MEI Places New Data Equipment for Dallas Justice Center with a Helicopter
DALLAS, Nov. 30, 2016 -- The Helicopter overhead in SE Dallas early morning last Saturday wasn't the local traffic reporters. Instead, it was the installation of data equipment at the Lew Sterrett Justice Center in West Downtown Dallas. MEI Rigging & Crating used a helicopter, three forklifts, and a small mobile crane to complete the move in less than one hour. In that hour, they moved about...
Read More »
ALL Invests in New Liebherr All-Terrain Cranes Ahead of Their U.S. Debut
LTM 1450-8.1 to be unveiled at spring CONEXPO Show November 29, 2016- The ALL Family of Companies announces that they have preordered several new Liebherr models as yet unavailable in the United States - including two LTM 1450-8.1 500-USt all-terrain cranes. The Liebherr Group plans to debut the LTM 1450-8.1 at the 2017 CONEXPO-CON/AGG show (March 7-11, Las Vegas). With a powerful 279-foot...
Read More »
ALL Invests in New Liebherr All-Terrain Cranes Ahead of Their U.S. Debut
LTM 1450-8.1 to be unveiled at spring CONEXPO Show November 29, 2016- The ALL Family of Companies announces that they have preordered several new Liebherr models as yet unavailable in the United States - including two LTM 1450-8.1 500-USt all-terrain cranes. The Liebherr Group plans to debut the LTM 1450-8.1 at the 2017 CONEXPO-CON/AGG show (March 7-11, Las Vegas). With a powerful 279-foot...
Read More »American Crane and Equipment Corporation Manufacture Turbine Cranes: The Gentle Giants of Overhead Lifting Equipment
American Crane and Equipment Corporation recently engineered and manufactured turbine cranes for several generating stations. In the world of cranes, turbine cranes are some of the largest and most powerful overhead lifting machines made. Douglassville, PA November 11, 2016 American Crane & Equipment Corporation, a manufacturer of overhead electric cranes and hoists, has recently completed the...
Read More »Finding the Right Bore Configuration for your Application
There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!
Read More »American Crane and Equipment Corporation Manufacture Turbine Cranes: The Gentle Giants of Overhead Lifting Equipment
American Crane and Equipment Corporation recently engineered and manufactured turbine cranes for several generating stations. In the world of cranes, turbine cranes are some of the largest and most powerful overhead lifting machines made. Douglassville, PA November 11, 2016 American Crane & Equipment Corporation, a manufacturer of overhead electric cranes and hoists, has recently completed the...
Read More »
Norheim Hoist meets CMAA Class D Duty of up to 60 Ton Capacity.
Available with capacities ranging up to 160 tons, Norheim Hoist meets requirement of Crane Manufacturers Association of America (CMAA) Spec # 70. With two speed hoists and trolley controls of up to 20 horsepower, utilizing standard magnetic contactor controls, hoist allows lifting speed to increase for loads that weigh up to 30% of the rated load capacity. Unit can be utilized for foot mounted,...
Read More »
Norheim Hoist meets CMAA Class D Duty of up to 60 Ton Capacity.
Available with capacities ranging up to 160 tons, Norheim Hoist meets requirement of Crane Manufacturers Association of America (CMAA) Spec # 70. With two speed hoists and trolley controls of up to 20 horsepower, utilizing standard magnetic contactor controls, hoist allows lifting speed to increase for loads that weigh up to 30% of the rated load capacity. Unit can be utilized for foot mounted,...
Read More »
Innovative H-Gantry Design with Large Theta
Repeatability and accuracy are essential characteristics of any motion control system, and the objective of the design is to assure the desired trajectories can accurately follow through the working range of the system. In traditional XY gantry designs upper gantry member (Y axis) is carried by two identical bottom axes (X1 and X2). Each X1 and X2 axes motor/screw/bearing systems are separated by...
Read More »
Innovative H-Gantry Design with Large Theta
Repeatability and accuracy are essential characteristics of any motion control system, and the objective of the design is to assure the desired trajectories can accurately follow through the working range of the system. In traditional XY gantry designs upper gantry member (Y axis) is carried by two identical bottom axes (X1 and X2). Each X1 and X2 axes motor/screw/bearing systems are separated by...
Read More »Ace to Supply Custom EOT Crane with Three Hoists for Steel Facility
Overhead crane and hoist manufacturer Ace World Companies has received an order for a custom hot metal ladle crane with three hoists from Nucor Steel Kankakee Inc. in Illinois. The 175/35/15 ton capacity crane will have a 70ft span, 460 VAC power supply and meet Crane Manufacturers Association of America (CMAA) duty classification F. CMAA Class F covers continuous severe service and is reserved...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
