Miscellaneous Controllers

Microcontroller features 128 Kb of Flash program memory.

Suited for I/O management, industrial and motor control, smart sensors, and set-top boxes, Model AT89C51RE2 operates from 2.7-5.5 V and 2-40 MHz, and achieves 4 MIPS throughput at 40 MHz. Device comes with 8 Kb of RAM, 2 UARTs, watchdog timer, power-on-reset, power-fail detector, PCA, and up to 50 general-purpose I/Os. On-chip debug capability with Windows IDE interface allows access to debugging...

Read More »
Communication Systems

Bluetooth Module operates in -40 to 70°C temperature range.

Offering 6 general purpose I/O lines, PearlBlue Class 1 (up to 100 m range) module implements transparent UART-to-Bluetooth interface bridge in master/slave mode, offering wireless solution for embedded applications. It connects radio serial port to physical UART that can be interfaced to any embedded microcontroller, PDA, or computer. Radio power is 14 dBm at carrier frequency of 2.4 GHz, while...

Read More »
Modules

I/O Modules include diagnostics and ATEX compliance.

Designed for Tricon triple-modular-redundant safety and critical control systems, Triconex I/O Modules offer high point density, per-point supervision, and user-configurable nominal load limits in digital units. With ATEX compliance, modules and external termination panels enable users to comply with nonincendive and thermally limited termination directives without need for isolation barriers or...

Read More »
Profilers

Automated Optical Profiler enables non-destructive analysis.

NanoScale(TM) HS200A(TM) acquires images that slice through sample at varying heights, then combines images into 3D model. Advanced confocal microscopy enables it to collect data simultaneously via multiple confocal apertures, accelerating data acquisition process and allowing it to construct and display 3D images in seconds. System is suited for 3D imaging and metrology of rough or sloped...

Read More »
BS&B Wireless, L.L.C Announces Class I, Division 1 Approval Awarded to SmartDisk® Wireless Monitoring System
Monitoring Systems

BS&B Wireless, L.L.C Announces Class I, Division 1 Approval Awarded to SmartDisk® Wireless Monitoring System

New Design Meets Requirements for Hazardous Areas Even When Combustible Gases or Vapors are Present During Normal Operating Conditions. TULSA, Okla. - Dec. 06, 2006 - BS&B Wireless, L.L.C announces that the SmartDisk® Wireless Monitoring System has been certified Intrinsically Safe for Class I, Division 1 applications. This allows the battery powered SmartDisk transmitters to be installed...

Read More »
Control Unit features built-in power supply.
Modules

Control Unit features built-in power supply.

Available in 24 Vdc, 120 Vac, and 230 Vac versions, SKF® SCU Smart Control Units can synchronize speeds of up to 6 different actuators and store frequently used positions for quick selection using only one command. They feature standardized plug system, 3 or 6 channels for actuators, and adjustable operating parameters. Single fault safety interrupts or prevents movement of all actuators...

Read More »
Modules

Line Interface Unit features 21 independent E1 channels.

Model XRT59L921 performs driver and receiver functions to convert bipolar signals to digital logical levels, and vice versa. It supports capacitive coupled inputs for receivers and balanced interfaces that require transformers on receiver and transmitter sides. Unit provides transmit output pulses compliant with ITU-T G.703 pulse template requirement for 2.048 Mbps (E1) rates, and supports pulse...

Read More »
Electrical Connectors

Connector Modules target 10 Gigabit Ethernet applications.

Suited for use with 10 Gb hot-pluggable optical transceivers, XFP001/2/3-L Series supplies EMI protection. Cage and connector comply with MSA 3.0 standard and support OC192/STM-64, 10 Gb Fibre Channel, G.709, and 10 Gb Ethernet protocols. Standard 1 x 1 cage measures 21.7 x 65.3 x 13.2 mm and comes with clip and heat sink. Cage is made of nickel-plated copper alloy to prevent oxidation....

Read More »
Power Control provides 1-10 channels.
Miscellaneous Controls

Power Control provides 1-10 channels.

Configured with 1-10 channels of ac power, Multi-Channel Power Control is suitable for vibratory feeders, lighting, and heating applications. Each channel can provide up to 12 A of half-wave or full-wave adjustable power at 115 or 230 Vac. Power to load is varied by adjusting phase angle, as determined by separate signal inputs. Individual signals may be 0-10 Vdc, 0-5 Vdc, or 4-20 mA. Manually...

Read More »
Miscellaneous Software

QNX Neutrino RTOS Now Works with National Instruments Data Acquisition Devices

OTTAWA, Nov. 13 -- QNX Software Systems today announced that its QNX® Neutrino® realtime operating system (RTOS) is now supported by the National Instruments Measurement Hardware Driver Development Kit (MHDDK) and PCI multifunction data acquisition (DAQ) devices. As a result, design engineers can choose from the immense range of NI DAQ products -- from low-cost single-function units...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers