Motor Drive ICs cool fan motors.
Motor Controllers and Drives

Motor Drive ICs cool fan motors.

FAN8404D and FAN8408D are 2-phase, half wave motor drive ICs capable of sinking 1.2 A motor load current, while requiring 2.2 mA supply current in stand-by. FAN8408D features Hall output (HO) for motor speed detection and FAN8404D offers alarm output to signal fan lockup. Operating voltages range from 4 to 15 V. Units include built-in thermal shutdown (TSD) circuits, reverse-current protection...

Read More »
Motor Controllers and Drives

Digital Drives work with servo motors.

DR100EE Series can be used with brushed or brushless, rotary or linear servo motors. It has 20 kHz digital current loop that uses Space Vector Modulation (SVM) switching techniques that result in higher current loop bandwidth and lower heat dissipation. Drive configuration and tuning can be accomplished through graphical and intuitive Windows based utility using serial RS232/485 communication...

Read More »
Relay Output Module clips onto microPLC.
Controls and Controllers

Relay Output Module clips onto microPLC.

RO108M attaches to side of Series T1-16S microPLC and can switch/control 100 to 240 Vac or 5 to 24 Vdc. Each T1-16S accommodates up to 5 relay output modules. TRO108M can be used wherever it is necessary to have relay contact switch ON/OFF in control circuit. It allows T1-16S to control, alarm, or monitor based on system conditions, including: Turn ON/OFF motors, solenoids, or interposing relays;...

Read More »
Switching Regulators provide small footprint.
Electrical Regulators

Switching Regulators provide small footprint.

S-835X Series of PWM and PWM/PFM CMOS switching regulators consist of reference voltage source, oscillation circuit, error amplifier, phase compensation circuit, PWM control Circuit (S-8355/57) and PVWM/FM switching control circuit (S-8356/58). Oscillation frequencies of 100, 250, and 300 kHz are available. Regulators have low operation current consumption of 25.9 microA (3.3 V, 100 kHz). SNB6B...

Read More »
Instruments provide height and level measurement.
Gages

Instruments provide height and level measurement.

Z-Cal 600 XT Height Gage offers 24 in. range and 2D (X-Y) software capability. It requires low measuring force and features motorized movement, full numeric keypad, and air-bearing base. Wyler Radio Module for Minilevel/Levelmeter NT 2000 provides error-free data transmission over long distances without connecting cables. This allows measurement of big structures such as large machine tools,...

Read More »
Controls and Controllers

Sortation Control runs on Windows(R) NT/Windows 2000.

FASTSort(TM) includes configurable software for I/O and device controls, sortation tracking and acknowledgement, and performance diagnostics. It provides sortation control, including scan, track, sort, confirm, report and statistics features. FASTSort supports up to 27 tachometers, 800 input devices, 800 output devices, and multiple induct scanners. It controls all divert methods, including tilt...

Read More »
Tool Compensator works while in motion.
Compensators

Tool Compensator works while in motion.

Servo-controlled tool compensator system uses servo-motors with inherent high torque ratings instead of stepper motors so it can compensate tools while machine is working. Servo motor is able to directly hold tool point in position while tool is in contact with, and machining, the workpiece allowing machining center to maintain feed rates for multiple tools. This also eliminates tool marks on...

Read More »
Controls and Controllers

Control Equipment works in paper industry.

Machine control packages include: 56AMXN, which allows application running on ControlLogix to communicate with Reliance AutoMax(TM) control system or remote I/O networks; 1756 drive which allows users to keep Reliance DPS drives when updating to ControlLogix; Multibus ControlNet (MBCN), which allows application running on Reliance AutoMax controller to communicate with ControlNet I/O devices; and...

Read More »
Rectifiers and Diodes

Diodes and Receivers meet 10 Gigabit Ethernet specs.

Fabry-Perot (FP) and Distributed Feedback (DFB) laser diodes, indium gallium arsenide (InGaAs) avalanche photodiode (APD), and PIN receivers deliver performance needed by 10 Gigabit Ethernet, DWDM and SONET applications. Un-cooled FP and DFB laser diode chips meet OC192 SONET specifications. FP laser diode chip can transmit over distance of 600 meters, while DFB laser diode chip can transmit over...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers