Chatter Prediction System provides tool path optimization.
Testers

Chatter Prediction System provides tool path optimization.

VulcanCraft Performance chatter prediction and avoidance system is designed for conventional and high speed machining applications. It uses non-contact electromagnetic device to capture machine and tool dynamics controlling chatter sensitivity. Dynamics data is seamlessly and automatically transferred to fast chatter analysis software program.

Read More »
Control Package safeguards press brakes.
Controls and Controllers

Control Package safeguards press brakes.

Designed for mechanical and hydraulic press brakes, control package consists of safety light curtains, supplemental guards, mirrors, control reliable mute, and press brake control. Light curtain system incorporates 2 mirrors arranged to guard throat of press brake, providing access to bed of machine for die changes, without operator having to open or remove guards.

Read More »
Multifunction Mezzanine Card conserves PMC slots.
Modules

Multifunction Mezzanine Card conserves PMC slots.

PMC730 module performs analog input, analog output, digital I/O, and counter/timer functions on one card. Multifunction PCI mezzanine card (PMC) plugs into PMC slots on VMEbus or CompactPCI(TM) CPU boards. Its 16-bit A/D converter with 512 sample RAM scans inputs in 10 microseconds per channel for 100 kHz throughput. Eight analog channels are provided with ±10 V signal range, and digital...

Read More »
Controls and Controllers

Burner Controller can be configured by keypad or PC.

PMA Model KS 40-1 controls multiple industrial burners with modulating or sequential control functions. Control can be switched from on/off of sequential burners to motorized control of modulating burners, allowing use of different fuels. It can operate burners in parallel, as positioner that follows output signal from another controller, or it can accept second temperature or pressure input as...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Sheeter/Stacker offers continuous operation.
Automation Systems

Sheeter/Stacker offers continuous operation.

Non-Stop Inline Sheeter/Stacker takes material coming off production system and sheets it; sheets are then stagger-stacked onto pallets that are automatically changed out when full. Festoon-type accumulator allows on-the-fly change out. While pallets are being changed, accumulator collects web so web does not have to stop.

Read More »
Spray Head Assembly operates on threadless shaft.
Motor Controllers and Drives

Spray Head Assembly operates on threadless shaft.

Spray Head Drive Assembly provides automatic, instantaneous reversal without electronic controls or programming. No adjustments to motor's speed or rotational direction are needed to change travel direction or linear speed. Assembly eliminates backlash because linear drive uses rolling ring bearings. Axial thrust capability ranges from 6 to 800 lbs, depending on model selected. Travel speed is up...

Read More »
Temperature Controller functions in 15 or 30 amp mainframe.
Controls and Controllers

Temperature Controller functions in 15 or 30 amp mainframe.

Microprocessor-based Model TM215M closed-loop module, for plastics processing, is used with Type J or Type K thermocouples. It compares measured temperature to operator's chosen setpoint, and regulates current to electric heater to maintain temperature at setpoint. Digital display shows controlled temperature (in deg F or C) or output amperage. Soft Start mode runs heater at 25% of full power for...

Read More »
Controllers offer 3-phase alarm.
Controls and Controllers

Controllers offer 3-phase alarm.

CB Series is available with 2-point input for 3-phase Heater Break Alarm (HBA) in addition to single phase. Alarm detects heater load that has been partially or completely broken. HBA function requires 30 or 100 Amp current transformer to check actual amperage on heater load. Controllers come in 1/16, 1/8 vertical and horizontal, 72 mm, and 1/4 DIN sizes. They accept thermocouple, RTD, current...

Read More »
Power Entry Module offers built-in RFI filter.
Modules

Power Entry Module offers built-in RFI filter.

EC Series combines integrated on/off switch and ac receptacle built to IEC/EN 60320-1/C20 specs. Recessed, 2-pole switch protects against accidental actuation. In-rush rating is 100 A for 5-6 msec. Module is UL and CSA approved for up to 20 A at 125 and 250 V, and VDE approved for up to 16 A at 250 V. Type EC12 filtered version meets standard and medical grade attenuation requirements. Filter...

Read More »
HART Module allows more variables from existing devices.
Transmitters

HART Module allows more variables from existing devices.

Compact DIN-rail mount HIM Smart HART Loop Interface and Monitor obtains up to 3 additional analog process measurements from smart HART multivariable mass flow, level, pressure and pH transmitters. Using HART digital data that rides on 4-20 mA current loop, module breaks out signals representing any combination of transmitter's primary, second, third, or fourth measurement variables. Dual alarm...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers