New IMC-C100-XX Series Industrial Media Converter Comes with Link Fault Pass Through Function
IMC-C100-XX Series Industrial Media Converter are offered in 12~48 VDC redundant power inputs with reverse polarity and overload current protection. The units features built-in Far End Fault (FEF) function and are available in Multi-Mode and Single-Mode models. The converters support DIN-Rail or wall mountable orientations and provide -10°C to 70°C operating temperature range. These are...
Read More »
New Industrial PoE+ Media Converters are Compliant to 802.3at Standards
The IMP-C100-XX Series PoE+ Media Converters are available in Multi-Mode and Single-Mode models and come with 10/100TX Ethernet port and a fixed fiber interface. The units feature built-in Link Fault Pass Through (LFP) and Far End Fault (FEF) functions with 48~55VDC redundant power inputs. The converters provide extended operating temperature (EOT) from -40°C to 80°C. The units are offered with...
Read More »
New ADC/DAC Modules Offer Signal Processing Bandwidth at over 20 TeraMACs of DSP Compute Performance
VadaTech ADC/DAC Modules are available in AMC587 and AMC588 models. AMC587 offers 12-bit ADC with sample rates of up to 6.4GSPS or quad inputs at 3.2 GSPS. AMC588 module provides eight transceivers channels with a frequency range of 300 MHz to 6 GHz. AMC587 is suitable for capture analysis in COMINT/SIGINT applications, whereas the AMC588 is used in SDR, BTS and antenna systems. Both modules come...
Read More »
New Software Radio Receiver Features Two A/D Acquisition IP Modules for Simplifying Data Capture and Transfer
Pentek introduces 71865 XMC, a Software Radio Receiver with 200 MHz 16-bit A/D channelizer, 762 narrowband digital down converters and four wideband DDCs. The acquisition IP module includes a powerful controller for data clocking, triggering and synchronization functions. The four wideband DDCs set decimation values within 8 to 128 and provides output bandwidths from 1.25 MHz to 20 MHz. This...
Read More »
Rack System Design & Buyer's Guide
There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.
Read More »
Gaming Innovation Group use Perle Media Converters in new iGaming Cloud Data Center in Malta
10G Media Converters bridge connectivity between Fiber and 10GbE Copper NASHVILLE, TN—May 30th, 2018 — Online gaming operators are in fierce competition to dominate in a market that is forecast to hit $59.79 billion dollars by 2020.* Often, they will seek out solutions like Gaming Innovation Groups ‘iGaming Cloud’ (iGC) to eliminate technological bottlenecks and significantly reduce costs...
Read More »
New AD5758 Digital-to-Analog Converter Comes with Dynamic Power Control
AD5758 Digital-to-Analog Converter is suitable for applications in factory automation, process automation, and motor control. Unit is offered in 5 mm x 5 mm footprint and features output fault protection circuits and built-in miswire protection. The DAC offers 0.05% TUE and come with advanced integrated diagnostic features.
Read More »
Mencom's Media Converters support automatic speed negotiation.
Mencom offers Ethernet to Fiber and Serial to Fiber media converters that are suitable for temperature ranging from -10 to +70 °C. Ethernet to Fiber Converters are available with one or two fiber ports and provide conversion between 10/100BaseT(X) and 100Base FX. These converters come with auto MDI/MDI-X, and Link Fault Pass-Through (LFP) function and one 5 pin DIP switch. Serial to Fiber...
Read More »
NetWay™ Spectrum Converter/Injector reduces cabling requirement.
NetWay™ Spectrum Converter/Injector is used for converting single fiber cable into two 1 Gb Ethernet ports. Unit’s each port provides up to 30 W and can be powered with 56 VDC by remotely using Altronix WayPoint562, NetWay1D or NetWaySP4. Product comes with P1MM (up to 550 m) and P1SM10 (up to 10 Km) SFP modules and enables the usage of multiple IP devices at distance using fiber.
Read More »
LTC7106 Bidirectional Current DAC features internal power-on reset circuitry.
Linear™ LTC7106 Bidirectional Current Digital to Analog Converter is offered in 2 x 3 mm DFN-10 package. Unit feature an internal digital programmable slew rate (500 ns/step to 3.5 ms/step), range bit and pen-drain output. DAC is operated with input voltage ranging from 2.5 V to 5.5 V and delivers ±16 µA to ±256 µA output current. Product comes with PMBus compatible interface which converts...
Read More »
10G Media Converters feature pluggable transceiver ports.
10G Media Converters are offered in six variants and allow user to connect 10 Gigabit copper to multimode or single mode fiber. Units can accommodate fiber to fiber, copper to fiber or copper to copper media conversion. Products offer 10/100/1000/2500/10000 rate conversion which automatically detect Ethernet port speed. Converters can be configured with cut-through forwarding option.
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
