New Converters Products

A/D Converters feature software-selectable input ranges.

Addressing industrial data conversion needs, PulSARÃ-® ADCs include 16-bit AD761x series and 18-bit AD763x series. Analog input ranges are software-selectable across unipolar and bipolar input ranges. Along with error correction circuits, ADCs feature serial and parallel interfaces as well as internal registers that enable flexible switching from input voltage ranges on-the-fly, with zero...

Analog-to-Digital Converter optimizes receiver performance.

With spurious free dynamic range of 100 dBc combined with 78 dB SNR, 16-bit Model LTC2208 resolves low-level signals in presence of large interferers and blockers. Offered in speed grades up to 130 Msps, unit includes internal transparent dither circuit, which optimizes SFDR response, and digital output randomizer that minimizes unwanted tones caused by digital feedback. Unit is housed in 9 x 9...

Quad-Output DC/DC Converter has low-noise, 15 W design.

Manufactured in 2.0 x 2.0 x 0.395 in. coated metal case that provides 6-sided EMI shielding, BD16000 features 2:1 input voltage range, input-to-output isolation, and soft start capability. It also incorporates input Pi filter, short circuit protection, 380 kHz switching frequency, flyback topology, and 4 LDO linear regulators. Converter accepts 18-36 Vin and provides 3.3, 5, 12, and 5 Vout at 1...

ADC suits precision measurement applications.

Manufactured in TQFP-64 package, ADS1610 is 16-bit, 10 MSps delta-sigma analog-to-digital converter (ADC) that offers 86 dB SNR and 95 dB SFDR. Product operates from a +5 V analog supply and +3 V digital supply. Along with 86 dB SNR and 95 dB SFDR over 5 MHz bandwidth, unit features -94 dB THD and 4.4 MHz passband with under 0.0002 dB of ripple, which provides wideband signal processing. On-chip...

Understanding OSHA Citations and Staying Compliant

This white paper will individually examine the most common OSHA topics, give solutions on how to meet OSHA workplace standards, and provide a checklist to check your own company's compliance.

Tunable Downconverter IP Core boosts channel density.

Designed for Xilinx's Virtex II, Virtex II Pro, or Virtex 4 FPGAs, 256-channel Model 4954-430 handles 16-bit real or complex input data at up to 185 MHz. Channelizer stage generates 1,024 fixed adjacent frequency channels with alias-free performance greater than 75 dB across passband of each channel. Each of 256 DDCs has programmable numerically controlled oscillator to implement independent...

Analog-to-Digital Converter delivers 13-bit resolution.

Manufactured in 80-pin TQFP PowerPad(TM) package, ADS5444 incorporates high-bandwidth input buffer, linear track-and-hold stage, and internal reference. Analog-to-digital converter (ADC) operates from 5 V supply and provides LVDS-compatible digital outputs from 3.3 V supply. Specified over -40 to +85Ã-

High-Speed ADC integrates 1:4 demultiplexed outputs.

Featuring embedded 1:4 LVDS demultiplexer for direct interface with standard FPGAs, 10-bit AT84AS004TP has clock frequency of 2 GSps and SNR of 51 dB @ 2 GSps in first Nyquist conditions. Gain flatness remains flat at Ã-

Digital to Synchro Converters provide -

Measuring 2.6 x 3.1 x .60 in., Digital to Synchro Converter Modules accept 14-bit natural binary angle and convert it into 3-wire synchro or 4-wire resolver signal. Standard output voltages are 90 or 11.8 V RMS L-L, 60 or 400 Hz. Output is short circuit protected and loading of 1.5 Va is available. Digital inputs are TTL/DTL compatible, and synchro output and reference is fully transformer...

Synchro/Resolver Output Modules suit simulation applications.

Series PC104-DS offers 2 channels of Digital to Synchro and Digital to Resolver conversion in standard stack-through PC 104 footprint. Units feature 16-bit resolution, transformer isolated reference inputs, and completely short-circuit proof outputs capable of driving up to 1.2 Va load/channel. Reference inputs are 2-115 Vac at 57-3,000 Hz, and external output transformers are available for...

Digital to Synchro Converters are standard bus compatible.

Offering output power of 1.5, 2, or 5 Va, STB/DSC Series consists of single-slot STD Bus converters that will accept up to 16-bit natural binary information and convert it to 11.8 or 90 V synchro or resolver information from 50 Hz to 5 KHz. Data is addressable in 2 byte format over STD backplane. Outputs are short circuit proof and current limited. Only 60 Hz units require external transformer....

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.