Curing Systems

Curing Systems

LED Curing System offers 365 nm curing capability.

Suited for bench top and automated UV curing applications, SpotCure-B6 is available with 2 interchangeable light probes to cure UV adhesives in 365 and 395 nm ranges. In automatic operation mode, light activates ON when probe is removed from holder, and OFF when replaced in holder. Light delay of 1.5 sec allows accurate positioning of 12 mm light probe over work area, while selectable 10 sec...

Read More »
Curing Systems

UV Curing Lamp covers expansive area.

CON-TROL-CURE® Wide Area Flood Curing Lamp casts even irradiance over wide area. Placed at distance of 3 ft from material to be cured, unit projects effective cure area of greater than 5 x 5 ft. Fitted with adjustable lamp holders, housing accommodates lamps with total power from 250-1,000 W. Built in cooling system supplies correct amount of airflow to keep lamp at stable temperature. Lamp...

Read More »
Curing Systems

Light Curing System facilitates hearing aid fabrication.

ResinAid self-contained UV/visible light cure oven produces hearing aid shells using Loctite ResinAid molding compounds. System has 18 x 43 x 27 in. chamber, fully shielded and interlocked to ensure safe operation. Air cooling prevents devices from overheating, and reflector design provides uniform light distribution. Top-loading 8 x 8 in. curing chamber irradiates multiple assemblies...

Read More »
PWB Curing System cures multi-film circuit boards.
Curing Systems

PWB Curing System cures multi-film circuit boards.

With compact, modular design, Xenon PWB (printed wiring board) Pulsed UV/Visible Curing System employs pulsed UV/visible light to cure multi-film flexible circuit boards without damaging products. Mercury-free system features serpentine lamp, with 1 x 3 in. optical profile, that produces peak power from 405-1,811 W/cmÂ-². It provides instant on/off and can be mounted onto stationary or...

Read More »
Curing Systems

UV Wand System is suited for spot curing adhesives.

Loctite ZETA 7735, designed for Â-¼-1 in dia spot curing applications, offers up to 7 W/cm² of UV light at 250-410 nm. It uses 50 W metal halide arc lamp with universal power supply and liquid-filled light wand. Lamp, which features elliptical reflector and custom coating, has 2,000 hr life expectancy. System may be operated manually or with timed shutter light exposure from 0-99.9...

Read More »
UV-Curing System handles heat-sensitive substrates.
Curing Systems

UV-Curing System handles heat-sensitive substrates.

Cure Tunnel(TM) utilizes 4 asymmetrically mounted lamps to provide curing power to substrate. Each 400 W/in. lamp is fixed at 45° angle. Lighting, combined with housing geometry, enables unit to exhibit satisfactory cure at speeds exceeding 350 ft/min when running at half-power (200 W/in.). Dual-lamp layout and 10 in. focus allow for air circulation. System is capable of curing heat...

Read More »
Curing Systems

UV Wand System spot cures adhesives.

ZETA® 7730 offers up to 4 W/cmÂ-² of UV light at 320 to 410 nm, delivering tack-free surfaces when used for light-cure adhesives. System utilizes auto-ranging 60 to 265 Vac, 50 to 60 Hz solid-state power supply, 50 W metal-halide lamp, and liquid light guide. Typical cure area is 0.5 in. diameter. Exposure time is controlled by programmable timed mode (0 to 99.9 sec) or manual mode,...

Read More »
Rod Lenses deliver uniform UV cures.
Curing Systems

Rod Lenses deliver uniform UV cures.

BlueWave(TM) 200 W UV spot/wand light, fitted with rod lens assembly, provides uniform illumination for curing adhesives and coatings from .75 x .75 up to 5 x 5 in. Rod lens No. 38699 cures adhesive or coating areas from 3/4 in. square at 1,500 mW/cmÂ-² to 2 in. square at 115 mW/cm². Rod lens No. 38698 cures adhesive or coating areas from 2 in. square at 125 mW/cm² to 5 in....

Read More »
Curing Systems

UV Chamber uniformly cures small parts and assemblies.

Chamber comes with top mounts for exposing sample to optimum light in out-of-focus position. Designed for use with PowerCure 3, Model DRE-3, made of see-thru acrylic, has exposure shelves that can raise samples 2 to 6 in. from bottom. DRE6-110 is built for PowerCure 3 and all 6 in. lamp modules. Made of metal, it is available with adjustable sample stage. DRE6/10-10 is for use with 6 and 10 in....

Read More »
Curing Systems

UV Curing System operates in power class of 500 watts/in.

Six inch Light Hammer 6 consists of 2 modular components: microwave-irradiator and solid-state power supply. Electrode-less bulb, mounted in elliptical reflector, focuses intense strip of light 2.1 in. below surface of lamp. System repeatedly cycles from high power to very low power over a few seconds. Power output from 25 to 100 percent is controlled from front panel or remotely through analog...

Read More »

All Topics