Vibration Analyzer accepts accelerometer and microphone inputs.
Monitoring Systems

Vibration Analyzer accepts accelerometer and microphone inputs.

Portable ZonicBook is available in 4, 8 or 16-channel configurations, simultaneously samples all channels at 51.2 kHz, and provides FFT, integration/differentiation, averaging and octave analysis. It comes with Windows-based eZ-Analyst software. Analyzer can be operated from 12Vdc battery for in-vehicle and portable sound and vibration applications, as well as ac power for lab applications....

Read More »
Automation Systems

Load Port and Pod meet SEMI standards.

Model G3 front-opening unified pod (FOUP) and SMIF-300FL(TM) Front-Load Series 3-EP load port offer particle cleanliness, as well as interoperability and transition capabilities to 300mm equipment. G3 FOUP features integrated bottom conveyor groove, metal-free door with fail-safe 300mm load port docking and integrated ID tracking. SMIF-300FL Series 3-EP 300mm load port features options for...

Read More »
Motion Controller Board handles 4 axes simultaneously.
Controls and Controllers

Motion Controller Board handles 4 axes simultaneously.

Double size PC-MIP board can be used on CompactPCI, PCI, VME and embedded platforms with high speed PCI bus interfaces. Chipset supports steppers, sinusoidal commutation of brushless motors, and positioning and velocity control of brush servo motors. Any axis can be selected to be brush or brushless. Instruction set supports 130 commands plus selectable profiling modes including S-curve,...

Read More »
Switching Regulator controls power for PDAs.
Electrical Regulators

Switching Regulator controls power for PDAs.

Single-coil S-8460 PWM combination buck and boost switching regulator-controller is suitable for single-cell Lithium-Ion devices such as PDAs, cell phones, notebook PCs and power supply modules. It includes automatic-selection control circuit, reference voltage source, oscillation circuit and error amplifier. Regulator has variable output voltage, wide input voltage range, 300 kHz oscillation...

Read More »
Motion Control Chip drives stepper motors.
Controls and Controllers

Motion Control Chip drives stepper motors.

2-axis PCD-4521 controls two-phase unipolar or bipolar stepper motors. Sequence logic for both full and half-step modes is built-in. It can output CW/CCW pulses or excitation signals directly to drive chips, provides independent control of each axis, and controls simultaneous start and stop of all axes. Features include linear or S-curve acceleration and deceleration and idling pulse output for...

Read More »
Sensing and Timing Relay is capable of dual timing.
Controls and Controllers

Sensing and Timing Relay is capable of dual timing.

Series ST Sensing and Timing relay is used for level sensing applications that need to detect 1 level of a liquid. Features include optional ON-DELAY, OFF-DELAY or SINGLE SHOT timing; 115 VAC input; transformer isolated sensing circuit; and voltage protected sensing input. Resistance sensing is rated at up to 10 Megohms. Additional features include sensing and output LED indicators, 10 AMP SPDT...

Read More »
Modular Remote I/O's are rated Class I, Div 2.
Modules

Modular Remote I/O's are rated Class I, Div 2.

systron® PM remote I/O modules include bus modules, digital and analog I/O modules, RS-232/RS-485 serial interfaces, central processing units (CPUs), and special purpose I/O modules. Rail mounted units measure only 22.5 or 45 mm wide. systron modules can be used to create micro PLCs. All remote I/Os are CE marked, UL listed, and CSA certified. Built-in ribbon cable simplifies interfacing...

Read More »
Motor Controller offers stand alone operation.
Motor Controllers and Drives

Motor Controller offers stand alone operation.

DR16 bipolar step motor controller features programmable full, half, quarter and eighth steps. Motor current is selectable between .03 and 1.5 amps with motor voltages to 48 volts. Velocities can be greater than 55,000 steps per second with 0.001 steps per second resolution. Moves can be absolute, relative, continuous, or alternate. Controller features RS-232 serial port and selectable baud rates...

Read More »
I/O Module performs accurate high-voltage measurements.
Modules

I/O Module performs accurate high-voltage measurements.

Analog FieldPoint FP-AI-102, with software, allows users to directly measure high-voltage process signals without designing custom signal conditioning systems. 12-bit resolution, +/-120 V input range distributed I/O module works with all FieldPoint network modules and is designed for use in industrial environments, automotive testing for fuel cells, and high-voltage battery packs.

Read More »
DC-DC Controller has adjustable output.
Electrical Regulators

DC-DC Controller has adjustable output.

FAN5250 accepts input voltages from input sources, including ac wall brick adapters and battery packs ranging from 5 to 24 V. Unit performs synchronous conversion to provide over 5 A loads in typical applications. Output is adjustable by a 5-bit VID DAC between 0.6 and 1.75 V, using a low-drift onboard reference with accuracy of better than 1%. FAN5250 is available in a 24-pin QSOP package,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers