New Cores Products

Embedded Processor is available in 3 versions.

NiosÃ-® II family consists of three 32-bit RISC embedded soft-core processors that deliver more than 200 DMIPS: one for maximum system performance, one optimized for minimum logic usage, and one in-between. All cores are 100 percent code compatible and include software development suite with compiler, IDE, JTAG debugger, MicroC/OS-II RTOS, and TCP/IP stack. Developers can also add up to 256...

Video Core targets digital television applications.

Model CS7050 high-definition H.264/AVC hardware video decoder core supports wide range of image resolutions, both HD and ST at Main Profile up to Level 4.1. Unit includes direct interfaces to SoC memory control system for storage of reference and decoded pictures in system-wide shared memory. Available on both ASIC and FPGA technologies, core decodes Main Profile video streams at resolutions up...

Processor Cores are based on 8-stage pipeline.

Series MIPS32Ã-® 24K(TM) 32-bit, 550 MHz synthesizable processor cores offer 1.44 Dhrystone MIPS/MHz performance in core area of less than 3.0 mmÃ-². Development support includes tailored, front-to-back-end design methodologies and standard, Open Core Protocol interconnect structure. Hardware branch prediction is present to keep pipeline supplied with instructions. Units are targeted at...

FFT IP Core is suited for FPGA co-processors.

Fully integrated fast Fourier transfer (FFT) IP core, FFT MegaCoreÃ-® Function 2.0, enables system designers to off-load computationally intensive FFT functions to FPGA co-processor. It delivers up to 16 K points of resolution as well as max clock frequency in excess of 300 MHz. IP core, comprised of FFT, data RAM, and twiddle ROM, includes IP toolbench GUI and quad-output Radix 4 FFT engine...

The Ultimate Guide To UV Disinfection Lighting

This white paper provides a guide to UV disinfection lighting and their benefits over alternative disinfection methods.

Embedded DSP Core runs above 600 MHz.

Based on Model ST100 DSP architecture, Model ST122 Dual MAC core is supported by evaluation chip fabricated in 130 nm technology and complete development platform. It can be mapped into versions ranging from ultra-low power to high-speed operation. Flexible instruction modes allow mixture of 16, 32 and 128-bit instructions. Evaluation device includes 16 kbytes of L1 Program cache, 256 kbytes of...

Microarchitecture lays foundation for synthesizable cores.

MIPS32(TM) 24K(TM) provides single issue, 8-stage pipeline; hardware-based cache coherency to support multi-processor scaling; configurable memory management unit with TLB or fixed mapping; and 64-bit memory subsystem with up to 6 read transactions. Cores based on microarchitecture offer 400-500 MHz performance in 0.13 Ã-µm process.

IP Core Bundle provides multiple VHDL-based communications.

Comm Core Bundle includes 5 related communication IP Cores written in VHDL programming language. They include Complex Multiplier/Mixer, Numerically Controlled Oscillator, Linear Feedback Shift Register, Binary Pattern Correlator, and Early/Late Gate Symbol Synchronizer. Bundle is offered as stand-alone product or as upgrade to Constellation Development System.

Power Transformer Core has circular cross section.

O-Core uses silicon steel strip, gradually pointed towards end. Transformers wound on O-cores are 15% smaller in size and weight than toroidal transformers. Available with power ratings from 20 to 1200 VA, 50-60 Hz operation, O-cores use grain-oriented silicon steel. With fully rounded edges, transformer does not require epoxy fluidizing or injection molded core jackets, and can be insulated by...

Common Mode Filters are suitable for power applications.

CSF Series have ungapped H ferrite cores with split-section bobbins that have been tightly wound to ensure constant leakage inductance. Dielectric withstanding voltage is 1.5 kV and temperature rise at maximum current is 45 deg C. Filters are available with with vertical or horizontal core mounting, inductance values of 1 to 120 mH, and in industry standard footprints.

Minature Molds are ground from stainless steel.

Rosspunch custom engineered mold components are precision ground with intricate multi-diameter details ranging from 0.020 to 1.00 in. with diameter tolerances to 0.0001 in. Ground from either 300 series or 400 series stainless steel, they can be produced with custom head styles and precision ground ends incorporating radii, flats, and odd shapes. Mold components can be made in custom lengths up...