Brass Shaft Collars and Couplings resist corrosion and galling.
Shaft Couplings

Brass Shaft Collars and Couplings resist corrosion and galling.

Machined from C360 brass or optional C464 Naval brass, Stafford Brass Shaft Collars come in 1- and 2-piece styles with stainless steel fasteners as well as set-screw and hinged styles. These products, offering alternative to 304 and 316 stainless steel products, are designed for secure hold and come in 6 standard sizes from ½–1 ½ in. ID for commercial, industrial, and military...

Read More »
Rigid Couplings are specified for shaft joining, alignment.
Shaft Couplings

Rigid Couplings are specified for shaft joining, alignment.

Used to join or alignÂ- 2 shafts within motor or mechanical system, ReliaMark rigid couplings are manufactured in SAE 1008 mild steel and come in 60+ sizes with ¼–1 ½ in. bore. Products include solid set-screw, one-piece (single-split), and 2-piece (double-split) couplings. All feature black oxide finish and socket head cap screws. Effective on hard and soft shafts,...

Read More »
Shaft Couplings

Quick Disconnect Couplings are specified for dual fluid lines.

Designed for use with dual fluid lines, DPC Series offers intuitive, simultaneous connections and disconnections with one thumb latch. TheseÂ- Ã‚¼ in. flow couplings, offered in acetal thermoplastic, are available in valved and non-valved hose barb configurations and keyed to ensure correct directional flow. Other features of this quick disconnect coupling series include integral...

Read More »
High-Speed Logic Gate Optocoupler comes in 8-pin SOP.
Electrical Isolators

High-Speed Logic Gate Optocoupler comes in 8-pin SOP.

Suited for serial and field bus interface isolation in industrial applications, single-channel EL071L consists of IR emitting diode optically coupled toÂ- CMOS detector IC. SMD device is Pb-free, halogen-free, and RoHS compliant; offers 15 Mbps data transmission rate; and operates from -40 to +110°C. Other features include 3.3 and 5 V CMOS compatibility, CMR of >10,000...

Read More »
Shaft Couplings

Disc Couplings suit high torque applications.

Offering lubrication-free service, SKF Disc Couplings have capacity range up to 178 kNmÂ- and come in variety of configurations, including single disc, double disc, and spacer for both horizontal and vertical mounting. Units consist of 2 hubs and laminated stainless steel disc pack secured by series of fitted bolts retained by nylon insert lock nuts. Single disc...

Read More »
Couplers and Couplings

ASCO Sintering Co. Custom Manufacturers New Advanced Shift by Wire Components for the Automotive Industry

Effective September 1st 2015 ASCO Sintering Co. will begin supplying a tier 1 automotive supplier with new multiple automotive sintered components used in 2016 MY “Shift by Wire” technology for effortless gear shifting. The Compound gear, Output Gear, Trigger Arm, Trigger link and couplings are net shape and were custom engineered and produced using a broad spectrum ofÂ-  advanced powder...

Read More »
Millimeter Waveguide Directional Couplers operate up to 110 GHz.
Signal Couplers

Millimeter Waveguide Directional Couplers operate up to 110 GHz.

Covering 18–110 GHz inÂ- K, Ka, Q, U, V, E, and W bands, 28 models of precision waveguide directional couplers are offered with 10 or 20 dB coupling values and directivity of 30 dB typ with insertion loss as low as 0.6 dB. Standard and split block configurations as well as E-Bend and H-Bend designs are available, and multi-hole design promotes optimal power reflection measurements...

Read More »
Structured Wiring Solutions aid data/voice/video installation.
Electrical Connectors

Structured Wiring Solutions aid data/voice/video installation.

Featuring 50 micron gold contacts, Keystone Jacks and Couplers for Cat3, Cat5e, Cat6, and Cat6A applications are color coded to facilitate EIA/TIA 568A/B wiring. Products meet/exceed EIA/TIA category standards and are compatible with industry standard wall plates. Compatible with industry standard keystone jacks and EZ-SnapJacks, 1-, 2-, and 4-port Wall Plates are engineered to prevent possible...

Read More »
Closed System Dispensing of Bulk Chemicals Makes Foam and Coating Applications Safer and More Efficient
Dispensers

Closed System Dispensing of Bulk Chemicals Makes Foam and Coating Applications Safer and More Efficient

Used in a two-part foam applicator unit from Specialty Products, Inc., CPC’s DrumQuik® PRO dispensing system protects workers and materials. Two-part urethane foams and polyurea elastomer spray-on coatings are found in diverse applications, from construction uses, such as home insulation, commercial roofing and joint fillers, to waterproofing of fishing vessels and submarines. The...

Read More »
Tooling Changers

ATI Industrial Automation's Annual Technology Fair Scheduled for August 13th, 2015

Apex, North Carolina: ATI Industrial Automation will host their Annual Technology Fair at the Michigan Sales Office located at 4577 South Lapeer Road, Suite I, Orion Township, MI 48359. On Thursday, August 13th, discussions will detail the many new end-effector products developed by ATI over the past year along with their existing state-of-the-art products. ATI will provide cost-effective...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics