Shaft Couplings

Couplings feature torsional vibration isolation.

Available in 64 Inch and 64 Metric, Neo-Flex Couplings feature shaft-to-shaft insulation, 73 durometer molded Neoprene center, and 303 stainless steel hubs. Conventional pin type hubs use set screw for fastening, while Fairloc® integral hub fastener eliminates marred shafts and permits frequent phase adjustment, timing, and position adjustment. Offered with ribbed or smooth center sections,...

Read More »
Coupling is offered in nickel-plated zinc.
Couplings (Fittings)

Coupling is offered in nickel-plated zinc.

Die-cast, quick disconnect ZLC coupling comes in nickel-plated zinc that suits high-volume production applications in marine, instrumentation, cooling, food and beverage, and hand tool industries. It is resistant to gasoline, ink, air, and water and has operating temperature of -10 to 150°F. ZLC is offered in panel mount or in-line configurations and terminations including hose barbs and...

Read More »
PLC Couplings utilize radio frequency identification.
Couplings (Fittings)

PLC Couplings utilize radio frequency identification.

IdentiQuik PLC Series electronically verifies line connection accuracy and captures fluid and product data from point-of-origin through point-of-use. Thumb latch allows 1-handed connection and disconnection, while audible click indicates secure union. Made from acetal thermoplastic, couplings operate from vacuum to 120 psi and -40 to 180°F. Applications include analytical instrumentation,...

Read More »
Coupling can be replaced in place.
Couplings (Fittings)

Coupling can be replaced in place.

Wrapflex non-lubricated coupling is optimized for use on NEMA and ISO motor frames. It allows replacement of element moving the connected equipment, reducing service downtime. Combination of compression design, misalignment capacity, and vibration damping enables smaller size couplings to be utilized in many applications.

Read More »
Taper-Threaded Splices connect 2 pieces of rebar.
Miscellaneous Fasteners

Taper-Threaded Splices connect 2 pieces of rebar.

Available in sizes 10-57 mm, LENTON® Splices are designed for worldwide grades of rebar and meet ACI-318, BS 8110, and DIN 1045 full-tension splice requirements. Taper-threaded range consists of standard and transition couplers, as well as positional couplers to join bars of any shape, size, and diameter. Weldable and bolt couplers are also available for joining structural steel to...

Read More »
Couplings (Fittings)

Couplings promote clean chemical/solvent/fuel transfer.

Designed for transfer of hazardous materials, dry disconnect couplings facilitate connection and disconnection of hoses and pipelines while eliminating accidental spillage and product loss. They are available with stainless steel, aluminum, or brass construction in 1-4 in. sizes and feature built-in swivel. Design options include Hastelloy® C276 internal parts, Teflon® bushings, and...

Read More »
Hybrid Coupler suits RF/microwave and telecom applications.
Signal Couplers

Hybrid Coupler suits RF/microwave and telecom applications.

Quadrature 3 dB Coupler, Model IMD 2297 operates at 6 GHz with bandwidth of 10%. Typical VSWR in matched 50 Ohm alumina system is 1.25:1 or better with input isolation of 18 dB or better. Measuring .322 x .322 x .025 in., surface mount, thick film unit on aluminum nitride substrate features .205 in. terminal spacing and input power up to 20 W, depending on base plate temperature.

Read More »
Couplings feature integrated attachments.
Shaft Couplings

Couplings feature integrated attachments.

One-piece flexible couplings can be combined with multitude of end connections and coil configurations for variety of applications. They may be specified in various materials and will accommodate for angular, parallel, or skewed misalignments. Optimal performance is achieved with use of magnetic or non-magnetic, corrosion-resistant stainless steels, aluminum alloys, titanium, and Delrin.

Read More »
Miniature Couplings are suited for micro applications.
Shaft Couplings

Miniature Couplings are suited for micro applications.

Available in aluminum or stainless steel, single-piece beam couplings feature multiple spiral cuts to accommodate angular and parallel misalignment as well as axial motion. They come in 20 sizes with ODs as small as 3/8 in. and bores as small as 3/32 in. Offered in 7 sizes of set screw or clamp style hubs, Oldham couplings are comprised of 2 aluminum hubs with drive tenons that mate with floating...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers