Access Management System features 7 in. LCD touchscreen.
Controls and Controllers

Access Management System features 7 in. LCD touchscreen.

Based on 1.6 GHz Intel® Atom N270 processor and MiFare RFID card reader, Access Management System enables users to log and control traffic in and out of content sensitive workplaces. System includes 2 DI/DO ports, dual Gigabit LAN ports, and 1.3 Megapixel Web camera, as well as digital microphone and IR motion detector. Bundled Access Management Software offers custom features such as...

Read More »
Automation Systems

Honeywell to Automate the Largest Green Diesel Plant in the United States

Fully Integrated System from Process to Building Controls Will Help Produce 18-Million Gallons of Green Diesel Annually from Wood Waste and Forest Residue PHOENIX, Oct. 26, 2009 - Honeywell (NYSE:HON) today announced that Flambeau River Biofuels (FRB) has selected it to supply and integrate all automation equipment for the largest second-generation "green diesel" plant in the United States. The...

Read More »
Controls and Controllers

Remote Power Switch PDU enables remote reboot.

Featuring LAN connection, Remote Power Switch enables user to switch on, switch off, and reboot equipment as well as keep tabs on power consumption via web interface. SNMP compatibility lets switch send traps directly to SNMP manager. Users may choose to receive notifications when relay is latched, or if unit is reset for any reason. If power to large number of devices needs to be controlled at...

Read More »
USB to I2C Dongle has no software driver requirements.
Electronic Adapters

USB to I2C Dongle has no software driver requirements.

Enabling users to connect I2C devices via USB port, IOW24-DG operates at 100 kHz and allows of up to 750 bytes/sec throughput. Handshaking via clock stretching is supported, along with programmable time-out function, to prevent dongle from hanging up due to malfunctioning slave devices. Comprised of assembled PCB, 4-wire cable, and 2-part snap-fit dongle case, product is sized to not block...

Read More »
Actuators and Belt Drives offer linear motion.
Motor Controllers and Drives

Actuators and Belt Drives offer linear motion.

Available in travel lengths from 184-2,242 mm, MacSTANDARD Actuators provide max speeds of 1,270-15,240 mm/sec and load capacities from 25-500 lb, while Belt Drives provide 100-2,500 lb of force. Customers can configure products through options such as single or double shaft types, preferred drive shaft location, and addition of position sensors. Actuators and drives are suited for industrial...

Read More »
Controls and Controllers

Microcontrollers extend battery life by factor of 4.

Based on ARM® Cortex(TM)-M3 architecture, 32-bit EFM32 Gecko Microcontrollers consume less than 180 Â-µA/MHz while executing real life code from Flash. Units include 900 nA LCD controller, 8-channel 12-bit 1 Msamples/sec ADC running at less than 200 µA, 100 nA brown-out detector, 32 kHz real-time counter running at 50 nA, and UART capable of 9,600 bps at 100 nA. Offered in 22...

Read More »
MCUs (8-Bit) conserve power in portable device batteries.
Controls and Controllers

MCUs (8-Bit) conserve power in portable device batteries.

Comprised of 26 devices in 3 lines, STM8L series delivers scalable performance and features with less than 400 nA static power and 150 Â-µA/MHz dynamic current. Each is built on 130 nm process and offers full CPU performance up to max operating frequency throughout 1.65-3.6 V supply voltage (Vdd) range. Use of on-chip regulator makes power consumption independent of Vdd, and multiple power...

Read More »
Controls and Controllers

System IP Products aid low-power, media-rich SoC designs.

Balancing low latency with guaranteed bandwidth, AMBA® Network Interconnect (NIC-301) with QoS delivers rich media experience from ARM Cortex(TM) CPUs, Mali(TM) GPUs, and Video processors. AMBA Dynamic Memory Controller (DMC-342) supports LPDDR2 memories and manages memory power modes to reduce system level power consumption. AMBA Verification and Performance Exploration (VPE-301) tool...

Read More »
Intelligent Gearbox Monitoring System Allows Corus Engineers to Make Key Design Modifications to Reduce Costly Downtime
Motion Monitors

Intelligent Gearbox Monitoring System Allows Corus Engineers to Make Key Design Modifications to Reduce Costly Downtime

The unique PRAXIS condition monitoring partnership between CNES and Schaeffler UK has enabled plant engineers at the beam mill in Lackenby, Teesside to oversee an internal redesign to the hot saws gearbox, which has ultimately saved the company more than Â-£100,000. In 2006, an FAG DTECT X1 online remote monitoring device was installed on the hot saws to determine the condition of the saws....

Read More »
Sensors / Detectors / Transducers

RAE Systems to Feature Personnel Safety Products at National Safety Council's Annual Congress & Exposition

Featured Products Targeted to OSHA Compliance and Confined Space Entry Markets SAN JOSE, CA, October 20, 2009 -- RAE Systems Inc. (NYSE AMEX: RAE), a leader in delivering innovative sensor solutions to serve energy, hazardous material management, industrial safety, government safety and environmental markets worldwide, will exhibit at the National Safety Council's National Safety Congress (NSC) &...

Read More »

All Topics