Custom Manufacturing Services

Contractors

MS Energy Services Sets Charco Sand Drilling Record

Conroe, Texas - MS Energy Services is proud to announce that it set the Charco Sand drilling record for Devon Energy Corporation on June 23, 2011. The well included a 1,216 foot curve and 4,454 foot lateral, and averaged over 800 feet per day from spud to TD (not including casing point days). The overall ROP averaged 13.35 feet per hour in the curve section, and 38.35 feet per hour in the lateral...

Read More »
The Benefits of Quality Swiss Screw Machining offered by Crescent Industries
Machining

The Benefits of Quality Swiss Screw Machining offered by Crescent Industries

Crescent Industries, in New Freedom. Pa., offers quality Screw Machining Services http://www.crescentind.com/crescent_industries_production_machining.html. Life often gives second chances. Parachutists pull a ripcord and, if the parachute fails, there's another to rely on. Most vehicles have emergency brakes. Should the main brake fail, the emergency brakes offer a second chance. Professionals in...

Read More »
American Crane Can Meet Your Coating Requirements
Coating Services

American Crane Can Meet Your Coating Requirements

American Crane's Coating Specialists are: EXPERIENCED - Our Coating Technicians have applied numerous coating systems including Epoxy, Enamel and Zinc rich formulations. QUALIFIED - All our Coating Inspections are performed by Certified Coating Inspectors and surfaces/coatings are prepared in accordance with various SSPC Standards (including near white blasting to SSPC-10) in addition to...

Read More »
Molding Services

Beach Erosion Solution Sees Pilot U.S. Installation

After many years of investigation, research and development Granger Plastics Company has a pilot installation of its revolutionary Sandsaver product. The Sandsaver is a natural solution to beach erosion. The Sandsaver is a rotationally molded polyethylene module which both reduces erosion and builds beach at the same time. This practically indestructible part can be used over and over again to...

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Additive Manufacturing

Objet's 3D Printed Folding Stool as Tough as ABS-Grade Engineering Plastics

REHOVOT, Israel - Full-size Folding Stool Made of new Objet ABS-like Digital Material is Printed in a Single Print Job on the Objet Connex Multi-material 3D Printer Objet Ltd., the innovation leader in 3D printing for rapid prototyping and additive manufacturing, made news today by demonstrating a full-size folding stool able to support over 100 kg. Like the Objet 3D-printed skateboard, Objet...

Read More »
Marlin Steel Gets New Trumpf 3120 Press Brake
Fabrication Services

Marlin Steel Gets New Trumpf 3120 Press Brake

The Marlin Steel Press Brake brings precision to all your products - no matter what their shape, size or placement. The benefits are obvious; with the elimination of unnecessary tool changes, your costs are lower and the production of your sheet metal work is more precise. Part quality is increased. It simplifies the process of designing parts, allowing us to ship faster and more efficiently. o...

Read More »
OMAX® to Spotlight 80X JetMachining® Center with Advanced Accessories at CMTS
Abrasive Compounds / Media

OMAX® to Spotlight 80X JetMachining® Center with Advanced Accessories at CMTS

Kent, Washington, July 27, 2011 - OMAX Corporation will demonstrate its highly accurate 80X JetMachining Center at the 2011 Canadian Manufacturing Technology Show, taking place October 17-20 at the Direct Energy Centre in Toronto. Visitors to Spark & Co.'s booth 1910 will experience this large format abrasive waterjet system equipped with the revolutionary EnduroMax(TM) pump and Tilt-A-Jet®...

Read More »
Casting Process Simulation to Automotive Industry Standards
Software

Casting Process Simulation to Automotive Industry Standards

Continental communicates with its subcontractors through MAGMASOFT® Continental is one of the five biggest international automotive suppliers worldwide. The two group sectors, Automotive and Rubber, provide a range of products addressed to automotive trends in the areas of safety, environment and information. In 2009, the 143,000 employees in six divisions generated sales of approximately...

Read More »
Automated Polishing of Molds to Replace Manual Finishing
Polishers

Automated Polishing of Molds to Replace Manual Finishing

Designed for finishing glass press moulds, the process is suitable for polishing moulds of any material designed to manufacture super-high-precision components With increasing demand for low cost, high accuracy optical systems, manufacture of lenses and mirrors is moving away from direct machining of glass blanks towards glass press moulding. Aware of this trend, British CNC polishing machine and...

Read More »
New Turning and Machining Centres to Be Launched by Hurco
Lathes

New Turning and Machining Centres to Be Launched by Hurco

A total of eight machine tools, of which three will be on show for the first time in Europe, will be cutting metal on the Hurco stand at EMO 2011. Demonstrating the manufacturer's ever-broadening product range, the exhibits will include three different configurations of 5-axis machining centre as well as larger and multi-axis lathes. The new machines will include the BX30U machining centre, a...

Read More »

All Topics