Jet Edge Exhibiting Cutting-Edge Waterjet Technology at EASTEC Booth #1065, May 20-22
Hand Held Drills

Jet Edge Exhibiting Cutting-Edge Waterjet Technology at EASTEC Booth #1065, May 20-22

(ST. MICHAEL, Minn. - March 27, 2008) - Jet Edge, Inc. will demonstrate its latest waterjet cutting technologies at the EASTEC 2008 Advanced Productivity Exposition, May 20-22 at the Eastern States Exposition Grounds in West Springfield, Mass. During EASTEC, Jet Edge will showcase its versatile High Rail Gantry precision waterjet, its iP60-50 ultra-high pressure intensifier pump and its new...

Read More »
Waterjet Cutters and Cutting Machinery

Flow International Showcasing 87,000 psi Waterjet Cutting Technology at EASTEC 2008, Booth # 1515

KENT, Wash., March 7, 2008 - Flow International Corporation (NASDAQ: FLOW), the world's leading developer and manufacturer of ultrahigh-pressure (UHP) waterjet technology, will showcase 87,000 psi waterjet cutting at EASTEC 2008 booth number 1515, being held in W. Springfield, Mass., May 20-May 22, 2008. Flow's HyperPressure technology enables faster, more cost-effective cutting, lower part cost...

Read More »
OMAX® to Feature 55100 JetMachining® Center at Expo Manufactura
Machining Centers

OMAX® to Feature 55100 JetMachining® Center at Expo Manufactura

Large footprint waterjet system provides a variety of benefits to today's manufacturer Kent, Washington, March 4, 2008 - OMAX will demonstrate the many benefits of the 55100 JetMachining® Center at Expo Manufactura, the largest manufacturing and metalworking trade show in Mexico. The industry leader in abrasive waterjet machining will occupy booth #906 from March 4 - 6 at the Cintermex...

Read More »
Engineering Software

New Brands of Laser and Waterjet Machines Supported by ProNest Nesting System

Lockport, NY USA - February 10, 2008 - ProNest Nesting System from nesting software company, MTC Software, Inc. (www.mtc-software.com), now offers support for additional brands of laser and waterjet machines. Adding to the selection of laser and waterjet machine brands supported by ProNest, including Trumpf, Bystronic, Mitsubishi, Amada, Omax, Flow, and many more, MTC Software this month added...

Read More »
Die Cutting Service handles non-metallic parts.
Die Cutting Services

Die Cutting Service handles non-metallic parts.

Performed in clean-practice, positive-pressure facility, Digital Die-Less Cutting Service permits multiple on-the-fly part modifications for rapid prototyping. It offers non-metallic parts with intricate shapes, including narrow cross sections and close hole spacing, in sizes from less than 1 in. square to 60 x 120 in. with ±0.005 in. tolerances. End-user sends/specifies materials to be...

Read More »
Water Jet Cutting Services

OMAX® Abrasive Waterjets Offer Large Scale Precision and Increased Flexibility

Kent, Washington, February 1, 2008 - The newest additions to OMAX® Corporation's industry leading line of precision abrasive waterjet systems will be demonstrated at WESTEC 2008. The 60120 and 5555 JetMachining® Centers will be on display in booth #2532 from March 31 - April 3 at the Los Angeles Convention Center in Los Angeles, CA. OMAX's new 60120 JetMachining Center is a large...

Read More »
Laser Cutting Services

Fractional Handpieces facilitate skin resurfacing.

Offered as single-treatment device, Lux2940(TM) fractional ablative laser handpiece lets practitioner tailor level of skin tightening to patient needs. It offers 3 treatment modes and uses microfractional technology to preserve portions of healthy tissue surrounding treatment zone. Also available, Lux1440(TM) fractional non-ablative skin resurfacing handpiece is suited for skin resurfacing...

Read More »
Machining Centers

Mitsubishi Showcases Complementary Technologies at Westec Booth #3532

January 17, 2007 Wood Dale, IL - Mitsubishi announces its extensive lineup of complementary technologies to be showcased at Westec booth #3532. Mitsubishi will highlight the latest EDM, hole popper, waterjet, and high-speed vertical machining equipment. The new FA10 Advance wire EDM features a new M700 Series Mitsubishi control. The Windows-based system with 15-inch LCD touch screen display...

Read More »
Water Jet Cutting Services

Flow International Corporation Receives Multi-Million Dollar Aerospace Contract with Mitsubishi Heavy Industries

Mitsubishi purchases second round of Flow waterjets to cut wing structures for major commercial aircraft composite airframe manufacturer KENT, Wash., November 27, 2007 - Flow International Corporation (Nasdaq: FLOW), the world's leading developer and manufacturer of industrial waterjet machines used for cutting and cleaning applications around the world, today announced that Mitsubishi Heavy...

Read More »
Machining Center cuts large parts from stock up to 5 x 10 ft.
Water Jet Cutting Services

Machining Center cuts large parts from stock up to 5 x 10 ft.

Model 60120 JetMachining® Center abrasive waterjet cuts ceramics, composites, glass and stone, aluminum, tool steel, stainless steel, and titanium with accuracy of motion up to .003 in. It calculates velocity of tool path at over 2,000 points per inch, allowing for complete control over motion of abrasive jet. Unit features Compute First - Move Later motion control technology, abrasive feed...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics