New Controls & Controllers Products

NAND Controller supports multi-level cell Flash market.

Suited for use in space-constrained consumer applications, Model SST55LD019M flash-based NAND Controller is offered in 14 x 14 mm 100-pin TQFP, 9 x 9 mm 84-ball TFBGA, and 6 x 6 x 0.85 mm VFBGA packages. It includes programmable multi-tasking NAND interface and delivers up to 10 MB/sec sustained read and write performance. Controller features dynamic wear leveling, Error Correction (ECC) engine,...

SMPS Primary Regulators feature low EMI noise.

With low EMI noise characteristics at more than 2 MHz, STR-W67xx series of low-power off-line SMPS primary regulators includes quasi-resonant topology ICs, and enables output powers up to 160 W at 120 Vac, or 240 W at 230 Vac input. Soft switching mechanism turns on internal MOSFET at close point to VDS bottom point, while bottom-skip function skips first bottom of VDS and turns on MOSFET at...

Position Controller offers fully programmable operation.

Capable of position, velocity, and current mode operation, EPOS P 24/5 can be used as stand-alone controller or to control other non-programmable EPOS units. Programmable digital motion controller measures 4.2 x 3.3 x .9 in. and communicates via RS-232 or CANopen. Capable of 5 A max continuous current (10 A peak), unit offers efficiency to 90% and features 50 kHz switching frequency. For...

Vector Drives offer multiple communication options.

With power range up to 25 hp and input voltage from 120 Vac, 1-phase to 600 Vac, 3-phase, SMVector Drives provide 4 modes of operation, including V/Hz, Enhanced V/Hz, Vector Speed, and Torque. Communication options include RS-485/Modbus, CANopen, and DeviceNet. Offering auto-tuning, low-speed control, and dynamic speed regulation, drives are suited for packaging machinery, food processing...

Ergonomics Is Good Economics

While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.

Operator Interfaces have screen sizes from 6-15 in.

Available with monochrome, STN, and 65 K color TFT displays, Series AGP3000 utilize no-grid analog resistive touchscreen technology and incorporate USB, RS232, RS422, RS485, and 10/100 Ethernet interfaces. Up to 4 network protocols can be active at once, allowing devices to act as protocol converters, data concentrators, and gateways for sharing data. Pro-Server EX HMI Data Management software...

Translation Stage measures just 9.0 x 6.5 x 2.4 mm.

With stroke of 3.2 mm and velocities of up to 80 mm/sec, Model P-652 piezoelectric, linear-motor driven, translation stage offers sub-micron resolution and holding force of 20 g. Backlash-free unit contains ultrasonic piezoelectric resonator and 2 lateral sliders pressed against it by spring that doubles as moving carriage. Operating voltage of driver electronics is 2.8-3.2 V, operating current...

Power Controllers are available in 15 A or 25 A versions.

SSNP single-phase control type and SSNZ series for zero-cross control are narrow 21.5 mm to allow for close DIN rail or screw mounting, either vertically or horizontally. Response to changing input setting is one cycle or less. Functions include ramp-up/ramp-down (soft start), auto-detecting power frequency that selects power supply of 50Hz or 60Hz, and manual control.

Microcontrollers feature up to 1 MB embedded flash memory.

Based on 0.15-micron process technology, 8-bit Fx2 series and 32-bit Fx3 series microcontrollers (MCUs) are optimized for automotive body and safety control applications. Pin counts range from 44-176, and flash memory configurations range from 32 KB to 1 MB. Line is composed of 29 MCUs: 13 based on 8-bit 78K0 CPU core and 16 based on the 32-bit V850ES(TM) CPU core. All devices support controller...

USB Hub System connects measuring gauges to computers.

Including data connection cables, 7-port industrial model USB hub, and MarCom data transmission software, MarConnect USB Interface Kits enable universal assembly of multiple measuring systems for data transmission. With additional hubs, up to 100 measuring devices can be connected using USB interface, and software can transfer measure values directly Excel spreadsheets or text files. Measuring...

Debug Interfaces support Freescale ColdFire/DSP processors.

While OCDemon usb2Sprite provides USB 2.0 interface to on-chip debugging features of ColdFire and DSP 56300 microprocessors offering solution for designing, debugging, and programming embedded hardware and application software. Pre-built GNU tools and sample configurations contain source, gdbinit, and make files, allowing developers to build, download, and debug via gdb. Flash Programmer provides...

Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance

Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.