Timer Controller works on pneumatic conveying systems.
Series DCT500 provides continuous or on-demand cleaning for receivers and pulse jet systems. Available in 4, 6 or 10 channels, each unit features 2 potentiometers for selecting time-on and time-off settings. High limit and Low limit control inputs are provided for use with on demand systems. For added safety, control circuitry, including control inputs, are isolated from line voltage.Read More »
Interface Module works with laser gauge.
Computer software and interface module connect company's Laser Microgage system to PC or laptop. This allows readings to be acquired, plotted, and analyzed in field for fast machinery alignment and response. Interface provides measuring resolution to 0.00001 in. or 0.25 micron. Module is packaged in compact aluminum housing with serial RS232C output connector that couples directly to any serial...Read More »
Crane Control operates up to four receivers.
telePilot uses Palm Pilot-® to program transmitter's synthesized frequency and on-board flash memory configuration via infrared signal. Watertight and submersible, transmitter features up to 5 motions and 2 speed operations. Gold contact metal switches have rated life of over 1 million cycles. telePilot receiver is synthesized and pre-wired for transfer switch.Read More »
Temperature Controller fits on DIN rail.
R6000 temperature controller accepts 8 channels of thermocouple and RTD inputs and has response time of 100 msec for 8 control zones. It features RS485, Modbus, Profibus DP, CAN and CANOpen interfaces; 16 digital I/O that are configurable for any zone; and LED status display for I/O. Four analog outputs are available as option. Applications include plastics injection molding, plastics extrusion,...Read More »
A Definitive Guide to Air Gaps in Magnetic Separation Equipment
This guide discusses how air gaps affect magnetic separation applications.Read More »
Bluetooth Module provides compact wireless communications.
Compact LTCC RF module measures 7 x 7 x 1.8 mm, uses one-third less power than company's other modules, and provides Bluetooth 1.1-compliant Class 2 (max 4dB) output. It complies with Silicon Wave RF and Blue-RF interfaces, and GSM and CDMA de facto standards. Low temperature co-fired ceramic substrate includes filter, inductors and capacitor. Applications include wireless communications devices...Read More »
Plastic Control Valves feature bellows seals.
Model l000B series low-flow control valves, available with PTFE bellows seals are suitable for corrosive applications. They feature all-plastic construction, various Cv's, and pneumatic or electronic operation. Permeation-resistant PTFE bellows seal is designed for use in hazardous or corrosive environments; back-up stem seal packing arrangement is incorporated in each valve for additional...Read More »
Position Control Sensors feature ASCII serial protocol.
Temposonics-® S Series ServoSensors combine sensor and embedded closed-loop position controller. ASCII protocol and Windows(TM) application setup software enable use of common translator software. Model SH rod style sensors are designed for internal mounting where high pressure conditions exist (5,000 psi continuous/10,000 psi spike). Model SP profile sensors are magnet-mounted and are used in...Read More »
Motion Control Chip handles one stepping motor.
Single-axis PCD-4511, for two-phase unipolar or bipolar stepper motors, can output CW/CCW pulses or excitation signals directly to drive chips. It has sequence logic for full and half step modes, simultaneous start and stop, linear or S-curve acceleration and deceleration, idling pulse output for start, and various limit signals. Applications include semiconductor manufacturing, inspection...Read More »
Thermoelectric Module includes communications port.
Model 5C-195 Thermoelectric Module/Heater Controller AC input-variable DC output voltage controller for thermoelectric modules can be used for either heating or cooling applications. It accepts input voltages of 110/220 VAC, 50/60 Hz, and incorporates internal power supply that provides adjustable load circuit voltages from 3 to 16 VDC. 2 ampere maximum output current limits range from load...Read More »
Operator Interface is Ethernet-enabled.
OptoTerminal-G70 graphics-based operator interface is for use with company's SNAP Ethernet I/O and SNAP Ultimate I/O systems. It features 5.5 in. diagonal, 320 x 240 pixel, color touch screen; soft keys; and programmable speaker. Terminal is used to send commands and receive real-time data from plant floor equipment and other real world devices connected to hardware for purposes of automation,...Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.Read More »