I/O Module performs accurate high-voltage measurements.
Modules

I/O Module performs accurate high-voltage measurements.

Analog FieldPoint FP-AI-102, with software, allows users to directly measure high-voltage process signals without designing custom signal conditioning systems. 12-bit resolution, +/-120 V input range distributed I/O module works with all FieldPoint network modules and is designed for use in industrial environments, automotive testing for fuel cells, and high-voltage battery packs.

Read More »
DC-DC Controller has adjustable output.
Electrical Regulators

DC-DC Controller has adjustable output.

FAN5250 accepts input voltages from input sources, including ac wall brick adapters and battery packs ranging from 5 to 24 V. Unit performs synchronous conversion to provide over 5 A loads in typical applications. Output is adjustable by a 5-bit VID DAC between 0.6 and 1.75 V, using a low-drift onboard reference with accuracy of better than 1%. FAN5250 is available in a 24-pin QSOP package,...

Read More »
Contouring Control fits cycle-controlled lathes.
Controls and Controllers

Contouring Control fits cycle-controlled lathes.

MANUALplus 4110 control program machines complex workpieces on lathes with one spindle, X and Z axes, C axis or positioning spindle, and driven tool. Supporting interactive lathe operation and G-code, it performs simple operations like manual lathe. For complex contours, graphical Interactive Contour Programming calculates missing coordinates or shows mathematically possible variants so user can...

Read More »
Carrier Cards connect I/O modules to CompactPCI computer.
Modules

Carrier Cards connect I/O modules to CompactPCI computer.

ACPC8630 and ACPC8635 nonintelligent slave boards interface IndustryPack mezzanine I/O modules to computer. User can mix and match analog, digital, serial, or other I/O modules on 3U carrier cards to produces customizable I/O boards with high channel density, thus saving card cage slots. Carriers are plug-and-play compatible, support 2 interrupts per module, and provide individually filtered and...

Read More »
3-Port Ethernet Module drives network applications.
Interfaces

3-Port Ethernet Module drives network applications.

Triple-port Ethernet module model Em104P-LAN100NT incorporates 3 Intel 82559 Ethernet controllers for flexible Ethernet networking capabilities at 10- or 100-Mbps data rates. It includes built-in 10-pin box header and RJ-45 connectors. Three definable diagnostic LEDs indicate operating status of network and module. Both 32-bit PCI-based PC/104-Plus and 16/8-bit ISA-based PC/104 interfaces are...

Read More »
Control System optimizes engine performance.
Controls and Controllers

Control System optimizes engine performance.

Engenius ESM Engine System Manager, directed by Engine Control Unit (ECU) monitors speed, pressure, temperature and other engine conditions; controlling ignition timing, speed governing and stop/start functions. It also provides diagnostic help and fault logging when requested. System can be packaged to instantly communicate to Internet server, computer, phone or pager via satellite, cellular...

Read More »
Ultrasonic Positioner measures travel of valve blade.
Valve Positioners

Ultrasonic Positioner measures travel of valve blade.

EP 2000 compares valve position to valve control signal, and provides valve open, valve closed, positioner start, positioner stop, and valve blade not in position indications. It works with 4 to 20 mA signal from DCS system, where at 4 mA signal valve is completely closed, at 20 mA completely open. Probe can also be trained to use 4 to 20 mA signal for partially opening and closing valve.

Read More »
Worm Gear Drives provide ratios from 1:1 to 60:1.
Motor Controllers and Drives

Worm Gear Drives provide ratios from 1:1 to 60:1.

DAW Series multi-speed transmissions will shift on-the-fly under full load. Model DAW is rated at up to 50 input HP at 1800 RPM and comes in 4 basic configurations. DAW-S is single input with single output shaft; DAW-SD is single input with dual output shafts that may be solid or split; DAW-DS is single input with dual output shafts and output shafts are coaxial shaft-over-shaft; DAW-SI is single...

Read More »
Intelligent Controllers feature modular designs.
Motor Controllers and Drives

Intelligent Controllers feature modular designs.

SMC-3(TM) 3-phase Smart Motor Controller includes standard overload protection with adjustable trip class, motor and system diagnostics, configurable auxiliary contacts, and multiple start and stop modes. SMC-Delta(TM) reduced voltage starter is designed for star-delta (6-lead motor) applications. It incorporates transitionless start, and combines contactors, overload relays, timers, and internal...

Read More »
Ethernet Module produces pneumatic pressures.
Interfaces

Ethernet Module produces pneumatic pressures.

Model ENETCPM control pressure module can supply pneumatic pressures or relay logic on demand, based on commands sent via Ethernet or Internet. It has eight digital circuits controlled by onboard microprocessor: three are for internal solenoid valves, and five circuits are available for lights, switches or valves. Communication is 10BaseT via TCP/IP protocol. Its embedded web server communicates...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers