Power Supplies

Step-Up PWM/PFM Regulator IC measures 1.6 x 1.8 x 0.5 mm.

Series S-8363 in SOT-23-6 package includes N-channel MOSFET with RDS(ON) of 0.25 W, permitting output current of 300 mA. Input voltage range is 0.9-4.5 V, while output voltage can be set from 1.8-5.0 V, and current consumption is 95 Â-µA during switching stop and 3.0 µA with power-off pin set to off. Step-up DC-DC converter IC has switching frequency of 1.2 MHz and changeover from...

Read More »
STROTHMANN at EuroBLECH 2010 Trade Exhibition: Handling and Logistics Solutions for Automation
Automation Systems

STROTHMANN at EuroBLECH 2010 Trade Exhibition: Handling and Logistics Solutions for Automation

Schloss Holte - Stukenbrock, Germany - STROTHMANN Machines & Handling will attend the EuroBLECH 2010. The 21st International Sheet Metal Working Technology Exhibition will take place on October 26-30, 2010 in Hanover, Ger-many. STROTHMANN's main exhibit will be the new eight axis FEEDERplus8, which has been specifically designed for press lines and combines the advan-tages of linear feeders and...

Read More »
Modules

Laird Technologies Licenses apt-X® Audio Codec Technology for Use in Bluetooth® Stereo Audio Modules

apt-X® Technology Optimizes Sound Quality in Bluetooth®-enabled Digital Entertainment Devices St. Louis, Missouri, USA - June 14, 2010 - Laird Technologies, Inc., a global leader in the design and supply of customized performance-critical components and systems for advanced electronics and wireless products, today announced the licensing of apt-X® audio codec technology for use in its...

Read More »
Signal Receivers

Hemisphere GPS and Summit Liability Solutions Sign Agreement to Provide Customized Outback S3 Systems

Calgary, AB - (TSX: HEM) Today, Hemisphere GPS announced a multi year agreement to supply S3-S Navigator(TM) - a customized Outback S3 precision guidance system for Summit Liability Solutions (Summit). S3-S Navigator uses Hemisphere GPS' Crescent(TM) GPS receiver technology in combination with Hemisphere GPS eDriveTC(TM) for tilt control to precisely apply drilling fluids to a disposal area and...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Maple Systems Expands Allen-Bradley & Siemens Support
Controls and Controllers

Maple Systems Expands Allen-Bradley & Siemens Support

Maple Systems has just expanded their PLC support to more fully integrate their HMIs with controllers from Allen Bradley and Siemens. This important expansion in capabilities comes with their newest release of EZware. Among the enhancements of this upgrade is the ability to utilize tags with Allen-Bradley Controllers in such a way that they can be named with descriptive text the programmer...

Read More »
Interfaces

Ethernet I/O Module features web-based design.

Featuring built-in web server, Model RWM-824 provides 8 isolated open collector output channels and 8 isolated wet contact digital input channels. Each output channel supports 300 mA current driving at 10-40 Vdc and each digital input channel supports counter input (32 bits and 500 Hz max). Configuration, I/O monitoring, and I/O control can be accomplished via web browser. Supporting Modbus/TCP...

Read More »
Extraction Arm offers optimal suction and minimal resistance.
Cleaning Equipment

Extraction Arm offers optimal suction and minimal resistance.

Used for source capture of industrial dust and fumes, XA Extraction Arm features obstruction-free internal design and bell-mouth hood that optimize suction. Positioning capability enables optimal placement at source of generation, reducing amount of contaminants entering operator's breathing zone. Able to be mounted on wall as well used with portable systems, arm is available in 7, 10, and 12 ft...

Read More »
Controls and Controllers

Mass Flow Controllers accommodate FS flow rate to 55 slpm.

Modular and user-programmable, ultra-high purity GF Series employs MultiFlo(TM) technology that facilitates reprogramming of gas and full scale (FS) range in less than 30 sec without removal from gas line. Accuracy is optimized via application of gas modeling and compensation for non-ideal/non-linear gases. Along with flow settling times from 300 msec to 1 sec, controllers feature all-metal flow...

Read More »
Controls and Controllers

IND560 - Weighing Terminals

Weigh, Control, Comply, Connect The IND560 represents the latest in METTLER TOLEDO technology and is the most versatile weighing terminal available today. Choose from conventional strain gauge or high precision electromagnetic force restoration weighing technologies. Specify direct PLC or PC communication interfaces, or digital I/O control. Combine these selections with the option of panel or...

Read More »
Controls and Controllers

BlueHydraulics for Forestry Machinery: Energy Saving, Efficiency Raising, Emissions Controlled

High-efficiency hydraulic solutions from Rexroth reduce diesel fuel consumption and reduce operating costs Mobile hydraulics components and system solutions from Rexroth which are already designed for the new TIER 4 final regulations significantly reduce diesel fuel consumption and emissions in mobile work equipment used in the forestry industry. The BlueHydraulics technologies introduced at...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers