Torque Motor Power Controller works with 3-phase AC motors.
Controls and Controllers

Torque Motor Power Controller works with 3-phase AC motors.

Able to control power supply without losing torque output, TMP-1 allows complete control between controller and motor. It also offers 3 methods for setting torque and provides option to change torque between 2 levels by switching between internal potentiometer and external potentiometer/voltage. Other standard features include alarm output function, instantaneous bidirectional operation by CW/CCW...

Read More »
Wireless Serial Printer Adapter uses Bluetooth(TM) technology.
Electronic Adapters

Wireless Serial Printer Adapter uses Bluetooth(TM) technology.

Suited to POS applications where printer can be up to 100 m away, 34 x 36 x 13 mm LM048SPA is designed to replace standard RS232 serial cables connected to printers. Bluetooth Class 1 RS232 adapter includes out-of-paper warning, and firmware ensures authentic signal response with smooth dataflow. Supporting serial baud rates from 4.8-230.4 Kbps, adapter is factory-preset for communication at...

Read More »
Controls and Controllers

Directly Monitor Safety Speeds and Stop Conditions with AS-Interface®

Minneapolis, Minn.-May 21, 2010 - TURCK introduces a new AS-interface® (AS-i) speed monitor that monitors safety speeds and stop conditions on up to two axes. The speed monitor, manufactured by Bihl+Wiedemann, is part of the large range of AS-i safety products distributed by TURCK in the United States. The speed monitor may be efficiently programmed using a configuration push-button or by...

Read More »
CAN-Bus PCI-104 Module features 2,500 Vdc isolation protection.
Electronic Boards

CAN-Bus PCI-104 Module features 2,500 Vdc isolation protection.

Supplied with standard PCI-104 interface, 2-port, 16 MHz Model PCM-3680I connects control units and transmissions in automation applications. CAN enables real-time data transmission and error detection, and when errors accidentally occur, CAN network will automatically repeat transmissions. Operating from -40 to 85°C, module includes LEDs that indicate transmit/receive status on each port,...

Read More »
Controls and Controllers

Hot Swap Controller monitors board-level operations via I2C.

Supplied in 24-pin, 4 x 5 mm QFN package, LTC®4280 operates from 2.9-15 V and has onboard 8-bit ADC and IÂ-²C compatible interface. Integrated digital power monitoring enables platform management in high-availability systems, measuring of card voltages and currents, as well as recording past and present fault conditions. Along with 26 mV current limit, IC features adjustable circuit...

Read More »
CNC Honing System profile-hones diesel cylinder liners.
Honing Equipment

CNC Honing System profile-hones diesel cylinder liners.

Featuring 20 hp vertical spindle with max stroke length of 60 in., max stroke rate of 90 fpm, and 0-300 rpm speed, SV-500 Series creates whole-bore, constant crosshatch, and custom profiled or tapered bores up to 12 in. dia, or larger. Servo-stroking system enables honing of complex parts, such as those with interrupted, tandem, blind, or geometrically flawed bores. Electromechanical design...

Read More »
Irsching 5 Combined Cycle Power Plant Near Ingolstadt Sets New Standards
Controls and Controllers

Irsching 5 Combined Cycle Power Plant Near Ingolstadt Sets New Standards

Siemens built the plant as a turn-key project On May 17, 2010, after around two years of construction, the Irsching 5 combined cycle power plant near Ingolstadt was put into operation in an official ceremony. The owner of the new plant is GKI (Gemeinschaftskraftwerke Irsching GmbH), a project company consisting of E.ON Kraftwerke GmbH, N-ERGIE AG, Mainova AG and HEAG Südhessische Energie AG....

Read More »
Controls and Controllers

Siemens to Supply Power Island Equipment to California

Siemens Energy has received an order to supply the power island for the repowering of El Centro Generating Station Unit 3 in California. ARB, Inc., a multinational construction company, will be the EPC contractor for the facility. Operator and owner of the power plant is Imperial Irrigation District (IID), California's third largest public power provider. Construction will begin on the project in...

Read More »
ABB Announces New Generation of Controller and Indicator Instruments
Controls and Controllers

ABB Announces New Generation of Controller and Indicator Instruments

Elevates process monitoring and control to a higher level Houston, TX - ABB introduces its latest generation of process controller and indicator instrumentation. Called ControlMaster, the new line-up includes four models that are highly intuitive and powerful, as well as easy to operate. A comprehensive portfolio of capabilities makes these units suitable for a wide spectrum of industries....

Read More »
Digital Amplifier Module controls brushless DC motor speed.
Motor Controllers and Drives

Digital Amplifier Module controls brushless DC motor speed.

Designed for controlling brushless DC motors with Hall sensors up to 250 W, DEC module 50/5 controller features operating voltage of up to 50 Vdc and output current of 5 A in continuous operation. Amplifier offers large number of I/O, including enable, speed ranges, speed monitor, direction of rotation presetting, current limiting, and operating status. Measuring 3 x 4 cm, OEM module integrates...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics