New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Hardware/Software provides platform for machine control.

Ethernet Powerlink-compatible system includes servo motor drives, machine controller, and license-free software. Mint(TM) software provides programming environment that exploits Ethernet-compatible machine control hardware, while NextMove e100 control platform offers real-time core that can control over 200 Ethernet Powerlink devices. MicroFlex e100 drives provide dual-port Ethernet hub interface...

Read More »
Digital Signal Controllers suit appliance motor controls.

Digital Signal Controllers suit appliance motor controls.

Series 56F8000 is based on 56800/E core with 32 MIPS and single-cycle multiply accumulate execution. Units feature 96 MHz pulse width modulation with programmable fault capability, 12-bit ADC with 1.125 -µsec conversion rate, 16 KB program flash memory, 4 KB program/data RAM, and up to 26 GPIO. In addition to motor controls, 16-bit DSCs are suited for digital power conversion applications...

Read More »

Servo Control comes in 80 x 50 x 17 mm package.

Based on MotionChip(TM) DSP Control Technology, ISCM4805 Intelligent Servo Control Module is designed to embed motion control, drive, and PLC functionalities in one open frame unit. Software-configurable product, offered in stand alone or multi-axis configurations, drives brushless, DC brush, or step motors up to 200 W. Torque, speed, position, contouring, profiling, e-cams, and step motor...

Read More »
ESD Protection Devices provide capacitance of 0.25 pF.

ESD Protection Devices provide capacitance of 0.25 pF.

Utilizing thick film technology, Models PESD0402 and 0603 provide I/O port protection on USB 2.0, IEEE 1394, digital visual interface, and antenna switches. RoHS-compliant devices shunt ESD away from sensitive circuitry in HDTV equipment, printers, laptops, cellular phones, and other portable devices. They are compatible with standard surface-mount and reflow installation procedures and are...

Read More »
Microcontrollers are based on ARM7TDMI 32-bit RISC CPU.

Microcontrollers are based on ARM7TDMI 32-bit RISC CPU.

Models STR711 and STR712 are USB and CAN interface devices, respectively, with 64 kbyte Flash and 16 kbyte of RAM. Supplied without USB or CAN module, STR715 naked 32-bit MCU offers 64 kbyte code Flash memory, 16 kbyte data Flash, and 16 kbyte RAM. On-chip RAM for 128 kbyte Flash versions in STR710F family range from 16-32 kbyte. Memory choices include 256 kbytes code Flash with 64 kbyte RAM, 128...

Read More »
Logic Controller includes software for cam/profile design.

Logic Controller includes software for cam/profile design.

ServoWire Motion and Logic Controller features software for creating electronic cams and profiles. Cam/Profile Designer tool aids in creation of Cam (master vs. follower position) and Profile (axis position vs. time) data. Cam motions are based on data table that describes motion of slave axis relative to motion of master axis. Cams and profiles can be up to 1,024 points in length, and...

Read More »
Microcontrollers suit automotive cockpit applications.

Microcontrollers suit automotive cockpit applications.

Manufactured in PQFP128 package, CDC 3207G, 3231G, 3272G, and 3297G are ARM7TDMI-®-based integrated 32-bit dashboard controllers with scalable architecture and EMI reduction module. Low emission automotive processors allow users to directly drive up to 7 stepper motors for analog instruments as well as 192 segment LCD. Up to 4 CAN interface blocks, which support up to 32 message objects, enable...

Read More »
Dual-Stage System produces reusable water from wastewater.

Dual-Stage System produces reusable water from wastewater.

Membrane Bio Reactor combines diffused aeration and biological treatment with membrane filtration to produce reusable water in 8 hr. After air is added to incoming effluent, bacteria reduce organic content. Stage 2 filters water through membranes resembling rows of straws with microscopic pores that draw clear liquid into them while keeping solids out. System can be operated automatically from...

Read More »
Motion Controller links up to 16 servo amplifiers.

Motion Controller links up to 16 servo amplifiers.

Offered in 1-, 2-, 4-, and 16-axis versions, Digital MMC mounts directly in one 230 or 460 V MMC Smart Drive servo amplifier and controls it and up to 15 additional units daisy-chained together via RJ-45 connection. Field-installable product includes 8 dc inputs and 8 dc outputs on-board; I/O on each drive is accessible to application program over digital network. Unit also provides an...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics