Couplings (Fittings)

Quick Safety Couplings feature ergonomic design.

Quick couplings for compressed air circuits enable operators to automatically trigger closure of upstream circuit, decompression of downstream circuit, and disconnection of plug as soon as pressure is low enough. Units feature rotating button, and lightweight, ergonomic design that follows operator movements. Providing safety of workstations and personnel inÂ- workshops, couplings are...

Read More »
Couplings (Fittings)

Antipollution Connection on Hydraulic Oil Circuits with Safe, Reliable, and Efficient STÄUBLI SBA Couplings

The SBA design eliminates residual dead internal volume : no release of oil specific volume at disconnection neither introduction of the same specific air volume at connection. Â-· Automatic one handed connection and disconnection. · Robust and protected locking mechanism. · Sealing parts protected from external impacts. · Direct flow of the fluid stream : very small...

Read More »
Clamp Style Hub Couplings handle large shafts, high torque.
Shaft Couplings

Clamp Style Hub Couplings handle large shafts, high torque.

Featuring clamp style hubsÂ- designed for optimal shaft engagement, ServoClass® couplings are designed for high-speed reversing loads and precise positioning requirements in servomotor applications at speeds up to 10,000 rpm. Clamping strength eliminates need for keyways while providing clean, balanced design. Available in 12 sizes in single- and double-disc models, couplings...

Read More »
Inch Couplings allow for large angular misalignments.
Shaft Couplings

Inch Couplings allow for large angular misalignments.

Featuring lattice design, S50CLM and S50SCLP Series allow for large axial, radial, and angular misalignments while transmitting high torque loads with zero backlash. Units are available with bores from .125–1.250 in., max angular offset of 7°, and max torque from 5–300 lbf-in. Available in 35 models, couplings have 6061 aluminum hubs, 420Â- stainless steel or polyamide...

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
Couplings (Fittings)

Performance Across the Board for Connecting Hydraulic Circuits

StÃ-¤ubli CBX flat-face, spill-free couplings combine all the benefits of our features for maximum performance. Spill-free technology ensures operator safety: - no discharge and no work place contamination, - protection for tools and production. Pollution-preventing flat faces guarantee the integrity of fluids and gases: no pollution can enter your circuits. Automatic locking CBX couplings...

Read More »
Couplings (Fittings)

Stäubli CBI Coupling Range

STÃ-„UBLI boosts performance across the board. For connecting your control and cooling circuits With the development of its range of CBI non-spill flat-face couplings, Stäubli has pushed the limits of performance. Non-spill technology ensures operator safety: - no discharge or work place contamination, - protection for tools and production. Pollution-preventing flat faces guarantee...

Read More »
Inch Couplings feature lattice design for large misalignments.
Shaft Couplings

Inch Couplings feature lattice design for large misalignments.

Featuring lattice design, S50CLM and S50SCLP Series allow for very large axial, radial, and angular misalignments while transmitting high torque loads with zero backlash. Units are available in bore sizes from .125–1.250 in. with maximum angular offset of 7° and maximum torque from 5–300 lbf-in. Offered in 35 models, couplings are constructed with 6061 aluminum hubs, 420 stainless...

Read More »
Ultra-Broadband Directional Coupler covers 1.0-50.0 GHz range.
Signal Couplers

Ultra-Broadband Directional Coupler covers 1.0-50.0 GHz range.

Featuring stripline design, Model 101050013 offersÂ- 1.0–50.0 GHz range with coupling of 13 dB ±1.0 dB, frequency sensitivity of ±1.0 dB, and directivity of greater than 10 dB. Product exhibits insertion loss, including coupled power, of less than 1.6 dB from 1.0–26.5 GHz and less than 2.9 dB from 26.5–50 GHz. Max VSWR (any port) is 1.5 from...

Read More »
Single and Double Disc Couplings handle up to 4 nm torque.
Shaft Couplings

Single and Double Disc Couplings handle up to 4 nm torque.

Designed for 5-14 mm bore diameters, ServoClass® SD025R and SC025R Couplings handle high-speed reversing loads and precise positioning requirements in demanding servomotor applications at speeds up to 10,000 rpm. RoHS-compliant units are constructed with 304 SS disc packs and aluminum clamp style hubs and center members. To ensure precise alignment of assembled components, ISO 4762 CL12.9...

Read More »
Shaft Couplings

Stäubli Connectors to Showcase New Connection Solutions for the Motorsports Industry at IMIS 2012

DUNCAN, SC - StÃ-¤ubli Connectors will showcase the latest connection solutions for the motorsports industry at the International Motorsports Industry show December 6-8 in Indianapolis, Indiana. IMIS 2012 is your destination to explore the newest equipment and innovative technology in the motorsports industry. World-class exhibitors, technical seminars, endless networking, banquets, special...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers