New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Process Controller suits seam welding of thin gauge metals.

Process Controller suits seam welding of thin gauge metals.

CSC MIG welding controller utilizes controlled short circuit gas metal arc welding process to clear short circuits by retracting wire from short. Controller syncronizes wire feeder actions with power supply current to continuously feed wire alternatly between forward and reverse directions. Process helps to increase travel speed and eliminate spatter on wide range of materials including steel,...

Read More »
Ethernet Controller is supplied in 28-pin package.

Ethernet Controller is supplied in 28-pin package.

Designed for remote communication with embedded applications, stand-alone ENC28J60 is IEEE 802.3-compliant and employs 10 Mbps SPI(TM) serial interface. Product integrates TCP/IP software stack for host PIC-® microcontrollers, on-chip 10 Mbps Ethernet physical layer device, and medium access controller. Offered in 28-pin SPDIP, SOIC, SSOP and QFN packages, unit also features programmable...

Read More »
Flash Microcontrollers suit low-voltage applications.

Flash Microcontrollers suit low-voltage applications.

Able to deliver up to 10 MIPS at 3 V, 8-bit PIC18F87J10 series is comprised of 10 models that utilize nanoWatt technology for power management while providing linear access to 32-128 Kbytes of onboard Flash memory. Series employs 2 synchronous serial ports, capable of SPI(TM) or I2C(TM), as well as 2 asynchronous serial ports, LIN-capable USARTs. Products are offered with up to 4 Kbytes of data...

Read More »
Electric Actuator modulates loads up to 8,000 lb-ft.

Electric Actuator modulates loads up to 8,000 lb-ft.

Suited for large fan dampers typical of utility FD and ID applications, Group 22 Control Drive provides positioning of final control elements with resolution down to 0.1% of span. It is fully enclosed in weatherproof housing rated for service environments from -40 to +185-

Read More »
DC-DC Controller is rated for operation from -40 to 125

DC-DC Controller is rated for operation from -40 to 125

Model LT3724 is suited for use in step-down, step-up, inverting, or SEPIC circuits with up to 100 W of output power. Power supply incorporating controller can convert 4-60 V input supplies to regulated output from 1.23-36 V. Operating at constant switching frequency of 200 kHz, single-chip unit includes Burst Mode-® operation, which minimizes quiescent current below 100 -µA. Operating...

Read More »

VAV Controller helps maintain tight flow accuracies.

TALON Predator Single Duct/Dual Duct Low Flow Controller is suited for flow ranges between 150-1,200 fpm, with tightest accuracy below 400 fpm. It provides quiet operation to eliminate occupant white noise. Variable air volume controller is suited for critical environments in hospitals, laboratories, industrial buildings, and medical offices where highly accurate building control is required.

Read More »

Microcontrollers offer portable sensing and measurement.

Signal-Chain-on-a-Chip Series MSP430F42x0 features integrated 16-bit ADC with 5 differential input channels, up to 8,000 samples/sec, and signal to noise and distortion ratio of 84 dB. Converter has programmable gain amplifier, 1.2 voltage reference, and input buffer to eliminate need for external signal conditioning. Microcontrollers include 32 Kb of flash memory and LCD driver with internal...

Read More »
Vapor Retarder changes according to ambient humidity.

Vapor Retarder changes according to ambient humidity.

Suited for areas with seasonal changes in temperature and humidity, MemBrain(TM) smart vapor retarder changes permeability from less than 1 perm in low-humidity conditions to greater than 20 perm in high-humidity conditions. Polyamide film breathes to allow excess moisture to escape from wall cavities. This helps reduce risk and liability of concerns such as mold growth and rot due to excess...

Read More »
Process Controllers offer 0.1% accuracy.

Process Controllers offer 0.1% accuracy.

Series FB enables operator to select from autotuning, advanced autotuning, or Brilliant IT autotuning feature, which allows selectable PID control. Sampling times include 50, 100, or 250 ms. Featuring universal input, Series FB offers up to 7 digital inputs, 4 digital outputs, and 2 communications ports. Remote setpoint input and multi-memory area are standard. Units come in -¼ DIN or 1/8 DIN x...

Read More »
Smart Power Modules target consumer appliances.

Smart Power Modules target consumer appliances.

Mini-SPMs provide motor control for energy-restricted white goods such as washing machines and air conditioners. Offering thermal resistance, 7 modules each integrate 3 high-voltage ICs, 1 low-voltage IC, 6 IGBTs, and 6 fast recovery diodes. Combining analog and discrete technologies in one package, devices are housed in 44 x 26.8 mm Mini-DIP package, range from 3-30 A, and include under-voltage...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics