New Couplers and Couplings Products

Collars and Couplings are made from 316 stainless steel.

Shaft collars and couplings are designed for use in machinery exposed to harsh chemicals, corrosives, or frequent washdowns. Supplied with 18-8 or 316 stainless steel fasteners, they are available in set-screw, 1-piece, and 2-piece styles. Collars have smooth bore and come in sizes from Ã-¼-10 in. ID, while couplings come in sizes from Ã-¼-3 in. ID. Collars are also available as specials...

Split Couplings connect conduit in tight spaces.

Featuring protruding compression mechanism, Split Couplings allow 2 pieces of conduit to be connected in tight spots where channel locks are difficult to use. Whether conduit runs are installed side-by-side, or tight against wall, ceiling, or other obstruction, installations only require adjustable wrench.

Fittings suit agricultural water applications.

Offered in sizes up to 12 in., Agri-Lock fittings and couplings provide quick-disconnect capability for non-hazardous applications. Suited for agricultural suction and discharge of water, as well as for irrigation and dewatering applications, products are made of galvanized steel and feature ball-head design that allows for offset coupling. Pin-locking device is available to provide extra...

Coupling Elements offer space saving design.

Suited for limited installation conditions, 2-part elements can be integrated into fixture designs and used to transmit hydraulic oil or compressed air in machines with pallet transfer systems, from machine tool table to fixture. Offered with 3 nominal diameters for optimum adaptation to flow rate, flush-faced coupling mechanisms come in built-in and threaded-body styles that allow large axial...

5 Key Questions to Ask Before Choosing a Custom Welding Company

This white paper provides an in-depth overview into choosing a custom welding company by highlighting five questions you should ask a potential welding partner to determine whether they are right for your custom welding project.

Relay-Couplers replace transmission and switch combinations.

Series AMB/A-RE-C relay-couplers transmit signal without distortion while maintaining network performance where groups of equipment need to be simultaneously disconnected. In addition to transmitting to device signals conforming to MIL-STD-1553B, they can also switch signal to another line or to particular component on demand. Suited for missile applications, Series AMB/A-E-D couplers can switch...

Quick Release Couplings have self-venting capabilities.

Bi-Tec Series quick release couplings utilize combination of sliding valve and quick lock mechanism. With pressure-less coupling, only resistance is force of spring. Pushing blue sliding valve forward allows pressure to build up, and venting process starts when sliding sleeve is moved into home position. Available in industry standard sizes, products can be manufactured out of brass, steel,...

Couplings are used in flatbed scanning products.

Manufactured from low-inertia grade 7075-T6 aluminum, Reli-a-Flex(TM) couplings have slit pattern with radial slits that gives products high torsional stiffness. Tested to 50 million cycles at rated torque, couplings are suited for high duty cycle applications such as printing and typesetting. Products are also suited for accurate positioning and responsive servo systems.

Dry Disconnect Couplings offer working pressure of 150 psi.

Available in sizes from 1Ã-½-4 in., stainless steel Dry Disconnect Couplings are suited for transfer of chemicals, solvents, and fuels. They allow for connection and dis-connection of hoses and pipelines while eliminating accidental spillage and product loss. Built-in swivel allows operator to use push-and-turn action to connect and start product flow. Turn-and-pull action disconnects coupler...

Flexure performs multiple functions.

Provided in form of coupling or U-joint, HELI-CALÃ-® flexure performs multiple functions without separate parts or associated maintenance and backlash involved with rotating equipment. Unit is machined from single piece of material, and can be manufactured into variety of shapes and sizes to suit user's preferences.

Autocoupler is designed for rotary tables.

Autocoupler enables unmanned cable connection of rotary tables in pallet pools. Able to address 400 mm pallet applications and larger, unit fits most HMCs. First side is fixed to center post of HMC, on pallet shuttle door, and other side of coupler is mounted to back side of rotary table. Once machining is complete, PLC and cell controller communicate, Autocoupler disconnects, and pallet moves...

5 and 13 Micron Resolve Columns with Greater Bed Stability

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.