Cut-Off Machinery

Tube Cutting Machine handles multi-purpose applications.
Cut-Off Machinery

Tube Cutting Machine handles multi-purpose applications.

Model 618 Automatic Cutter offers cylindrical, standard square, and thin square cuts in widths from 0.010-18 in, suiting tube cutting applications for seals, rings, and gaskets. Featuring digital touch screen controls and digital operating components, it also has mandrel with adjustable length from 18-1 in. and stock from 6 in. OD to minimum extrudable size that will fit mandrel and...

Read More »
Cut-Off Machinery

Boiler Tube Panel Saw Supported by Track to Minimize Fatigue

A panel saw and steel track system that attaches easily to water wall boiler tubes using weld tabs which help determine the cut line and fully support to tool are available from ESCO Tool of Holliston, Massachusetts. The PanelHog® APS-438LP Low-Profile Saw and EscoTrack(TM) System are especially designed for removing boiler tube panel sections in tight areas and require no special operator...

Read More »
Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw
Cut-Off Machinery

Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw

Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw Eliminates Abrasive Particle Dispersion Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw features an enclosed wet cutting area with dual coolant nozzles to effectively eliminate the dispersion of abrasive particles into the workplace. The saw has a 14-inch abrasive wheel, a 5 HP, 3 phase , 1725 RPM TEFC motor, dual moveable...

Read More »
Electric Diamond Cutters feature 2.6 kW motor.
Cut-Off Machinery

Electric Diamond Cutters feature 2.6 kW motor.

Designed for reinforced concrete, granite curbstone, slabs, bricks, metal beams, and steel pipes, Models DCH 230 and DCH 300 Electric Diamond Cutters have cutting depth adjustment mechanism to reach depths of 3.4 and 4.7 in. Hilti Smart Power electronic control system constantly regulates motor power to suit material being cut and pressure applied to tool. Employing ergonomic in-line design with...

Read More »
Cut-Off Machinery

Angle Grinder is suited for metal and concrete cutting.

Measuring 4Â-½ in., Model W8-115 Quick Angle Grinder features cool flow technology with repositioned brushes for unrestricted airflow. It has 8.0 A motor with 800 W of power, 19.5 in./lb of torque, and no-load speed of 10,000 rpm. Weighing 6.2 lb, tool includes double lipped labyrinth sealed bearings, winding protection grid, epoxy coated windings, racket and dual grip zones for ergonomic...

Read More »
Carbide Cutoff Systems can replace 3-4 production saws.
Cut-Off Machinery

Carbide Cutoff Systems can replace 3-4 production saws.

Designed for fully automatic cycles, Nishijimax CNC Carbide Cutoff Systems feature auto loaders and bar stockers. With NC Saw Spindle Feed Axis, precise feed rate is set automatically and input chip load is maintained. Powder metal saw blade brake enables zero vibration when blade enters cut, while gearbox oil chiller maintains constant gearbox temperature. Offering blade capacities from...

Read More »
Cut-Off Machine automates cutting of carbide rods.
Cut-Off Machinery

Cut-Off Machine automates cutting of carbide rods.

Intended for carbide tool and carbide rod manufacturing industries, Auto-Cut CNC Carbide Rod Cut-Off Machine automatically loads and cuts .055 to 1 9/16 in. diameter rods, up to 16 in. long, from large capacity magazine. It comes with CNC controls with touch screen operator interface, which enables users to set rod diameter and length parameters, as well as flood coolant system.

Read More »
Georgia Superabrasive's Hard Turning Tool Holders Offer Faster Cuts and Increased Machine Productivity
Cut-Off Machinery

Georgia Superabrasive's Hard Turning Tool Holders Offer Faster Cuts and Increased Machine Productivity

Snellville, Georgia, June 25, 2007 - Georgia Superabrasive offers a variety of hard turning tool holders as a better alternative to cylindrical grinding of hardened parts. CBN cuts faster, cooler and produces a better finish on hard surfaces 45Rc to 65Rc+. Benefits of Hard Turning vs. Cylindrical Grinding are tremendous. Hard turning produces a reduced set up time, reduced number of operations,...

Read More »
Cut-Off Machinery

Cut-Off Tool comes with 36 V battery.

Suited for maintenance and repair operations, Model DC415KL can cut door hardware and locks, old anchors, tile, electrical cable, and rusted fasteners. It can also be used to finish ornamental and handrail welds, and prepare for several applications such as rail cable repair, remote cutting and welding, and mounting tabs. Features include Quick-Change wheel release system, protected spindle lock...

Read More »
Cut-Off Machinery

Cut-Off Machine features rotating head.

Available in 4 different models, Rotating Head Cut-Off Machine keeps tube and bar stock stationary while cutting tool rotates around material being cut. This prevents marking of OD and provides ability to cut non-straight or as-welded materials. Both ends of bar or tube can be chamfered and no additional facing operations are necessary. Providing capacities from .750-10 in. OD, machine can handle...

Read More »

All Topics