Veeco's NPFLEX 3D Metrology System Rapid, Three-Dimensional Surface Characterization for Large Samples
Profilers

Veeco's NPFLEX 3D Metrology System Rapid, Three-Dimensional Surface Characterization for Large Samples

In booth# E-5439, Veeco Instruments Inc. (Nasdaq: VECO), a leader in scientific and industrial metrology, will display its NPFLEX(TM) 3D Metrology System for characterizing surfaces previously too difficult to measure due to size or part orientation. The NPFLEX 3D surface profiler combines the industry-leading performance of Veeco's non-contact, white light optical profilers with a unique...

Read More »
Low-Current Electronic Drive offers on-screen programming.
Motor Controllers and Drives

Low-Current Electronic Drive offers on-screen programming.

RoHS-compliant PCM4806 IDEA(TM) linear actuator drive is optimized to regulate low current power stage suitable for controlling smaller Haydon can-stack linear actuators. In addition to providing on-screen buttons for programming, GUI offers automatic population of motor and drive parameters based on entered Haydon actuator part number. Inputs are rated for 5-24 Vdc, 4 mA max per input, and...

Read More »
Differential Level Controller also measures flow.
Controls and Controllers

Differential Level Controller also measures flow.

Intended for use in treatment plant headworks, DLT 2.0 can measure differential level at barscreen as well as open channel flow through flume. It works with 2 non-contacting ultrasonic sensors: one installed upstream from barscreen, and another installed downstream for differential level control. It is also possible to install second sensor in flume to also measure flow. Along with backlit LCD,...

Read More »
Fluorescent Ballast Control is compliant with DALI.
Controls and Controllers

Fluorescent Ballast Control is compliant with DALI.

Designed to fit in DIN rail enclosure, DIN-DALI-2 supports 2 DALI (Digital Addressable Lighting Interface) channels and enables control of up to 128 individual DALI ballasts. It fosters direct, 2-way network connectivity between Crestron control system and DALI-compliant ballast. While single-wire connectivity facilitates installation, PoE promotes flexibility and connectivity. Along with DALI...

Read More »
AS-Interface I/O Modules integrate diagnostic features.
Modules

AS-Interface I/O Modules integrate diagnostic features.

KE-style enclosure-mount modules feature 4 inputs, 4 outputs, and 22.5 mm wide housing. If output wire becomes disconnected, switchable lead breakage detection automatically sends peripheral fault signal to upper level controller. Any input pulse or noise spike of less than 2 msec is filtered out by input pulse suppression. Also, diagnostic LEDs alert user to reverse polarity, overload, or short...

Read More »
DC-DC Converters target railway industry.
Power Supplies

DC-DC Converters target railway industry.

Housed in half-brick package measuring 2.4 x 2.28 x 0.50 in., CN200A Series operates from 60-160 Vdc with output power rating of 200 W and power density up to 73.1 W/inÂ-³. Fully-regulated power modules provide input-to-output isolation of 3,000 Vac and include current-share feature, which is suitable for paralleling 2 or more units. Equipped with standard pin-outs, baseplate-cooled...

Read More »
Labelers

The All New Joseph Brute Labeling Head Control Boxes

We are proud to announce an all new control box for the Joseph Brute label applicators. If you have an existing Joseph Brute label applicator and need new electronic control boxes give us a call. Adaptable for all Brute applicators and can be made with a new Tritronics label sensor. This new control box will eliminate the need for the brake on older models. We are using a reliable regenative KB...

Read More »
Precision Rotary Tables
Positioners

Precision Rotary Tables

Rotary Tables are used in positioning for assembly, testing and production. The manual and motorized tables and turntables are available. Worm-gear drives come in three ratios: 18: 1, 36:1 and 72:1, The knob is engraved in 0.1 degree increments; it can be replaced with a stepper motor if desired. Table size is 2.37 (6.2 cm) high, 5.27" (13.7 cm) diameter and 8.28" (210 mm) long with a 1.57"(39...

Read More »
Controls and Controllers

Heat-Trace Control is available with power line interface.

DigiTrace NGC-30 Heat-Trace Control and Monitoring System features Power Line Carrier Interface (PLI) Technology that enables temperature information to be transmitted through heat-tracing cable and power distribution wiring. PLI Technology utilizes electric heat-tracing cable as data cable, eliminating need to install additional RTD wiring to collect pipe temperature or electrical continuity...

Read More »
Capacitor Bank Control supports smart grid projects.
Controls and Controllers

Capacitor Bank Control supports smart grid projects.

Providing per-phase control and harmonic inhibitor logic, 3-Phase Model SEL-734B helps optimize power quality for smart grid projects. Remote communications and control over DNP3 make advanced volt/VAR control possible. Optional enclosure provides weather-tight protection and space to mount network radios, power supplies, and encrypting transceivers. With optional Ethernet communications, DNP3...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers