Custom Manufacturing Services

Tube Laser System accepts raw tubes to 24 ft.
Cutting Services

Tube Laser System accepts raw tubes to 24 ft.

Equipped with 1,000 W fiber laser, Model LT2012 processes small round tubes from 1/8–3 in. diameter, and square and rectangular tubes to 2 x 2 in. System is capable of cutting mild steel, stainless, aluminum, or copper. LT2012 can produce completed parts in one process – end profiles and internal features are cut in one pass. With touchscreen interface and magazine style in-feed, machine can...

Read More »
Additive Manufacturing Systems

3D Systems' Anchors San Jose's First Inside 3D Printing Conference

- Company's CEO to Deliver Keynote Address - Latest Consumer and Manufacturing Solutions Including Edibles and Metals On Display ROCK HILL, S.C.Â- – 3D Systems (NYSE:DDD) announced today that it will bring its consumer and professional 3D content-to-print experience to San Jose's first Inside 3D Printing Conference and Expo at the Double Tree by Hilton, San Jose, CA, from September 17-18,...

Read More »
Mazak Rolls Out 30,000th Kentucky-Built Machine
Automation Systems

Mazak Rolls Out 30,000th Kentucky-Built Machine

Customer takes delivery of company's most recent U.S. manufacturing milestone FLORENCE, Ky. – With numerous production advancements and innovations accomplished over the years, Mazak Corporation marks another significant U.S. manufacturing milestone at its Florence, Ky., plant with the completion of the 30,000th Mazak machine tool built at that facility. The machine, a QUICK TURN SMART 350...

Read More »
Nylon

Hex and Square Rods Readily Available at Emco Plastics

CEDAR GROVE, NJ – Emco Plastics, being a national leader in plastic distribution and manufacturing, has a 60,000 square foot facility housing an array of plastic sheet, rod, tubes, and profiles.Â-  We stock a wide range of sizes of Acetal and Nylon hex and square rods. Emco has readily available for immediate shipment the following sizes; square rods: ¼ inch to 1 inch and...

Read More »
Presses

Asia America Sources High-Value Machined Parts for Fortune 100 O.E.M.

Fortune 100 Domestic Supplier – Starter Challenge The components of this housing assembly were already sourced by Asia America.Â-  During an onsite customer visit, Asia America noticed the customer had hundreds of rejected starter motors and learned that for years, the customer had a 40% failure rate on final testing due to air leaks around a piston and O-ring assembly. Approach Asia...

Read More »
Asia America Provides Fortune 500 Heavy Equipment Manufacturer with Kitting & Subassembly of High-Value Machined Parts
Packaging Services

Asia America Provides Fortune 500 Heavy Equipment Manufacturer with Kitting & Subassembly of High-Value Machined Parts

Fortune 500 Supplier – Heavy Equipment Challenge A tier-one supplier to a Fortune 500 heavy equipment manufacturer sought a one-stop solution to reduce inventory, get more product out the door with less labor, decrease material handling and reduce the complexity of their manufacturing process. Approach Asia America's solution involved the reduction of 70+ parts into three kits for a model...

Read More »
Machining

D2S and NuFlare Extend Partnership to Accelerate eBeam Computational Design Platform Deployment for Advanced Photomasks

SAN JOSE, Calif. -- D2S®, a supplier of computational design platforms, today announced that it has extended its partnership with NuFlare Technology, a world leader in electron beam (eBeam) mask writing systems, to accelerate the deployment of eBeam technologies that reduce write times and improve the accuracy of advanced photomasks for future design nodes leveraging general purpose graphic...

Read More »
Machining

GE to Provide Turbomachinery Equipment and Services for Statoil's Gina Krog Platform Off the Coast of Norway

Order Marks Second Contract Implemented as Part of GE's 2013 Frame Agreement with Statoil GE to Deploy Latest SeaSmart™ Offshore Package Solution Featuring Compact and Lighter Design and Reduced Noise for Gina Krog Platform ABERDEEN, U.K.Â- – GE Oil & Gas (NYSE: GE) has been awarded a contract to provide Korean shipbuilding firm Daewoo Shipbuilding & Marine Engineering (DSME) with...

Read More »
NVision Helps "Shark Tank" Winner Expand Product Line
Additive Manufacturing Systems

NVision Helps "Shark Tank" Winner Expand Product Line

Coppell, TX – NVision, Inc. is helping ReadeREST, a recent winner on the ABC TV show Shark Tank", expand its line of magnetic reading glass clips by quickly and efficiently modeling common objects so they can be used as the basis for creating decorative new clip designs. NVision's Engineering Service Division is laser-scanning objects selected by ReadeREST, creating computer aided design (CAD)...

Read More »
Testing Services

What Is Standard Set-Up Data for Revalidation of Injection Molding Processes?

Traditional Revalidation In order to revalidate a mold to run in a different injection molding machine, traditional revalidation follows closely to the initial process validation procedures which include IQ, OQ and PQ. Installation (IQ):Â-  The process equipment along with all supporting and subsystems conform to the requirements of the manufacturer and are installed properly.  The...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers