and .157 in. widths in C- and J-type chipformers and work with...

Read More »
Cutting Tool Inserts

Chipbreaker Designs suit various turning applications.

Designed for ValTURN(TM) Turning System, turning inserts come in 4 chipbreaker geometries: positive/negative C5 for general-purpose turning, round RN5 for heavy-duty roughing and interrupted cuts, and wiper WN3/WN5 for high-speed finishing and high-feed operations. Used on steels, stainless steels, and abrasive cast iron materials, products meet application-specific requirements with variety of...

Read More »
Cutting Tool Inserts

Boring Bars and Inserts are designed for rigidity.

Suited for working with insertable boring bars in bores as small as .160 in., THINBIT® MINI-BORE® inserts are available in 2 grades of sub-micron grain carbide with TiN, TiCN, TiAlN, and Diamond coatings. MINI-BORE carbide triqon bars are designed for rigidity. They come in 3/16, Â-¼, and 3/8 in. dia for WCGT style .156, .187, and .250 in. IC inserts.

Read More »
Cutting Tool Inserts

Insert suits universal steel turning operations.

Designed to enhance roughing and finishing operations, Model GC4225 ISO class P25 grade insert is composed of Al2O3 coating for chemical wear resistance, MTCVD TiCN coating for mechanical wear resistance, and gradient substrate, including cobalt, for optimized hardness and toughness. It can be used with variety of materials and provides optimum performance under demanding conditions.

Read More »
Inserts help increase gray cast iron processing speed.
Cutting Tool Inserts

Inserts help increase gray cast iron processing speed.

A4 groove and turn inserts, made of KYON 3500, are suited for plunge grooving as well as high-speed groove and turn applications on gray cast iron. Silicon nitride ceramic grade insert features guide rail on top and 120° v-prism on bottom that seats product securely in toolholder. Offered in rectangular and full-radiused styles, A4 double-ended insert comes in cutting widths from .125-.250...

Read More »
Cutting Tool Inserts

Inserts suit heavy-duty turning applications.

ValTURN(TM) VP5535 steel machining grade combines cobalt-enriched surface layer backed by fine grain substrate core that resists plastic deformation. MTCVD coating of TiCN/AbCVTiN provides wear resistance, thermal protection, and polished edge to minimize cutting edge build-up. More than 150 configurations are available including variety of diamond shapes as well as square, triangle, and trigon...

Read More »
Cutting Tool Inserts

Turning Grade Insert machines stainless steel.

Suited for high-speed machining of stainless steel and most steels in roughing to semi-finishing applications, AN2025 Grade has cobalt-enriched substrate and multi-layered ceramic CVD coating. It offers resistance to flank wear and plastic deformation along with medium abrasion resistance. Type AN2025 is available in HF positive rake grade for high-speed finishing and PGR-style for fine finishing.

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers