Controls & Controllers

Controls & Controllers, Timers & Clocks

Multi-Timers and Time Switches meet UL and CE standards.

Mar 10, 2017

Multi-Timers and Time Switches are used in control operations. Multi-timers are offered in universal digital and analog and programmable panel mount digital models. AMT8 and AMT12 offer time range from 0.1 sec to 999 hours, AMT10 and AMTAS in 0.1 sec to 100 hours and AMT33 in 0.1 sec to 999 days. ATS digital time switches come in three chrono versions allowing daily or weekly switching time... Read More

Controls & Controllers, Mechanical Power Transmission, Transportation Industry Products

Oerlikon Drive Systems Delights Participants by Showing a Wide Range of Innovative Solutions at ConExpo 2017

Mar 10, 2017

Lafayette/Turin, 9th March 2017 – Oerlikon Drive Systems segment, with its two brands Oerlikon Fairfield and Oerlikon Graziano, will display its latest high-tech solutions for all types of construction and mobile machinery applications at the ConExpo-Con/Agg exhibition at the Las Vegas Convention Center from March 7-11, in South Hall 3 Space # S81015. Oerlikon Drive Systems, located in the... Read More

Controls & Controllers, Mechanical Power Transmission, Transportation Industry Products

Oerlikon’s Drive Systems Segment to Showcase Technological Innovation at ConExpo-Con/Agg with a Wide Range of Off-highway Drive Solutions

Mar 08, 2017

Lafayette/Turin, 6th March 2017 – Oerlikon Drive Systems segment, with its two brands Oerlikon Fairfield and Oerlikon Graziano, will display its latest high-tech solutions for all types of construction and mobile machinery applications at the ConExpo-Con/Agg exhibition at the Las Vegas Convention Center from March 7-11, in South Hall 3 Space # S81015. Oerlikon Drive Systems, located in the... Read More

Controls & Controllers

Sinamics V20 Web Server Module is embedded with graphical user interface.

Mar 06, 2017

Featuring built-in multi-color LED, Sinamics V20 Web Server Module can be accessed through mobile device or laptop. Offering secure operator access and control functionality, unit’s smart access allows monitoring speed, current, voltage, temperature and power of drive up to 100 meters away. Using wi-fi hot spot, device helps in programming, commissioning, production monitoring and... Read More

Controls & Controllers, Safety & Security Equipment

iSTAR Ultra Video features AES 256-bit FIPS 140-2 network encryption.

Mar 06, 2017

Combined with access control and video surveillance functionality, iSTAR Ultra Video features 1 TB on-device storage drive for video surveillance and solid state drive for local database. Embedded with VideoEdge Network Video Recorder firmware, product’s storage can be extended up to 6 TB. Suitable for use in power sub stations, data centers and fiber hut environments, unit enables user to... Read More

Controls & Controllers

EtherNet/IP™ Now Available for Montalvo Z4 Tension Controllers

Mar 04, 2017

March 2, 2017, Gorham, ME, USA – Montalvo, international specialists in web tension control, is announcing ODVA EtherNet/IP™ Communication for its series of Z4 Tension Controllers. Available as a communication option for new Z4 Tension Controllers, or as an upgrade for existing Z4’s in the field, EtherNet/IP™ allows customers to easily interface with an existing HMI on the operator... Read More

Controls & Controllers

BRX Programmable Logic Controllers come with Do-more Designer software.

Mar 03, 2017

Available in M series (no onboard I/O), 10-point series, 18-point series and 36-point series form factors, BRX Programmable Logic Controllers feature stackable design. Designed with built-in data logging, motion control, serial and Ethernet communication, controllers come with hot-swappable POM. M-series controllers can be expanded with I/O module option and BRX 10-point, 18-point and... Read More

Controls & Controllers

4100-OTM Continuous Interface Monitoring of Vapour, Oil and Water Phases In Transfer Pipes

Mar 01, 2017

The ARJAY 4100-OTM sensing probe monitors the capacitance field between the probe and the concentric shield. The probe capacitance changes as the different dielectric phases of vapour, oil and water surround the probe. This interface signal is used to provide outputs, displays and relay control. All calibration, control interface and power wiring is done at the main control unit. The touch... Read More

Controls & Controllers, Mechanical Power Transmission

STAC6-Q-H Step Motor Drive works on anti-resonance algorithm.

Feb 27, 2017

Operating in -40 to +55 °C temperature range with 94-135 VAC, 50/60 Hz, single-phase supply voltage, STAC6-Q-H Step Motor Drive is designed with 7 digital inputs, 3 digital outputs and ±10 volt range 2 analog inputs. Delivering 120 Vdc, 1 phase, 4.24 A (rms) output power, unit is controlled with streaming commands, analog positioning, encoder following and Q programming. Featuring encoder... Read More

Controls & Controllers, Mounting & Attaching Products, Optics & Photonics

E-754 Nano Positioning Controller features 20-bit analog command interface.

Feb 27, 2017

Used in nanopositioning, nano-automation, photonics, bio-nano-technology, microscopy and micro-manipulation applications, E-754 Nano Positioning Controller features USB, Ethernet, SPI and RS-232 interfaces. Unit provides ultra-fast servo with 50 kHz update rate and 22-bit resolution. Embedded with auto-calibration chip for quick start-up and interchangeability, controller comes with software... Read More

Architectural and Civil Engineering Products, Controls & Controllers

U.S. Electric Power Companies' to Save Millions of Dollars with in-Place Substation Capacity Increases

Feb 25, 2017

Advanced motor controller technologies have demonstrated capabilities decrease alternating current motor start-up spike increment needs and to provide in-place additional capacities for growing customer KW and KWh usage..

Energy optimizing capabilities providing decreased customer electricity needs mean additional capacity and savings from existing substations with no on-site capital... Read More

Controls & Controllers

Alicat BASIS Mass Flow Controllers Chosen by VICI for Air Pollution Analyzer Calibrators

Feb 24, 2017

Accuracy, speed, size essential to operation of permeation devices

Tucson, Arizona (February 22, 2017) – Alicat Scientific’s BASIS mass flow controllers (MFCs) have been selected by Valco Instruments Co. Inc. (VICI) to precisely control gas flow rates in its Dynacal permeation devices. Alicat BASIS OEM instruments provide the control required by VICI to create gas mixes down to... Read More

Controls & Controllers, Sensors Monitors & Transducers

DG Series Thermistors feature 32 AWG dumet wire leads.

Feb 18, 2017

Available in 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ resistance values, DG Series Thermistors feature 3.0 mW/°C dissipation constant and 6 s thermal time constant. Operating in -55 °C to +200 °C temperature range, units provide TCR of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C and beta values of 3500 °K, 3950 °K, and 4200 °K. Designed in 1.5 mm diameter, thermistors allow for encapsulation of... Read More

Controls & Controllers

55S Series Point-of-Use Panels feature metal-to-metal seal packless diaphragm.

Feb 15, 2017

Eliminating leak paths, 55S Series Point-of-Use Panels are configured for accommodating up to four individual streams of gas. Featuring optional pipe away relief valve, panels eliminate damage to equipment in case of panel failure. Units are available up to 100 PSIG outlet ranges with front and rear inlet options. Capable of handling inlet pressure up to 2400 PSIG from gas source, unit... Read More

Controls & Controllers

750-8208 PFC200 Series Controller features PROFIBUS DP Master interface.

Feb 13, 2017

Featuring compact size, large memory, firewall and secure VPN, 750-8208 PFC200 Series Controller is equipped with two Ethernet ports, CAN and serial interfaces. Unit acts as gateway between multiple fieldbuses.

Read More

Controls & Controllers

CANect® M2M and IoT Modules come with 4GB of eMMC Flash Memory.

Feb 13, 2017

Available in CL-T05 (Wi-Fi), CL-T06 (GSM) and CL-T07 (Wi-Fi & GSM), CANect® M2M and IoT Modules are designed with i.MX 6UltraLite Cortex®-A7 Core (696MHz) Microprocessor. Featuring 128 MB DDR3 RAM and USB 2.0, units are used to collect and transmit vehicle data through CANect View®, Reflector®, Portal® and Composer® applications.

Read More

Controls & Controllers

PAX®2C PID Controllers feature large LCD display.

Feb 13, 2017

Operated with DC current, DC voltage, process signals thermocouples and RTD inputs, PAX®2C PID Controllers are enabled with Ramp Soak functionality and FlexCard™ plug-in options such as heater current monitor and second process input card. Enabling 20 step changes for adjusting temperature, controllers come with 16 alarms and built-in USB programming port. PAX2Cs are suitable for automation... Read More

Controls & Controllers

Watlow Receives UL® Certifications for Hazardous and Non-Hazardous Locations on Select WATCONNECT® Control Panels

Feb 10, 2017

St. Louis, MO – Watlow®, an industry leader in the design and manufacture of complete thermal systems, recently announced that it received UL® approval on four models from the new WATCONNECT® line of control panels. The C2, C3, C4 and C5 panels are now certified for hazardous and non-hazardous locations, and they are available for immediate order and shipment. The C2 is the small... Read More

Controls & Controllers

HEC-P6000 Controllers feature user configurable analog inputs.

Feb 09, 2017

Programmed using Ladder Diagram, Function Block, and Structured Text, HEC-P6000 Controllers come with high I/O count with 14 digital inputs, 3 high speed counter inputs, quadrature encoder interface and 14 digital outputs rated for 2A each. Supporting MODBUS RTU/ASCII protocols, controllers are operated with 8-32 VDC supply voltage in -40°C to +80°C temperature range. HEC-P6000s are designed... Read More

Controls & Controllers

828D CNC Controllers are equipped with software version 4.7.

Feb 04, 2017

Capable of controlling milling machines with up to eight interpolating axes or spindles, 828D CNC Controllers support machine tool builders in designing compact grinding machines with up to ten axes and two machining channels. Used for milling, turning and grinding machine applications, controller can transfer contour elements directly from DXF file via contour detection into programming of... Read More