Custom Manufacturing Services

Polyurethane Sealant adds glossy, protective finish to metal.
Sealants

Polyurethane Sealant adds glossy, protective finish to metal.

CLEARLOK® is water-based polyurethane sealant that adds protective topcoat on most metal surfaces, including iron, steel, and aluminum. Non-polluting with no harmful VOC content, polymer sealant produces coating 0.0001–.00003 in. thick. It is rated for corrosion resistance of 12–24 hr of neutral salt spray or over 100 hr of humidity exposure. Available in 5 or 55 gal drums, product can...

Read More »
Computers

EPIC SBC maximizes spatial efficiency in embedded systems.

Measuring just 20.84 mm thick, Model EPC-CV1 is based onÂ- Intel® Atom™ N2600/N2800 CPU with onboard NM10 chipset. Board features AMD HD7410M chipset for video support, including 512 MB of dedicated video memory. HDMI is supported along with VGA and 24-bit Dual Channel LVDS. In addition to 8-bit digital I/O interface and 2 Mini PCI Express slots, EPC-CV1 features SIM card interface...

Read More »
Rubber

Ticona Fiber Reinforced Material Innovations on Display at ITB Automotive Mass Reduction Strategies 2013

Ticona, the engineering polymers business of Celanese Corporation, is showcasing fiber reinforced material innovations to reduce weight and save costs during the ITB Group Automotive Mass Reduction Strategies 2012 conference on Thursday, May 2, at the Sheraton Detroit Novi Hotel in Michigan. Ticona will highlight: • Celstran® continuous fiber reinforced thermoplastics (CFR-TP) tapes, rods...

Read More »
Presses

Precision Medical Products Inc. (PMP) Invests in Another Sodick Injection Molding Press, Model GA50

This adds additional capacity for its precision injection molding operations in its Denver facility.Â-  PMP is once again aligning with Sodick Plustech's signature V-Line" technology that separates the plasticizing and injection stages for better shot consistency and control.  Specialized Precision Molding (SPM), Shrewsbury PA, which was acquired by PMP in 2002, was the first molding...

Read More »
Milling Machines

Washington Mills: Milling to Fine and Sub-Micron Powders

Washington Mills, one of the world's largest producers of abrasives and fused mineral products, offers custom milling services for companies looking to grind small batches of materials to fine and sub-micron particle sizes. Washington Mills' pilot crushing and grading plant has the unique ability to mill small batches of material in both coarse and fine sizes. The finer sizes can be milled either...

Read More »
Miller Plastics Now Offers Large 5 Axis Plastic CNC Milling
Machining

Miller Plastics Now Offers Large 5 Axis Plastic CNC Milling

With the demand increasing for larger machined plastic parts along with more complex intricate parts Miller Plastics has added a new HAAS VR-8 for LARGE capacity plastic milling with 5 axis movement. The new HAAS VR-8 has a working envelope ofÂ-  64 long X 40" wide X 36" vertical movement.  The very large working area along with its 4th and 5th axis of movement gives Miller Plastics...

Read More »
Abrisa Technologies Offers Screen Printing on 80" Diagonal Glass for Display Applications
Glass

Abrisa Technologies Offers Screen Printing on 80" Diagonal Glass for Display Applications

Abrisa Technologies, a leading supplier of high performance flat glass for the display industry can now screen print on 80 inch diagonal soda lime or low iron float glass for a wide variety of applications including digital signage, ruggedized outdoor displays, and monitors. With the increase in demand for custom large format digital signage, having a qualified U.S. supplier for thin,...

Read More »
Turning Grades have CVD coating, diverse cutting speed ranges.
Turning Machinery

Turning Grades have CVD coating, diverse cutting speed ranges.

While wear- and deformation-resistantÂ- NL200 is intended for machining cast iron, wear-resistant NL250 is suited for semi-finishing and finishing applications. Medium and rough machining of steels and cast iron materials with light scale but no interruption can be accomplished with NL300, and NL400 handles medium and rough machining on stainless steel and exotic alloys. Fine grain...

Read More »
Environmentally-Conscious Water Bottle Features Custom Cap Made of Thermoplastic Elastomer from KRAIBURG TPE
Rubber

Environmentally-Conscious Water Bottle Features Custom Cap Made of Thermoplastic Elastomer from KRAIBURG TPE

Reusable ‘Anti-bottle’® from Vapur Delivers Wide-Ranging Sustainability Benefits DULUTH, Ga.– An innovative, reusable water bottle developed by California- based Vapur®, one of the world’s leading designers of flexible, reusable, handheld products, features a custom cap made of a thermoplastic elastomer (TPE) from KRAIBURG TPE. The new Anti-bottle® - designed to stand...

Read More »
Testing Services

Suntron Corporation Offers EMS Services for Semiconductor Equipment

PHOENIX, AZ www.suntroncorp.com Suntron Corporation, a leader in integrated electronics manufacturing systems (EMS), announces that it offers a variety of manufacturing services, including large scale integration, for semiconductor capital equipment companies. Suntron offers multiple clean-room options to serve the needs of a wide range of product classes, and has developed diverse quality...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics