Tension Switch lets user vary tension levels during winding.

Controlled remotely by existing winder controller, Switchable Tension Stepper, Model 300 allows user to set up to 4 predetermined tension levels that adjust automatically during winding cycle. Users can accelerate coil winding at one tension level, then adjust to another tension level for regular winding speed, and use another tension level for deceleration and tapping. Model 300 retrofits to...

Read More »

I/O Accessories withstand harsh, industrial environments.

Series ZK1020 IP-Link Bridge Connectors and Series ZS5300 I/O Mounting Rails are suited for applications that require IP67-rated I/O terminals mounted outside of cabinet and directly on machines. Connectors are used for high-density, side-by-side Fieldbus Box I/O mounting where modules are 0-5 mm apart. Made of 1.5 mm thick stainless steel with pre-cut M3 threads to attach I/O modules, Mounting...

Read More »
Wireless Ethernet I/O Modules can be controlled remotely.

Wireless Ethernet I/O Modules can be controlled remotely.

Equipped with embedded JAVA web page, digital ADAM-6000W series uses wireless Ethernet standard 802.11b and supports Modbus/TCP and UDP protocols. Models ADAM-6050W/6051W/6060W feature inputs that can be configured to read frequency signal and act as counter, latching input, or normal input. Outputs can be configured as pulse, delayed, and standard outputs. Each unit allows 8 simultaneous web...

Read More »

D-Sub Connector interfaces between I/O and controllers.

Suited for industrial control and automation applications, IMDS Module is available with pluggable terminal blocks and either male or female D-Sub connectors. In standard 9-50 position D-Sub configurations, module mounts either on DIN rail or directly on panel. Six plated through holes per circuit allow users to modify module by adding electronic components, and 26-12 AWG terminal blocks are...

Read More »
Programming Interface suits CNC operating platforms.

Programming Interface suits CNC operating platforms.

ByVision Control incorporates 15 in. touch-screen that facilitates user-navigation of screen selections for setup and operation. Operating with Windows XP®, it guides operator through programming and manufacturing process; program data transmissions are transferred between ByVision control interface and CNC utilizing network communications. For complete process integration, Bysoft v6.6 offers...

Read More »
Variable Frequency Drives feature ratings up to 690 Vac.

Variable Frequency Drives feature ratings up to 690 Vac.

Engineered to meet water and wastewater application demands, VLT® 8000 AQUA series is comprised of models rated from 125-600 hp, 380-500 Vac and 50-400 hp, 525-690 Vac. Products provide variable- or constant-torque operation at 98% operating efficiency. Available in 2 frame sizes with Chassis/IP00, NEMA1/IP21, or NEMA12/IP54 enclosures, drives have modular construction, built-in Class A2 RFI...

Read More »

Fuel Monitoring System utilizes two flow meters.

Fuel Monitoring System consists of 2 JV-KG positive displacement flow meters, 1 for supply line and 1 for return line, as well as Model FEM-03A2 flow monitor that displays flow rate and net fuel consumed. Featuring all metal construction, flow meter measures flow rates as low as 4 cc/min and offers pressure rating to 5,000 psi. Remote reporting is enabled by 4-20 mA output. System is adaptable to...

Read More »

Ethernet Module targets prototyping and production.

Based on Freescale Semiconductor ColdFire(TM) 66 MHz, 32-bit MCF5213 processor, Mod5213 is mounted onto 40-pin DIP and comes equipped with IDE, Project Manager, and fully preemptive RTOS. IDE integrates compiler, linker, and debugger supporting both C and C++. Fully static ColdFire core provides flexible power management with standby of 130 -µA and full-speed operating current below 50 mA. With...

Read More »
PMC Card facilitates addition of GigE networking.

PMC Card facilitates addition of GigE networking.

Offered as air- or conduction-cooled, dual-port PGE2 is powered by Intel 82546EB Gigabit Ethernet (GigE) Controller and simplifies addition of GigE networking into existing VME, cPCI, or PCI embedded systems. Product has 32/64-bit, 33/66 MHz PCI bus; 64 KB FIFO buffer memory per port; and 0 to +50°C standard operating temperature. It supports single or dual 10/100/1000BaseTX using standard RJ-45...

Read More »

Indexer Table features open-center architecture.

Suited for reciprocating (2-position) applications, OT Series provides open center for routing utilities or ancillary equipment, such as robots or pick and place devices. Unit can be supplied with electric or all-pneumatic drive and is insulated to isolate drive components from electrical transfer. Supplied completely assembled, wired, and tested, machine is offered with diameters from 24 in. to...

Read More »

All Topics