GSPS ADC/DAC Modules are available in OpenVPX and AMC form factor.
Modules

GSPS ADC/DAC Modules are available in OpenVPX and AMC form factor.

GSPS ADC/DAC Modules are offered in AMC598, VPX598, AMC589 and VPX589 versions. AMC598 and VPX598 models offer quad ADC with sample rates of up to 3 GSPS at 14-bits and quad DAC at 16-bits with rates up to 12 GSPS. These models provide RF synthesis up to 6 GSPS and are suitable for COMINT/SIGINT, radar, research and instrumentation applications. Supported by three banks of DDR4 memory, these...

Read More »
VIPER LED Series DDR4 Memory Modules offer XMP 2.0 support for automatic overclocking.
Digital Memory

VIPER LED Series DDR4 Memory Modules offer XMP 2.0 support for automatic overclocking.

VIPER LED Series DDR4 Memory Modules can be used on Intel 100/200/300 series and AMD 300 series motherboards. Units are available in red and white LED models and are equipped with black sides with silver viper logo and pattern. Products are offered in 16 GB and 8GB capacities and frequencies ranging from 2,400MHz to speed at 3,600MHz. Modules feature chips and ICs and come with limited lifetime...

Read More »
MicroSmart FC6A Plus Programmable Logic Controller comes with 24 Vdc input power.
Controls and Controllers

MicroSmart FC6A Plus Programmable Logic Controller comes with 24 Vdc input power.

MicroSmart FC6A Plus Programmable Logic Controller is available in 16 I/O model with 8 inputs and 8 relay or transistor outputs and 32 I/O version comes with 16 inputs and 16 transistor outputs. Unit can accommodate up to three plug-in discrete, analog, serial communication or Bluetooth cartridges. Product is capable of handling up to 2,060 I/O with a maximum of 511 analog I/O. FC6A Plus is...

Read More »
Ophir® BeamWatch AM Laser Beam Monitoring System uses Rayleigh scatter.
Monitoring Systems

Ophir® BeamWatch AM Laser Beam Monitoring System uses Rayleigh scatter.

Ophir® BeamWatch AM Non-Contact Laser Beam Monitoring System is used to measure key beam size, position, and quality parameters, focus spot size and beam caustic. Unit allows users to view the measured parameters in tabular, 2D, and 3D displays. Product is suitable for powder bed fusion manufacturing processes. BeamWatch AM is used to measure laser powers up to 1000 watts in-situ at rates up to...

Read More »
C-More EA9 Series Touch Panels are powered by 12-24 VDC source.
Miscellaneous Panels

C-More EA9 Series Touch Panels are powered by 12-24 VDC source.

C-More EA9 Series Touch Panels feature optional attachable AC power adapter. Units are available in 10 in. EA9-T10WCL and 15-in. EA9-T15CL-R models. Products are embedded with EA9-PGMSW programming software and are NEMA 4/4X and IP65 rated. C-more EA9-T10WCL comes with three serial, Ethernet 10/100BaseT and two USB 2.0 ports. This variant features 1024 x 600 pixel resolution and is equipped with...

Read More »
Energy Logger D550 is embedded with ecoExplorer software.
Meters

Energy Logger D550 is embedded with ecoExplorer software.

Energy Monitoring Components consist of Energy Logger D550, energy analysers and energy meters. Energy Logger D550 is used for energy consumption measurement, monitoring and integrated quality analysis of electrical supply networks. Unit enables user to collect and save impulse signals from up to 15 measurement devices. Product is integrated with a LAN and Modbus interface. This device offers...

Read More »
Techcon Announces New Products at productronica Following New Brand Launch
Controls and Controllers

Techcon Announces New Products at productronica Following New Brand Launch

Cypress, CA - November 2017 - Techcon, a leader in precision fluid dispensing technologies, today announced plans to exhibit in Hall A2, Stand 135 at productronica 2017, scheduled to take place Nov. 14 – 17, 2017 at the Messe München in Germany. Following the company’s new brand launch, company representatives will demonstrate several new products, including the TSM50BP Meter Mix, TS8100...

Read More »
Quad Power Supply Sequencers are suitable for point-of load regulators.
Sequencers

Quad Power Supply Sequencers are suitable for point-of load regulators.

Quad Power Supply Sequencers are available in ISL70321SEH and ISL73321SEH variants. Units offer power-up and power-down sequencing of DC/DC converters which powers FPGAs, DSPs and RF communications ICs. Products come with input comparators with an input threshold voltage of 600mV. Sequencers feature DONE indicator and enable users to monitor seven different fault conditions. ISL7X321SEH provides...

Read More »
Controls and Controllers

Motion Control Solutions for Tube Mills and Rollformers.

UCG builds new control systems, die accelerators, drives and other accessories to retrofit new or existing machinery in almost any industrial environment. We have the knowledge to offer you a complete turn-key system from the initial design to start-up. Located under one roof with a leading used machinery dealer, Universal Tube & Rollform Equipment Corporation, our unique relationship enables us...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics