New mmWave Antenna Modules Can be Paired with Snapdragon X50 5G Modem
Antennas

New mmWave Antenna Modules Can be Paired with Snapdragon X50 5G Modem

Qualcomm’s mmWave Antenna Modules consist of 5G NR millimeter wave (QTM052) and sub-6 GHz RF (QPM56xx) models. The units are designed for smartphones and mobile devices. QTM052 supports up to 800 MHz of bandwidth in the 26.5-29.5 GHz, 27.5-28.35 GHz and 37-40 GHz mmWave bands. QPM56xx family consists of QPM5650, QPM5651, QDM5650, and QDM5652 models. The sub-6 GHz RF modules provide integrated...

Read More »
Latest BMS Monitoring System Offers Communication Over BACnet and Modbus Protocols
Software

Latest BMS Monitoring System Offers Communication Over BACnet and Modbus Protocols

The Modine Building Management System (BMS) Monitoring System provides control of the heating units in the building using customer’s BMS interface. BMS board can control three outputs (blower, stage 1 valve, stage 2 valve). BMS allows units to be switched between summer/winter operations, turn the unit on/off or change the heating/fan-only set point and set point band. BMS communication board...

Read More »
New Kvaser Hybrid Pro 2xCAN/LIN Interface Can Send up to 20000 Messages per Second
Interfaces

New Kvaser Hybrid Pro 2xCAN/LIN Interface Can Send up to 20000 Messages per Second

Kvaser Hybrid Pro 2xCAN/LIN Dual-Channel Interface enables engineers to configure channel as CAN, CAN FD or LIN. Unit comes with silent mode, single shot, error frame generation and MagiSync automatic clock synchronization features. The interface supports up to 1Mbit/s, 5 Mbit/s and 20 kbit/s for High Speed CAN, CAN FD and LIN 2.2A respectively. Unit sends messages with time-stamped to 1 µs...

Read More »
Dortronics Custom Fabricated Door Control Solutions Save the Day... Again
Controls and Controllers

Dortronics Custom Fabricated Door Control Solutions Save the Day... Again

 Affordable Custom Configurations, Colors and Engraving with Fast Turnaround Time Sag Harbor, NY (July 17, 2018) – When an end-user or installer needs a custom fabricated access or door control solution, they call Dortronics Systems, Inc. With all product and design done on site at their Sag Harbor, NY headquarters, Dortronics has carved a unique niche for themselves in the access and door...

Read More »
New Gigabit Ethernet XMC Modules are Designed for COTS Applications
Interfaces

New Gigabit Ethernet XMC Modules are Designed for COTS Applications

Acromag’s XMC Modules consist of XMC611, XMC612 and XMC613 models. XMC611 provides four RJ45 connectors on the front panel for copper cabling, XMC613 routes four 1000BASE-T connections to the P16 connector whereas the XMC612 feature four SFP connectors that support fiber optic media. Modules are suitable for use in defense, aerospace, industrial, and scientific research computing systems. Units...

Read More »
TeraNova Selects MultiTech's Dragonfly Cellular Module to Improve Communications for Pursuant Health's Web, Mobile and Health Kiosks
Modules

TeraNova Selects MultiTech's Dragonfly Cellular Module to Improve Communications for Pursuant Health's Web, Mobile and Health Kiosks

Integrated Solution with Webbing, a Mobile Virtual Network Operator (MVNO) Provides a Better and More Cost-Efficient IoT Solution MOUNDS VIEW, MINN. (PRWEB) JULY 10, 2018 - Multi-Tech Systems, Inc., a leading global manufacturer of M2M and IoT communication devices, today announced that its MultiTech MultiConnect® Dragonfly™, award-winning embedded cellular SoM's, was selected by...

Read More »
New RRS-3 ADVAC Remote Racking System Provides Mechanical and Electrical Safety Protection
Controls and Controllers

New RRS-3 ADVAC Remote Racking System Provides Mechanical and Electrical Safety Protection

RRS-3 ADVAC Remote Racking System is designed for ABB ADVAC vacuum circuit breakers with closing door application that features interlock pushbutton. The system allows technicians to install and remove the circuit breakers remotely from a distance of up to 300 ft. Unit is offered with optional 25-foot extension cables, 24 V DC LED light, wireless video camera system and rugged protective...

Read More »
Amacoil Offers Latest Uhing Rolling Ring Linear Drives with New Control Option that Permits Precise Location of End Stops
Motor Controllers and Drives

Amacoil Offers Latest Uhing Rolling Ring Linear Drives with New Control Option that Permits Precise Location of End Stops

Uhing Rolling Ring Model RG Linear Drives are available in axial thrusts ranging from 7 to 800 lb. Units feature a control knob that is mounted on end of each rod. The rotation of the knob enables the end stops to move in fine increments. Unit’s remote control knob allows the operator to position the end stops while the drive is in operation. Uhing drives are suitable for use in winding...

Read More »
Automated Feedmill Control System
Controls and Controllers

Automated Feedmill Control System

Sterling, IL June 2018: Sterling Systems & Controls, Inc. custom designs and manufactures the highest quality automation control systems for virtually any process or a complete facility. Sterling Systems & Controls has designed and provided equipment and software for a customized Automated Feedmill Control System using an Allen-Bradley PLC and desktop PC’s running Sterling Systems’ customized...

Read More »
New IA-2660-Ui Digital I/O Module is Embedded with Software that Allows the Retrieval of Input State
Modules

New IA-2660-Ui Digital I/O Module is Embedded with Software that Allows the Retrieval of Input State

IA-2660-Ui USB Controlled Digital I/O Module consists of 96 channels arranged in 12 groups of 8 digital I/O each. The module’s three control options for channel output state are 96 channel command, group command and single command. Unit is designed to CE, FCC and ROHS standards and can be DIN rail mounted or wall mounted. The internal power supply of USB controlled device can be set to 3.3 V or...

Read More »

All Topics