Motion Controllers enhance MicroLogix 1762 functionality.
Controls and Controllers

Motion Controllers enhance MicroLogix 1762 functionality.

Able to plug directly into MicroLogix 1100/1200/1400 PLC, 3100 series X-Y axis motion control modules provide encoder feedback in addition to range of motion commands to satisfy simple to sophisticated application requirements. Both 3102 and 3102i are programmable using RSLogix 500 software. Linear and Circular interpolation, exclusive to 3102i module, enable sophisticated motion control. Model...

Read More »
Electrical Regulators

DC/DC Regulator IC has EMC-compliant design.

As complete 1 A DC/DC regulator system-in-a-package, LTM8031 includes inductor, switching DC/DC controller, power switches, filters, and all support components in 9 x 15 x 2.82 mm plastic LGA package. DC/DC uModule®, compliant with radiated emissions requirements of EN55022 class B, has switching frequency adjustable from 200 kHz to 2.4 MHz via resistor or synchronized to external clock....

Read More »
LDOs offer wide input and output voltage ranges.
Electrical Regulators

LDOs offer wide input and output voltage ranges.

Featuring 28 V input, MCP1804 Low Dropout Regulators (LDOs) deliver up to 150 mA output current and support output voltages from 1.8-18 V. Input and output are stable, with 0.1 Â-µF of capacitance, and operate on typ quiescent current of 50 µA. Shutdown function allows output to be disabled, dropping quiescent current to 0.01 µA. Available in SOT-23, SOT-89, and SOT-223...

Read More »
Motor Controllers and Drives

Diesel Hybrid Electric Powertrain provides all-wheel drive.

Configurable for specialized military and commercial applications, 4-wheel Q-Force features SCADA system, hybrid control system that minimizes battery size through optimized charge controls and regenerative braking, and advanced traction motor/transmission system. In one configuration, diesel engine produces 75 hp, while electric motor provides 133 hp, and power train yields 5,463 lb-ft of torque...

Read More »
Conferencing Equipment

VoIP Interface supports audio conferencing systems.

Providing direct connection between Converge Pro audio conferencing systems and VoIP PBX phone systems, Converge® Pro VH20 enables users to transport audio signals across IP networks. VH20 links with any of ClearOne's Converge Pro products to create complete audio conferencing system that can be integrated with Cisco, Avaya, and many other VoIP PBX phone systems for 100% interoperability....

Read More »
Controls and Controllers

Microcontroller targets AC motor applications.

Suited for washing machines, refrigerators, and air conditioners, 32-bit Model TMPM370 combines 80 MHz ARM® Cortex(TM)-M3 processing core with hardware vector engine, providing enough computation capability to drive 2 independent motors. MCU cuts CPU load in half by offloading most heavy calculations to vector engine. In addition to 256 KB on-chip Flash and 10 KB SRAM, device includes dual...

Read More »
Motion Controller handles complex tasks for up to 30 axes.
Controls and Controllers

Motion Controller handles complex tasks for up to 30 axes.

Integrating with CJ-Series PLCs, Trajexia CJ1W-MCH72 Module can operate up to 14 tasks simultaneously and control up to 30 axes over MECHATROLINK-II Motion bus with independent position, speed, or torque control for every axis. Each axis can run complex interpolated moves, e-cams, and e-gearboxes. Module includes digital I/Os, MECHATROLINK-II master connection, and serial port for external...

Read More »
Power MOSFETs feature dimensions of 1 x 1 x 0.548 mm.
Modules

Power MOSFETs feature dimensions of 1 x 1 x 0.548 mm.

Model Si8461DB MICRO FOOT® power MOSFETs offer on-resistance of 0.1 W at 4.5 V gate drive and are specified for maximum on-resistance values at 2.5, 1.8, and 1.5 V. Suitable for applications requiring higher input voltages, Si8465DB has gate-to-source voltage of 12 V with on-resistance of 0.104 W at 4.5 V and 0.148 W at 2.5 V gate drive. Both 20 V p-channel devices are designed for load...

Read More »
ATI Industrial Automation's Force/Torque Sensor System Provides Plug-and-Play Connectivity to Stäubli Robots
Controls and Controllers

ATI Industrial Automation's Force/Torque Sensor System Provides Plug-and-Play Connectivity to Stäubli Robots

ATI Industrial Automation's Networkable Force/Torque Sensor System (Net F/T) is now fully compatible with Staubli Robots. The coordinated effort between ATI, Apex, N.C. and Staubli Robotics, Duncan, S.C. provides true plug-and-play connectivity via Ethernet to Staubli's CS8 robot controllers. The Net F/T transducer with Net Box interfaces to a Staubli robot controller via a TCP/IP socket and...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics