New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Safety Controllers feature Ethernet/IP interface.

Featuring built-in 4-port Ethernet switch for connecting I/O blocks, Allen-Bradley GuardPLC 1600 and 1800 safety controllers are offered with choice of 4 distributed I/O modules. Digital modules include 8 input/8 output and 16 input/8 output versions with bipolar outputs for use with robot controllers. Analog module has 8 safety-rated inputs and 4 standard analog outputs, and relay module has 8...

Read More »

Temperature Modules control probes and heaters.

Microprocessor-based, closed-loop 15 A Models UATC-20 and S20-D3C are designed for Type J or K thermocouples and operate in automatic or manual mode. Model S20-D3C has mechanical setpoint control, while Model UATC-20 includes ground fault indicator, output power percentage on LED display, and electronic setpoint control. Both feature anti-arcing circuitry to help prevent accidental damage, open...

Read More »

Bit Holders provide torque control on hard joints.

When used with current-control driver, Compliant Drive(TM) Bit Holders permit driver to complete joint even if running at full speed. Units work with Smart Torq(TM) II Controller, which provides error-proof fastener assembly by controlling and monitoring dc brushless electric screwdrivers. With 8 programmable torque settings, controller offers adjustable go-no-go limits for cycle time, joint...

Read More »

Static Grounding Clamp visually indicates safe conditions.

With flashing green LED, intrinsically safe Bond-Rite Remote wall-mounted monitoring module and grounding clamp system continually verifies low-resistance connection to ground is maintained in areas where potentially flammable materials exist. Models may be battery powered or line powered through power supply unit mounted in safe area up to 350 ft away. Approved for use in hazardous locations,...

Read More »

Distributed Control System delivers PLC architecture.

Foxboro A2 T2550 combines control and I/O technology into expandable baseplate or chassis that can be deployed independently or as part of centrally controlled network. Each unit can have up to 32 process controllers that operate in simplex mode or in optional redundant mode. Standard T2550 control and I/O baseplate houses up to 16 I/O cards, which can be replaced live, under power, without...

Read More »
I/O System facilitates small machine control.

I/O System facilitates small machine control.

With modular Advantys(TM) OTB Distributed I/O System, users can create I/O islands managed by master controller, via fieldbus or communication network. System includes 3 communication bases for various types of fieldbus, CANopen, Ethernet TCP/IP, or Modbus-® RS485 serial line. At width of 55 mm, each communication base includes 20 I/O, totaling 12-24 Vdc inputs, 6 relay outputs, and 2-24 Vdc...

Read More »

Stepper Module is compatible with distributed I/O network.

Designed for Allen-Bradley's Point I/O, stepper motor control module, Model 3401, has 2 sinking inputs, which can be used for homing and limit switch operations. Design allows I/O to be distributed throughout machine instead of being located in one central panel. Step and direction output signals interface to any of AMCI's SD stepper drives or SMD family of integrated stepper drive/motor packages.

Read More »

Motion Controller provides plug-and-play operation.

Single-axis stepper motor controller, CMS-100 CosmoNet, programs and employs local network connectivity between PC and motor-control system. Providing micro-processing capability from fully integrated USB 2.0 logic controller, standalone unit features EEP-ROM chip, transmittal program memories, 12 inputs, and 2 outputs. Modular architecture is designed for external device linking and can execute...

Read More »

Motion Controller Module acts as interface to PCI-bus.

Suited for stepper and servo motors, MCI-0410 positioning system links and enables motor/driver connectivity to controller. Programmable 4-axis PCI-bus controller module is controlled by MPG2031 pulse generator chip, which carries out PCI-bus operation and oversees all programmed commands. Features include Z-phase counting and various signal and encoder/sensor input keys, standard clock of 3.2768...

Read More »

Flash Microcontroller supports USB 2.0 low-speed protocol.

Featuring up to 32-kbytes Flash memory, Series ST7263B supports DFU specifications, enabling direct downloads from host to USB product. HID 1.0 compliant USB interface has embedded transceiver and internal 3.3 V voltage regulator. Three endpoints with In/Out configuration to manage data exchange, SCI Interface, as well as Low Voltage Detector and 8-bit A-to-D converter allow compatibility with...

Read More »

All Topics