SFP Optical Module Controller has dual-receiver interface.
Controls and Controllers

SFP Optical Module Controller has dual-receiver interface.

Model DS1877 controls and monitors all receiver functions for SFP and SFP+ optical modules, with full support for SFF-8472 specification. It monitors 4 analog channels, including temperature, VCC, and 2 external differential signals, and loss of signal is continuously monitored in both receiver channels. Contained in 5 x 5 mm, 28-pin TQFN package, SPF video controller is specified over -40 to...

Read More »
Cabinet Cooling Control minimizes compressed air use.
Controls and Controllers

Cabinet Cooling Control minimizes compressed air use.

CE-compliant digital ETC(TM) (Electronic Temperature Control) Cabinet Cooler® System keeps electrical enclosures cool while minimizing compressed air use. By maintaining constant temperature in electrical enclosure slightly under max rating of electronics, control permits just enough cooling for electronics without going so cold as to waste compressed air. Models for 120 or 240 Vac are...

Read More »
Vacuum Pump System Controller features touchscreen operation.
Controls and Controllers

Vacuum Pump System Controller features touchscreen operation.

Utilizing DeviceNet distributed I/O network, VacTrac(TM) Series 24/128 can control up to 24 vacuum conveying pumps, 128 loading stations, and 128 purge valves. Unit is based on Allen-Bradley CompactLogix controller with 10 in. color touchscreen operator interface. With manifold sharing capabilities, Series 24/128 can sequence 6 vacuum pumps per manifold line and assign each loading station to any...

Read More »
Electrical Regulators

Low Drop-Out Regulators suit space-constrained applications.

Consuming 32 Â-µA per channel when enabled, 150 mA triple-output Models MIC5387/85 offer voltage range options down to 1.0 V and provide up to 70 dB of PSRR for noise sensitive applications. Units operate from -40 to 125°C and offer full protection circuitry including current limit and thermal shutdown protection. Housed in 1.6 x 1.6 mm/2 x 2 mm Thin MLF® packages, respectively,...

Read More »
Electrical Regulators

Boost Switching Regulator targets HDTV tuner applications.

With max output voltage of 35 V and switch current of more than 350 mA, Model MIC2619 can power most high-voltage bias applications, such as TV tuners. Unit implements constant frequency 1.2 MHz PWM current-mode control scheme and includes programmable overvoltage protection in case of fault condition. Housed in Thin SOT-23 6-pin package, IC has operating junction temperature of -40 to...

Read More »
Controls and Controllers

Programmable Controller IC provides intelligent motion sensing.

Housed in 3 x 3 x 1 mm package, 14-bit Xtrinsic MMA9550L extends 3-axis accelerometer functionality with programmable core and on-chip memory to enable advanced motion sensing. Unit manages multiple sensor inputs and can perform intelligent, system level decisions within application. Up to 12 inputs are consolidated by sensing hub of unit, which operates with slave port configurable as IIC or...

Read More »
Low-Power MCU adds authentication to any application.
Controls and Controllers

Low-Power MCU adds authentication to any application.

Supplied in 16-pin TQFN package, MAXQ1004 integrates random-number generator and AES encryption engine supporting 128-, 192-, and 256-bit key sizes. These features enable secure authentication and communication schemes while resisting analytical and cryptanalysis attacks. Along with 16 KB integrated flash memory and communication options such as SPI(TM) and 1-Wire® interfaces, MCU offers...

Read More »
Controls and Controllers

Hot Swap Controller protects low power boards.

Integrating power MOSFET and sense resistor, 5 A Model LTC4219 protects boards with load supply voltages from 2.9-15 V, allowing boards to be safely inserted and removed from live backplane. During start-up, inrush currents are controlled by limiting gate ramp rate to 0.3 V/ms. Load current is monitored using voltage sensed across internal 7.5 mW sense resistor and adjusting internal 33 mW MOSFET...

Read More »
Power Supplies

DC/DC uModule Regulator delivers 15 A from inputs down to 1.5 V.

In 15 x 15 x 4.32 mm LGA package, LTM4611 integrates main DC/DC power circuit and gate drive circuit plus inductors, MOSFETs, input and output bypass capacitors, and compensation circuitry. Switch mode DC/DC uModule® point-of-load (POL) regulator can generate its own 5 V N-channel MOSFET gate drive for voltage conversion from 3.3 VIN or less to loads as low as 0.8 V at up to 15 A....

Read More »
Controls and Controllers

CNC Control supports 5-axis tool grinders.

Suited for OEMs and retrofit CNC control applications, Series 8 CNC integrates probing, grinding, and wheel dressing features into operator interface. Control supports MTS Tool Kit software, which provides integrated CAD/CAM solution for variety of tools and allows 3D modeling and simulation of tool grinding process. Additional features include data collection, machine network connectivity, and...

Read More »

All Topics