Custom Manufacturing Services

4X Models GSC510 and GSC110 for select Citizen Swiss machines.
Machining

4X Models GSC510 and GSC110 for select Citizen Swiss machines.

Offering PCM Swiss made 4X high speed spindles, GSC510 and GSC110 from GenSwiss, provides better performance of micro drills, end mills and high speed thread milling tooling. Using planetary style gear system with low profile configuration, 4X models can be installed in Citizen A, L, M and L32 series machines. Product has good surface finishing with unique design to seal out oil and high...

Read More »
Methods 3D Expands Presence via New U.S. Additive Manufacturing Labs, Breakthrough Technology/ Presentations at IMTS and More.
Additive Manufacturing

Methods 3D Expands Presence via New U.S. Additive Manufacturing Labs, Breakthrough Technology/ Presentations at IMTS and More.

SUDBURY, MA. U.S.A. (October 28, 2016) – Methods 3D, Inc., a newly formed subsidiary of Methods Machine Tools, Inc. (www.methodsmachine.com), continues to broaden its presence in 3D printing through the completion of seven additive manufacturing laboratories strategically located across the U.S. In addition, at IMTS 2016 Methods 3D introduced exciting new advancements in 3D technology via an...

Read More »
CB51 Boards for CableEye surface mount and TH connectors.
Assembly Services

CB51 Boards for CableEye surface mount and TH connectors.

Suitable for all CableEye adapter boards, CB51 includes 4 sets of 60 solder pads of aligned and staggered pins at 1.25 mm and 1.5 mm pitch. Flexible for use in various configurations and combinations, device includes four preset locations for automatic detection and display of any-pin-count connector up to 60-pins. Rated to 700 Vdc or 500 Vac, unit comes with optional PinMap™software and is...

Read More »
New Capabilities and Machines from Reliable Metalcraft
Stamping Services

New Capabilities and Machines from Reliable Metalcraft

Reliable Metalcraft Corporation announces the recent addition of tool & die, engineering and design capabilities to help develop new products and concepts for its clients. These new capabilities will allow Reliable Metalcraft to better meet the needs of customers for unique specifications and custom metal stampings. The company has also added CNC milling, CNC lathes and Wire EDM machines....

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
Assembly Services

ETCO Innovates again by Customizing GBBA and FAE to Plug into PCB Boards

Bradenton, FL -- In order to solve a challenge for a manufacturer of smart power outlets, ETCO came up with a novel idea. Remove the ear sections on ETCO GBBA and FAE and replace them with pins that plug directly into a PCB board. They are then soldered in place. The ETCO GBBA plugs into the wall socket and consumers plug their devices into the FAE on the other side of the device. The power is...

Read More »
Grinding Services

Duval Increases Aerospace and Landing Gear Precision Grinding Capabilities to Meet Customer Demand

CHICOPEE, Mass. - An increasing number of aircraft manufacturers are turning to Duval Precision Grinding for landing gear precision grinding and surface finishing for landing gears. Duval is expanding its capabilities to accommodate this elevated demand, including the addition of new equipment to extend their OD, and jig grinding services. Aerospace OEMs trust Duval because of our longstanding...

Read More »
Perforating Services

Pure Energy Minerals Completes Successful Lithium Brine Pumping Test at Clayton Valley South Project, Nevada

Pure Energy Minerals Completes Successful Lithium Brine Pumping Test at Clayton Valley South Project, Nevada VANCOUVER, British Columbia -- Pure Energy Minerals Limited (TSX VENTURE:PE) (FRANKFURT:A111EG) (OTCQB:PEMIF) (the “Company” or “Pure Energy”) is pleased to announce that it has completed a constant-rate pumping test at its newest borehole, CV-3. The test ran continuously for...

Read More »
Glass

IMP Aerospace Awarded Chilean Navy Orion III (P-3 Modernization) Contract

HALIFAX, Oct. 17, 2016 - IMP Aerospace announced that it has been awarded a contract by the Chilean Navy (ACH) following an international competitive bidding process for the service life extension, depot maintenance and avionics upgrade of their P-3 Orion Maritime Patrol Aircraft. The ACH P-3 Orion aircraft play a critical role in detecting submarine threats, search and rescue, littoral/overland...

Read More »
Molding Services

Husky's HyperSync Integrated Specialty Closure System feature accurate and controlled closing of flip-top closures.

Designed to work together with mold, machine, hot runner and auxiliaries, HyperSync™ is a synchronized system that combines intelligent features and networking capabilities that highlight Industry 4.0-level connectivity, which delivers faster cycle times at a lower total part cost, with no impact to product quality. Useful in medical and specialty packaging fields, system comes with eIMC™...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics