Microcontrollers feature single-cycle 8051 processor.

Operating at 5 V, Versa Mix 8051 Family of mixed-signal, single-chip microcontrollers are suitable for signal conditioning and DAQ applications. QFP-64 VMX51C1020 and QFP-44 VMX51C1016 packages integrate MULT/ACCU unit with 32-bit barrel shifter, 56 KB of Flash, and 1,280 bytes of RAM. Peripherals include 5/7-channel, 12-bit A/D converter, up to 28 general purpose I/O's, three 16-bit timers, 4...

Read More »

Microcontrollers offer 8-bit architecture and 32 KB Flash.

Featuring 16 or 32 KB Flash program memory and 1 KB RAM in 28- and 40-pin packages, PIC18F45J10 family of 8-bit microcontrollers offers 40 MHz performance at 3 V. Models PIC18F45J10/44J10/25J10/24J10 incorporate 10-bit, 10- or 13-channel ADC; comparator; USART; 2 SPI ports; 2 I2C(TM) ports; and Enhanced Capture Compare PWM peripherals. General-purpose by design, products also come with MPLAB®...

Read More »

Microstepping Drive provides up to 5 A continuous current.

Fully enclosed ION(TM) Microstepping Digital Drive provides motion control, asynchronous serial or CANbus network connectivity, and amplification for dc brush, brushless dc, or step motors. Unit supports 2-phase bipolar motors, and can automatically switch between user-defined current modes. Microstepping resolution is programmable up to 256 -µsteps/step. Selectable profiling modes include...

Read More »

RAID Adapter suits space-limited storage environments.

Based on Intel® XScale(TM) processor, SATA II 3 Gb/s MegaRAID® Adapter includes 133 MHz PCI-X host interface, 8 SATA II ports, and 128 MB onboard DDR I cache. Fully backward compatible with all SATA 1.5 Gb/s drives, unit offers Native Command Queuing, enclosure management, staggered spin-up, hot plug, and port multiplier. Status of hard drives is indicated through LEDs on chassis. Software...

Read More »

Microcontrollers suit automotive dashboard applications.

Supplied in 144-pin quad flat package, V850E/Dx3(TM) MCUs consist of 2 subseries with 24 or 48 MHz V850(TM) 32-bit RISC CPU core. Products provide 128 KB to 2 MB of flash memory and up to 32 KB RAM. In addition to stepper motor drivers, LCD controllers/drivers, parallel LCD bus interfaces, and sound generators, integrated on-chip application-specific peripherals include up to 16 A/D channels, 2...

Read More »

Car Audio MCUs have 32-bit architecture and flash memory.

Targeting automotive audio control, V850ES/Sx3(TM) microcontrollers (MCUs) are available in 144-pin V850ES/SJ3(TM) and 100-pin V850ES/SG3(TM) subseries. With flash memories from 256 KB to 1 MB, designers can write software to internal memory to support additional functionality. Both products support in-car CAN standard and are resistant to EMI noise for increased audio fidelity. They are also...

Read More »
Secure USB UART/FIFO offers 3-in-1 functionality.

Secure USB UART/FIFO offers 3-in-1 functionality.

Along with internal security dongle, FT232R USB 1.1 to serial UART interface internally incorporates formerly external passive components such as clock circuit, EEPROM, and USB resistors. Internal unique ID is installed as part of die fabrication which can be used to protect user application, and internal EEPROM can be programmed with individual vendor ID and product ID. Asynchronous and...

Read More »
PFC Controller targets high-end AC-DC adapters.

PFC Controller targets high-end AC-DC adapters.

Operating in Transition Mode(TM), Model L6563 provides solution for applications ranging from 100-300 W. Power in excess of 400 W can be managed by implementing Fixed-Off-Time architecture. Current mode IC includes input voltage feed-forward, tracking-boost operation, inductor saturation detection, and leading edge blanking, as well as direct interface to cascaded dc-dc converter's PWM...

Read More »
Remote Monitoring/Control System reports emergencies.

Remote Monitoring/Control System reports emergencies.

LinkTx allows GSM mobile or GSM-enabled computer system to receive alarms and other information from remote locations. Also available as OEM PCB set, SMS-based monitoring unit features template-driven command system through which users can send text messages to turn equipment on or off. Up-to-date measurement and alarm information can be received directly by mobile phone or PC, and emergency...

Read More »

Process/Temperature Controller has Profibus® DP Slave.

Featuring 100 ms sampling time, gammadue® Series X5 Process Controller is available with Profibus® DP Slave, Modbus®/Jbus RTU Slave, and MASTER Modbus®/Jbus protocols. It accepts RTD, thermocouple, differential temperature, and current and voltage linear inputs. Along with 3 configurable digital inputs, unit provides selectable control modes as well as Advanced PID with overshoot control....

Read More »

All Topics