DAC offers 6 software-programmable outputs.
Electronic Converters

DAC offers 6 software-programmable outputs.

Operating from single 2.7-5.5 V supply, dual 16-bit Model LTC2753-16 draws max supply current of 1 Â-µA and can output SoftSpan(TM) unipolar ranges of 0-5 V and 0-10 V, as well as 4 bipolar ranges of ±10, ±5, ±2.5, and -2.5 to +7.5 V. Unit offers accurate dc specifications, including ±1LSB max INL and DNL over -40 to +85°C industrial temperature range. Housed in...

Read More »
Electronic Converters

Digital Transmitter suits software defined radio applications.

Available in 5 ruggedization levels, ICS-8560 includes 2 transformer-coupled analog outputs with 16-bit resolution and supports sampling frequencies up to 200 MHz in single data rate mode and up to 400 MHz in double data rate mode. Featuring Xilinx Virtex-4 FPGA in combination with onboard digital-analog conversion resources, it allows VHF waveforms to be processed and converted directly on XMC...

Read More »
A/D Converter handles communications and DAQ applications.
Electronic Converters

A/D Converter handles communications and DAQ applications.

Model AS1542 12-bit successive-approximation A/D converter features 16 input channels that are software-configurable as 16-channel single-ended or 8-channel fully-differential analog inputs. At conversion speed of 1 MS/sec, it uses as little as 2.4 mA, while in automatic shutdown mode supply current drops to less than 0.5 Â-µA. Device operates from 2.7-5.25 V supply and contains Vdrive...

Read More »
Electronic Converters

10G Ethernet LAN-PHY Mapper is suited for WDM networks.

Targeting Ethernet mapping and transport applications, MB87Q2091 dual-channel, multi-rate OTN mapper supports seamless integration to XFP modules on client side and to standard 10G and 40G FEC devices on network side. It enables transport of multiple service types (synchronous and asynchronous) and can also function as multiple-standard interface converter (XFI/SFI-4/SFI-5s) as well as 2.5G or...

Read More »
Electronic Converters

LG Electronics Digital-to-Analog Converter Box Certified by U.S. Commerce Department

Company Prepares to Start Mass Production to Support Early 2008 Launch WASHINGTON, Oct. 8 / - In a key milestone in the nation's transition to digital television (DTV), the digital-to-analog converter box developed by LG Electronics has been officially certified for the National Telecommunications and Information Administration (NTIA) digital-to-analog converter box program. The NTIA, part of the...

Read More »
Micro-power ADCs offer 150 Ksps max sample rate.
Electronic Converters

Micro-power ADCs offer 150 Ksps max sample rate.

Available in 8-pin, 3 x 3 mm TDFN package, 10-bit AS1528/29 suit battery-powered devices and portable DAQ systems. Both AS1528 single-channel fully differential ADC and AS1529 dual-channel single-ended ADC consume less than 350 Â-µA at max sampling rate. Automatic shutdown (sleep mode) between conversions enables lower rates of power consumption down to 2.5 µA at 1 Ksps or 200 nA...

Read More »
Electronic Converters

D/A Audio Converter consumes 13 mW at 1.8 V.

Integrating Class D speaker amplifiers and stereo headphone drivers, 24-bit CS43L22 low-power stereo D/A converter provides 1 W per channel Class D amplification to external speakers and enough power to drive 44 mW per channel into stereo headphones. Portable device allows core to be run from single power supply and amplifier to be directly connected to battery supply. It features master clock...

Read More »
Electronic Converters

Media Converter gives users ability to control bandwidth.

Model TC3240 10/100M 4-port Switching/Bridging Fiber Optic Ethernet Media Converter converts or connects 10/100Base-TX (UTP) networks to 100Base-FX (Fiber Optic) networks. Password-protected unit provides 10/100 Mbps Auto-Negotiation, automatically adapts to full or half-duplex mode, and includes built-in switch that enables distances up to 100 km without additional hardware. Industrial hardened...

Read More »
Electronic Converters

Analog Devices Debuts Integrated Precision DACS for Industrial Automation Systems

- New DACs simplify factory process control and industrial system design by offering improved performance with a high level of control functionality in a compact package. Norwood, MA(10/8/2007) - Analog Devices, Inc. (NYSE: ADI), a world leader in semiconductors for signal processing applications, today introduced new precision digital-to-analog converters (DACs) that significantly improve the...

Read More »
Digital-to-Analog Converter features integrated EEPROM.
Electronic Converters

Digital-to-Analog Converter features integrated EEPROM.

Housed in 6-Pin SOT-23 package, 12-bit single-channel Model MCP4725 has buffered voltage output and is suited for space-constrained portable and battery-powered applications. Non-volatile EEPROM enables settings to be recalled at power up, eliminating need for microcontroller. With power consumption of 0.06 Â-µA in shutdown, unit helps extend battery life. Onboard output amplifier enables...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics