New Controls & Controllers Products

Switching Regulator controls power for PDAs.

Single-coil S-8460 PWM combination buck and boost switching regulator-controller is suitable for single-cell Lithium-Ion devices such as PDAs, cell phones, notebook PCs and power supply modules. It includes automatic-selection control circuit, reference voltage source, oscillation circuit and error amplifier. Regulator has variable output voltage, wide input voltage range, 300 kHz oscillation...

Motion Control Chip drives stepper motors.

2-axis PCD-4521 controls two-phase unipolar or bipolar stepper motors. Sequence logic for both full and half-step modes is built-in. It can output CW/CCW pulses or excitation signals directly to drive chips, provides independent control of each axis, and controls simultaneous start and stop of all axes. Features include linear or S-curve acceleration and deceleration and idling pulse output for...

Sensing and Timing Relay is capable of dual timing.

Series ST Sensing and Timing relay is used for level sensing applications that need to detect 1 level of a liquid. Features include optional ON-DELAY, OFF-DELAY or SINGLE SHOT timing; 115 VAC input; transformer isolated sensing circuit; and voltage protected sensing input. Resistance sensing is rated at up to 10 Megohms. Additional features include sensing and output LED indicators, 10 AMP SPDT...

Modular Remote I/O's are rated Class I, Div 2.

systronÃ-® PM remote I/O modules include bus modules, digital and analog I/O modules, RS-232/RS-485 serial interfaces, central processing units (CPUs), and special purpose I/O modules. Rail mounted units measure only 22.5 or 45 mm wide. systron modules can be used to create micro PLCs. All remote I/Os are CE marked, UL listed, and CSA certified. Built-in ribbon cable simplifies interfacing...

A Comprehensive Guide to E-Mobility and E-Aviation

This white paper provides a comprehensive guide to E-Mobility and E-Aviation.

Motor Controller offers stand alone operation.

DR16 bipolar step motor controller features programmable full, half, quarter and eighth steps. Motor current is selectable between .03 and 1.5 amps with motor voltages to 48 volts. Velocities can be greater than 55,000 steps per second with 0.001 steps per second resolution. Moves can be absolute, relative, continuous, or alternate. Controller features RS-232 serial port and selectable baud rates...

I/O Module performs accurate high-voltage measurements.

Analog FieldPoint FP-AI-102, with software, allows users to directly measure high-voltage process signals without designing custom signal conditioning systems. 12-bit resolution, +/-120 V input range distributed I/O module works with all FieldPoint network modules and is designed for use in industrial environments, automotive testing for fuel cells, and high-voltage battery packs.

DC-DC Controller has adjustable output.

FAN5250 accepts input voltages from input sources, including ac wall brick adapters and battery packs ranging from 5 to 24 V. Unit performs synchronous conversion to provide over 5 A loads in typical applications. Output is adjustable by a 5-bit VID DAC between 0.6 and 1.75 V, using a low-drift onboard reference with accuracy of better than 1%. FAN5250 is available in a 24-pin QSOP package,...

Contouring Control fits cycle-controlled lathes.

MANUALplus 4110 control program machines complex workpieces on lathes with one spindle, X and Z axes, C axis or positioning spindle, and driven tool. Supporting interactive lathe operation and G-code, it performs simple operations like manual lathe. For complex contours, graphical Interactive Contour Programming calculates missing coordinates or shows mathematically possible variants so user can...

Carrier Cards connect I/O modules to CompactPCI computer.

ACPC8630 and ACPC8635 nonintelligent slave boards interface IndustryPack mezzanine I/O modules to computer. User can mix and match analog, digital, serial, or other I/O modules on 3U carrier cards to produces customizable I/O boards with high channel density, thus saving card cage slots. Carriers are plug-and-play compatible, support 2 interrupts per module, and provide individually filtered and...

3-Port Ethernet Module drives network applications.

Triple-port Ethernet module model Em104P-LAN100NT incorporates 3 Intel 82559 Ethernet controllers for flexible Ethernet networking capabilities at 10- or 100-Mbps data rates. It includes built-in 10-pin box header and RJ-45 connectors. Three definable diagnostic LEDs indicate operating status of network and module. Both 32-bit PCI-based PC/104-Plus and 16/8-bit ISA-based PC/104 interfaces are...

560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance

EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.