NAND Controller supports multi-level cell Flash market.

Suited for use in space-constrained consumer applications, Model SST55LD019M flash-based NAND Controller is offered in 14 x 14 mm 100-pin TQFP, 9 x 9 mm 84-ball TFBGA, and 6 x 6 x 0.85 mm VFBGA packages. It includes programmable multi-tasking NAND interface and delivers up to 10 MB/sec sustained read and write performance. Controller features dynamic wear leveling, Error Correction (ECC) engine,...

Read More »

Position Controller offers fully programmable operation.

Capable of position, velocity, and current mode operation, EPOS P 24/5 can be used as stand-alone controller or to control other non-programmable EPOS units. Programmable digital motion controller measures 4.2 x 3.3 x .9 in. and communicates via RS-232 or CANopen. Capable of 5 A max continuous current (10 A peak), unit offers efficiency to 90% and features 50 kHz switching frequency. For...

Read More »
Power Controllers are available in 15 A or 25 A versions.

Power Controllers are available in 15 A or 25 A versions.

SSNP single-phase control type and SSNZ series for zero-cross control are narrow 21.5 mm to allow for close DIN rail or screw mounting, either vertically or horizontally. Response to changing input setting is one cycle or less. Functions include ramp-up/ramp-down (soft start), auto-detecting power frequency that selects power supply of 50Hz or 60Hz, and manual control.

Read More »

Microcontrollers feature up to 1 MB embedded flash memory.

Based on 0.15-micron process technology, 8-bit Fx2 series and 32-bit Fx3 series microcontrollers (MCUs) are optimized for automotive body and safety control applications. Pin counts range from 44-176, and flash memory configurations range from 32 KB to 1 MB. Line is composed of 29 MCUs: 13 based on 8-bit 78K0 CPU core and 16 based on the 32-bit V850ES(TM) CPU core. All devices support controller...

Read More »

FPGA Programming Tool has 64 MB of internal memory.

Silicon Sculptor 3 field-programmable gate array (FPGA) programming tool features high-speed USB 2.0 interface allowing connection of up to 12 programmers to single PC. Leveraging antifuse-based Axcelerator FPGA device, unit offers concurrent programming of highly dense parts. Device supports standard and ARM-enabled versions of ProASIC3 family and Actel Fusion Programmable System Chips.

Read More »
PWM Controller enables power supplies up to 320 A.

PWM Controller enables power supplies up to 320 A.

Operating as stand-alone device that generates 2 outputs or as 2-channel, multi-phase controller, Model TPS40140 synchronous, pulse-width modulation (PWM) controller turns power supplies into scalable, stackable power systems that can support up to 16 phases. Current-mode controller supports 2-40 V input voltage conversion range, enabling operation from 4.5-15 V power source. Line and load...

Read More »
Control Modules suit industrial automation applications.

Control Modules suit industrial automation applications.

With built-in web browser diagnostics for deployment and support, CONTROLweb(TM) Open Control Platform Modules includes RMU Linux Logic Controller with built-in I/O and peripherals and features 32-bit PowerPC(TM) technology, Linux OS, and dual Ethernet ports. Using TCP/IP protocols to provide remote I/O with response times down to 2 msec, MicroNode and MacroNode modules enables logic flexibility...

Read More »
Microcontrollers are optimized for embedded applications.

Microcontrollers are optimized for embedded applications.

Comprised of 9 models, 8-bit PIC18F97J60 series has on-chip Medium Access Controller (MAC) and Physical Layer Device (PHY). Integration of 10BASE-T Ethernet controller onto 10 MIPS PIC18 microcontroller with up to 128 KB Flash program memory provides single-chip remote-communication solution for various applications. Along with dedicated 8 KB Ethernet buffer, series comes with integrated IEEE...

Read More »

Inkjet Controller features expandable design.

Used with Drop-on-Demand(TM) printheads, I-Mark SX32 can produce graphics, logos, and datecodes from 0.09-5 in. high on porous and non-porous substrates. Icon-based user interface has password-protected user levels, graphics, date and time functions, counters, and integrated keyboard with hot keys for frequently used functions. Capable of controlling up to 4 printheads, SX32 is expandable and...

Read More »
Servo Controller System suits automation applications.

Servo Controller System suits automation applications.

Featuring NEMA 1 rated enclosure, LP Series control package includes PCI motion controller card, power amplifiers, and power supply. Smooth, continuous, 2D or 3D motion eliminates puddling when dispensing fluids or working with solder. Also included, SAC Motion Control software enables basic motion function programming. Additional features include 16 digital inputs and 8 digital outputs, 2 dc...

Read More »

All Topics