ADC operates on dual power supplies, 1.8 and 3 V.
Electronic Converters

ADC operates on dual power supplies, 1.8 and 3 V.

Available with footprint of 10 x 10 mm, dual-channel 16-bit, 160 mega-samples/sec pipeline ADC, ADC16DV160 delivers 91.2 dBFS spurious-free dynamic range, 76.3 dBFS signal-to-noise ratio and 97.3 dBFS higher-order harmonic distortion at 197 MHz input frequency. Product consumes less than 650 mW, and offers input-bandwidth of 1.4 GHz. It is targeted at multi-carrier, multi-standard GSM/EDGE,...

Read More »
Signal Converter manages HD data, A/D source switching.
Signal Processors

Signal Converter manages HD data, A/D source switching.

Supplied as rack-mountable enclosure, DMCI (DigitalMedia(TM) Card Interface) houses one DM Input Card to accept any AV source, including all analog audio and video, computer, HDMI, DVI, and DisplayPort signals, and output those signals as HDMI. It also handles USB-HID over Ethernet for remote wireless keyboard/mouse control and outputs them as HDMI. Solution manages HDCP, EDID, and CEC data...

Read More »
Advantech Receives Class 1, Division 2 Certification for Industrial Ethernet Switches and Media Converters
Network / Ethernet Switches

Advantech Receives Class 1, Division 2 Certification for Industrial Ethernet Switches and Media Converters

(Cincinnati, Ohio - 07/30/09) - The Industrial Automation Group of Advantech announces that a wide range of their EKI family of Industrial Ethernet Switches and Media Converters have received Underwriters Laboratories (UL) Class 1, Division 2 (groups A, B, C, and D) certification for use in hazard locations. Installation of electronic devices in environments where flammable liquids, gasses and...

Read More »
Electronic Converters

Adapter connects legacy analog devices to cellular networks.

MultiConnect(TM) AW Analog-to-Wireless Converter lets manufacturers extend lives of devices with built-in analog modems that need to be deployed in M2M (machine-to-machine) applications. It emulates traditional dial-up PSTN network and uses integrated or external cellular modems to connect to packet-switched or circuit-switched data networks and allow PPP pass-through. Legacy devices are...

Read More »
Dual-Channel DAC facilitates power-supply margin testing.
Electronic Converters

Dual-Channel DAC facilitates power-supply margin testing.

Housed in 8-pin -µSOP, 7-bit I²C-controlled Model DS4432 features 2 output channels, each providing fine control of DC-DC power supply by sinking or sourcing current directly into power supply's feedback node. Full-scale output currents are set between 50-200 µA using one external resistor for each channel. Through I²C bus, output currents can then be set to any of 127 linear sink or...

Read More »
Electronic Converters

ADCs simplify power-line monitoring system design.

Suited for utility subsystem control, 8-channel AD7606 (16-bit) and AD7607 (14-bit) simultaneous-sampling ADCs achieve SNR of 90 dB and offer optional oversampling mode that helps reduce code spread and enhance anti-alias rejection. Multi-channel integration facilitates 3-phase I/V measurement and neutral monitoring, while true bipolar analog input ranges of ±5 and ±10 V allow for preservation...

Read More »
Signal Processors

Integrated Ground Referenced DACs free up PCB area.

Delivering 106 dB SNR with optimized mute and crosstalk performance, WM8523 and WM8524 deliver audio performance required in consumer electronics products while eliminating need for 18 external components. Charge pump architecture generates pop-free, 2 Vrms stereo output signal from single standard 3.3 V rail without separate op-amps. Both products can driving 1 kW line load and generate...

Read More »
DACs suit industrial control and automation applications.
Electronic Converters

DACs suit industrial control and automation applications.

Offered in 3 x 3 mm package, 16-bit MAX5138 and 12-bit MAX5139 integrate voltage reference and are pin- and software-compatible. Power-down feature minimizes power consumption to 200 nA, while internal buffer optimizes load regulation and transition-glitch suppression for DAC output. Pin-programmable, zero/midscale DAC output ensures output powers up to desired state, even during loss-of-power...

Read More »
FMC Mezzanine Cards support Xilinx Virtex-6 FPGAs.
Electronic Converters

FMC Mezzanine Cards support Xilinx Virtex-6 FPGAs.

FPGA Mezzanine Card (FMC/VITA 57) modules include 3 GSps, 8-bit, dual-channel ADC512 as well as 1.5 GSps, 8-bit, 4-channel ADC513, which both support up to 1,500 MSps data throughput per channel. Products eliminate data bottlenecks by supporting bandwidths in excess of 6 B/s with direct, low-latency connections to host FPGAs, including Xilinx® Virtex®-6 FPGAs. Air- and conduction-cooled...

Read More »
Analog-to-Digital Converter is cascadable to 32 channels.
Electronic Converters

Analog-to-Digital Converter is cascadable to 32 channels.

Housed in 38-pin TSSOP package, 4-channel 24-bit MAX11040 provides compensation for phase shift caused by resistor dividers, transformers, or filters at analog inputs through programmable delay of 0-333 -µsec. Eight units can be daisy-chained to provide sampling capacity of up to 32 channels. With minimum SINAD of 90 dB and SFDR of 91 dB, ADC is suited for power-grid-protection equipment, as...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics