Dual-Channel Modem connects Ethernet devices over coax or UTP.
Electronic Adapters

Dual-Channel Modem connects Ethernet devices over coax or UTP.

Featuring 2 standard BNC connectors, 2 terminal blocks, and 2 standard RJ-45 Ethernet connectors, Model CNFE2CL2MC allows Ethernet-based equipment to be connected over 75 W coaxial cable or unshielded twisted pair telephone wire. Unit can extend distances between devices to as much as 500 m on coaxial cable or up to 3,000 m on UTP. Featuring environmentally hardened design, modem operates in...

Read More »
CNC Control is built on real time Linux-based kernel.
Controls and Controllers

CNC Control is built on real time Linux-based kernel.

Model 8200 CNC Control works with all G/M Code programs and delivers capabilities critical for high-speed and multi-axis machining: macro programming, auto routines, trig help, and conversational programming. Mill Away function, for mid-program offset adjustment, as well as wire frame and solid model graphic modes, further enhance operation. Along with USB and Ethernet networking capabilities,...

Read More »
Circuits

PCIe Controller Chips support serial, parallel, and GPIO.

Consisting of 4 devices, MCS99XX Series enables variety of PCI Express® to multiple I/O connectivity options. Serial ports are compatible with RS232, RS422, and RS485 standards and support throughput from 50 bps to 16 Mbps, while parallel port is compatible with IEEE 1284 and supports Nibble, Byte, SPP, ECP, and EPP modes. All 8 GPIO pins are programmable and can be used as input or output....

Read More »
Gages

Wireless Gauge Interface offers plug and play operation.

Without requiring any tools, i-Wave allows plug-and-play changeover of mechanical gauge heads. StarLock locking device allows connection of new/existing gauges to wireless gauging. Able to work in severe shop floor conditions, wireless handle accommodates any mechanical gauge head featuring standard M10, M6, or M3,5 thread. Unit is protected against coolants and dust, and alkaline C batteries...

Read More »
Power Modules eliminate complex layout placement challenges.
Modules

Power Modules eliminate complex layout placement challenges.

SIMPLE SWITCHER® LMZ10503/4/5EXT, LMZ12001/2/3EXT and LMZ14201/2/3EXT modules combine efficiency of synchronous switching regulator with simplicity of linear regulator. Vibration and drop tested to military and industrial standards, modules have operating range of -55 to +125°C suited for POL conversion applications in harsh environments. Supported max load currents, depending on...

Read More »
Hold-Up Module is for systems with input current up to 10 A.
Modules

Hold-Up Module is for systems with input current up to 10 A.

Model MTH100 hold-up module is designed for maintaining short-term power to critical avionic and vetronic systems during power dropouts. Designed for use in systems with input current up to 10 A, unit accommodates input range of +10-40 Vdc and charges capacitors to voltage typically from +36 or +45 Vdc. Charger output voltage is programmable, allowing module to work with military and industrial...

Read More »
Modules

Low-Profile Splitter Module separates POTS, DSL signals.

SmartER(TM) B8887NL central office (CO) splitter module enables dense mounting of multi-channel splitter cards, resulting in more modules per digital subscriber line access multiplexer (DSLAM) or roadside cabinet. Featuring 8 mm profile that increases airflow area between multi-channel splitter cards, module separates plain old telephone service (POTS) and DSL data signals. It complies with...

Read More »
Programmable Buck Regulators support EnergyStar® applications.
Controls and Controllers

Programmable Buck Regulators support EnergyStar® applications.

Series SMB20X DC-DC buck regulators are single or dual output step-down converters with high-side MOSFET supplying up to 4 A output current. Serial digital interface and non-volatile memory facilitate configuration and programming. Input voltage range is +4.5-16 V and output range is +0.8-5.0 V, accurate to 2.5% over load/line/temperature, while output voltage is programmable in 100 mV or ~10 mV...

Read More »
USB Microcontrollers reduce system size.
Controls and Controllers

USB Microcontrollers reduce system size.

Comprised of 4 models as small as 64 pins, PIC24FJ256GB210 series integrates USB for Embedded Host/Peripheral/OTG and 96 KB RAM. In combination with USB software library and TCP/IP stack, MCUs reduce system footprints in various applications. Peripheral Pin Select lets designers remap DIO pins, and additional peripherals include 24 channels of mTouch(TM) capacitive touch sensing, touch software...

Read More »
I/O Link System connects RFID system to network. .
Data Links

I/O Link System connects RFID system to network. .

With IO-Link, users can connect complex devices, such as RFID processors, to industrial network via gateway using standard discrete wiring. Solution can replace I/O enclosure, 4 shielded cordsets, and 4-port RS232 PLC module with single IO-Link Expansion Module and four 3-conductor, non-shielded cordsets. Additional I/O points are made available by Expansion Module that can be used for analog...

Read More »

All Topics