New Controls & Controllers Products

Microstepping Motor Driver has built-in translator.

With output drive capability of 35 V and Ã-

Bus Controller suits piping systems with automated valves.

Used in piping systems with 8 or more electrically or pneumatically actuated valves, Bus Control System allows all actuators in system to be controlled by PLC with one pair of wires. Actuators are daisy chained on same pair of wires, with each actuator assigned unique address for identification by PLC. Only designated actuator has ability to read and act on control instructions. In addition to...

Micro PLCs offer communication module options.

Added to Series DL05/DL06 PLCs, D0-DCM Communications Module provides 2 serial ports that support MODBUS RTU, DirectNET, and K-Sequence slave network protocols. Port 1 offers RS-232 interface operating from 9,600 bps to 115.2 Kbps, while Port 2 can be configured for RS-232 or RS422/485 interfaces, and operates from 300 bps to 115.2 Kbps. Suited for ASCII communications, 3-port CoProcessor Model...

Automation System offers operational flexibility.

Available in Basic, Enhanced, and Advanced versions for respective control over 6, 16, and 40 axes, IndraMotion for Packaging suits food processing and packaging applications. Motion Logic control system delivers real-time motion control combined with IEC 61131-3 compliant PLC, application-specific technology functions, and PLCopen motion function blocks. Off-line simulation and on-line tools...

Grips and Handles - Providing a Strong and Comfortable Grip

To learn more about the different types of Grip and Handle options available or which to select for your specific application, download our product guide.

Rolling Ring Linear Drives slow down independent of motor.

Facilitating smooth reversal, Series RG offers option whereby end stop assemblies are fitted with V-shaped cams to decrease linear speed of drive prior to reversal without using electronic controls or reducing motor speed. After reversal, cams permit smooth ramp up of drive speed, eliminating possible whipping action of tools. Slowdown cam applications include applying coatings, slitting, spray...

Slider Control produces SPI serial signal output.

Using charge-transfer spread-spectrum sensing method, Model QT401 Slider Chip provides linear or arc-based touch-sensing output with 7-bit resolution. Device uses printed circuit resistive element as capacitive sensor and will sense through 3 mm of plastic or glass. Model QT401 can be used with clear Indium-Tin-Oxide sensing elements to create LED-backlit touch zones, or to indicate slider...

Digital Signal Controllers operate from 3.3 V.

Operating at 40 MIPS, dsPIC33 family features microcontroller-centric architecture suited for embedded control. Products have 8-channel DMA, and some versions have two 1.1 Msps ADCs. All units use universal MPLABÃ-® IDE and development tools and have serial I/O subsystems. Provided in 64- to 100-pin packages, products are available with 64-256 KB self-programming Flash and 8-30 KB RAM. DSCs...

PIC-® Microcontrollers help boost performance and memory.

Manufactured in 64- to 100-pin packages with JTAG, PIC24F and PIC24H series 16-bit PICÃ-® MCUs include 22 general-purpose devices that deliver up to 16 and 40 MIPS performance, respectively. Features include ADC, DMA on PIC24H, 16 KB RAM, and 256 KB Flash program memory. Compatible with universal MPLABÃ-® IDE development-tool platform, PIC24F is 16-channel, 10-bit unit capable of 500...

GPIB Controller enables portable instrument control.

ExpressCard-GPIB delivers direct control of GPIB instruments from laptop computers with ExpressCard slot, which accepts modules based on USB 2.0 or PCI Express. To communicate with GPIB instruments at transfer rates of up to 8 Mbps, product incorporates TNT GPIB ASIC and Hi-Speed USB chip. Controller interface is transparent to software applications and drivers, and unit comes with NI-488.2 for...

Access Control Software features DVR integration.

Requiring only a network connection, MilleniumÃ-® Enterprise can display video in response to any triggered alarm. It features full integration with First Line series digital video recorders (DVR) and supports full DVR configuration from within program. SQL-based enterprise-class software, compatible with Millenium hardware, supports up to 100,000 fully distributed intelligent access points...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.