Optical Media Converter offers scalable 20 Gbps bandwidth.
Suited for InfiniBand, Gigabit Ethernet, and Fiber Channel applications, QTR 3500 SmartLink(TM) Double Data Rate (DDR) copper-to-fiber media converter lets IT managers extend data link distances to 150 m using MTP/MPO optical cable. Bandwidth is transmitted with 4 full-duplex transmit and receive channels that are transparent to user, and electrical interface mates directly into MDI electrical...
Read More »
ADC targets dual-channel applications.
Available with commercial and military temperature range options, dual-channel 14-bit DATEL ADSD-1402S delivers 2 MS/sec sampling rate. SMT 40-pin TDIP package incorporates out-of-range indicator and all timing and control logic necessary to operate from single edge-triggered start convert pulse. Characteristics include low noise of 250 Ã-µV rms, 79 dB SNR, -80 dB THD, and 12 MHz input...
Read More »Analog-to-Digital Converter has clock frequency of 500 Msps.
Monolithic Model AT84AS001TP enables system designers to digitize signals with frequencies up to 250 MHz at 12-bit resolution. With 0.5 dB band flatness from DC-250 MHz, unit provides 62 dBc SNR, 75 dBc SFDR, and 10 ENOB at 500 Msps over first Nyquist zone with 2-tone inter-modulation distortion limited to -70 dB. Required analog input signal amplitude is 1.1 Vpp, and can be ac or dc coupled....
Read More »PoE Media Converters eliminate 100 m distance limitation.
Copper-to-Fiber Media Converters enable users to power wireless access points or VoIP phones that are located more than 100 m from main PoE Power Sourcing Equipment. Both are fully compliant IEEE 802.3af units providing 10/100Base-TX to 100Base-FX conversion and can be powered by AC outlet. Converters combine data received over fiber optic link with up to 15.4 W of power and insert combination on...
Read More »
TOP 3 SEAL TROUBLE SIGNS and HOW TO FIX IT
If ignored, broken seals can lead to a loss in production and equipment shut down. For more information on seals and seal repairs, download now.
Read More »Media Converters suit limited space applications.
Designed to integrate fiber optic cabling into 10/100 UTP environments, Mini 10/100 Converters are offered in models that support either multimode or single mode fiber, as well as ST or SC fiber interface connectors. They feature Auto-negotiation, AutoCross, and Auto Link Restoration. Units are powered by ac power adapter, with USB port or 802.3af Power-over-Ethernet enabled RJ-45 port as...
Read More »Wireless Extender uses standard telephone outlets.
Tornado 251 WirePlus(TM) enables consumers to extend wireless signal of 802.11 wireless access point by using regular copper wires. It converts wireless signal and passes it through existing phone wires from outlet near access point to one or more remote outlets. Signal uses frequency range different than ADSL and voice, so it will not affect quality of other services on same line. There is no...
Read More »Converters connect fiber optic link terminals to controller.
Connected respectively via DB-15 and RJ-45 connector, Models 4127 and 4129 convert RS-485/RS-422 serial communication interface to HP Versatile Link plastic core cable and provide full galvanic isolation between connected devices. They allow electrostatic or electromagnetic interference-free data transfer of optical fibers to be utilized by devices with RS-485/RS-422 interface, enabling data...
Read More »
Analog-to-Digital Converter enables wideband sampling.
Offering 1.2 GHz analog input bandwidth, 12-bit, 250 Msps Model LTC2242-12 operates on 2.5 V supply and consumes just 740 mW. It can be driven with analog input range of 2 Vp-p to enable SNR performance of 65.1 dB at 240 MHz input frequency, with SFDR of 74 dB. Housed in 64-pin, 9 x 9 mm QFN package, converter provides flexibility to select between LVDS, full-rate CMOS, or demultiplexed CMOS...
Read More »Media Converter suits copper or optical signal transmission.
Usable for internal and external connections, 4-channel Model FPD-010R008-0E extends optical bandwidth transport of 12.5 Gigabit/sec to max distance of 300 m when used with media detect circuit. Device features full-duplex Multipath Optical ribbon cable assemblies using 50/125 Ã-µm cable rated at 500 MHz/km. It offers symbol rates up to 3.125 Gbps/channel at 100 m and 2.5 Gbps/channel at 300...
Read More »Interface Converter handles 2-way RS232/RS485 conversion.
Bi-directional Model 4010 enables communication between devices with RS232 and RS485 interfaces. It handles RS232 to RS485 as well as RS485 to RS232 data signal conversion. All signals of both types of interfaces are regenerated, maintaining accurate adherence to interface specifications. Wall mount power supply is included. In front panel, 2 LEDs display transmit data signal activity for each...
Read More »
Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »
