New Controls & Controllers Products

Shock Absorber is suited for automation equipment.

Designed for high-speed production equipment, miniature SC 650-HC features rod-ready time that facilitates cycling and enables gains in production time. Product, capable of rapid repeat strokes, features return force rated from 4.94-8.30 lb and return time of 0.20 sec. Absorbing up to 1,200 lb-in. energy per cycle, unit is suited for packaging industry equipment and rotary actuators as well as...

Wall-Mount Node Computer suits automation applications.

Designed without disk drives, fans, or moving parts, Microbox-6824 Node computer incorporates 3.5 in. embedded board with VIA Eden 667 MHz processor, CompactFlash(TM) Type-1 socket, and 16-bit PC/104 extension connector. System also provides 4 COM ports, mixed RS-232 and RS-485, and single 144-pin SO-DIMM socket with up to 512 MB memory capacity. LAN uses Realtek 8139C PCI PnP Base-T Ethernet...

Electric Actuator modulates loads up to 8,000 lb-ft.

Suited for large fan dampers typical of utility FD and ID applications, Group 22 Control Drive provides positioning of final control elements with resolution down to 0.1% of span. It is fully enclosed in weatherproof housing rated for service environments from -40 to +185Ã-

DC-DC Controller is rated for operation from -40 to 125-

Model LT3724 is suited for use in step-down, step-up, inverting, or SEPIC circuits with up to 100 W of output power. Power supply incorporating controller can convert 4-60 V input supplies to regulated output from 1.23-36 V. Operating at constant switching frequency of 200 kHz, single-chip unit includes Burst ModeÃ-® operation, which minimizes quiescent current below 100 Ã-µA. Operating...

Microcontrollers in Power Electronics

This white paper explores the power supply advantages of digital microcontrollers, as well as how digital power supplies can be used to manage entire systems.

VAV Controller helps maintain tight flow accuracies.

TALON Predator Single Duct/Dual Duct Low Flow Controller is suited for flow ranges between 150-1,200 fpm, with tightest accuracy below 400 fpm. It provides quiet operation to eliminate occupant white noise. Variable air volume controller is suited for critical environments in hospitals, laboratories, industrial buildings, and medical offices where highly accurate building control is required.

Microcontrollers offer portable sensing and measurement.

Signal-Chain-on-a-Chip Series MSP430F42x0 features integrated 16-bit ADC with 5 differential input channels, up to 8,000 samples/sec, and signal to noise and distortion ratio of 84 dB. Converter has programmable gain amplifier, 1.2 voltage reference, and input buffer to eliminate need for external signal conditioning. Microcontrollers include 32 Kb of flash memory and LCD driver with internal...

Vapor Retarder changes according to ambient humidity.

Suited for areas with seasonal changes in temperature and humidity, MemBrain(TM) smart vapor retarder changes permeability from less than 1 perm in low-humidity conditions to greater than 20 perm in high-humidity conditions. Polyamide film breathes to allow excess moisture to escape from wall cavities. This helps reduce risk and liability of concerns such as mold growth and rot due to excess...

Process Controllers offer 0.1% accuracy.

Series FB enables operator to select from autotuning, advanced autotuning, or Brilliant IT autotuning feature, which allows selectable PID control. Sampling times include 50, 100, or 250 ms. Featuring universal input, Series FB offers up to 7 digital inputs, 4 digital outputs, and 2 communications ports. Remote setpoint input and multi-memory area are standard. Units come in Ã-¼ DIN or 1/8...

AC Drives control motors rated from .25 to 3 hp.

Able to be DIN-rail or screw-mounted in control cabinets, ACS50 series ramps speeds up and down and operates motors at optimal speeds for extended periods of continuous operation. Component drives, offered in 3 frame sizes from 2 x 5.75 x 5 in. to 3 x 6.25 x 7 in., control 230 V, 3-phase motors and feature built-in 16 kHz switching frequency for silent operation. Products are available for...

Smart Power Modules target consumer appliances.

Mini-SPMs provide motor control for energy-restricted white goods such as washing machines and air conditioners. Offering thermal resistance, 7 modules each integrate 3 high-voltage ICs, 1 low-voltage IC, 6 IGBTs, and 6 fast recovery diodes. Combining analog and discrete technologies in one package, devices are housed in 44 x 26.8 mm Mini-DIP package, range from 3-30 A, and include under-voltage...