USB DNC Unit features hard-wired design.
Miscellaneous Controls

USB DNC Unit features hard-wired design.

Via Ethernet network, Wired USB DNC Unit communicates directly to USB communication port on machine tool. DNC technology gives customers that use PC-based controls ability to use tools such as file rev. control and 20,000 V of surge protection while still being able to control DNC from office. Operators will also be able to view directory listing at CNC control, and transfer files with...

Read More »
ULP ARM Cortex M4 MCUs target wearables, sensor hub management.
Miscellaneous Controllers

ULP ARM Cortex M4 MCUs target wearables, sensor hub management.

Targeting IoT market for battery-operated devices, including SoC solutions for wearables, SAM G54 and SAM G55 series of ARMÂ-® Cortex®-M4-based MCUs include Atmel SMART ARM Cortex-M4 MCU + FPU (floating point unit), integrated sensor fusion algorithms, packages down to 2.84 x 2.84 mm, frequency up to 120 MHz, as well as ULP ratings down to 102 µA/MHz in active mode, and 5...

Read More »
Wire Cloth and Mesh

Dust and Fine Removal System optimizes molding process.

Using- patented, rotating tumbling process, sometimes with vacuum assist, Model 0308 DFS System removes dust, powders, and fines from regrind or virgin material at approximately 25 lb/hr. System was created for limited space environments and can be mounted press-side to current granulator system. Full accessibility with tilt-back cover facilitates servicing and cleaning.

Read More »
Programmable Embedded Controller targets oil and gas industry.
Miscellaneous Controllers

Programmable Embedded Controller targets oil and gas industry.

Small Form-Factor, DIN Rail-Mountable ARES-5300 Is Ideally Suited for Rugged Oil and Gas Applications SAN JOSE, Calif.,- – Arbor Solution announces the introduction of the latest addition to its ARES series of extended-temperature box PCs, the ARES-5300 Programmable Embedded Controller. The fanless, cableless, modularized-designed unit features a power-efficient Intel® Celeron® J1900...

Read More »
Wire Cloth and Mesh

Dust and Fine Removal System optimizes molding process.

UsingÂ- patented, rotating tumbling process, sometimes with vacuum assist, Model 0308 DFS System removes dust, powders, and fines from regrind or virgin material at approximately 25 lb/hr. System was created for limited space environments and can be mounted press-side to current granulator system. Full accessibility with tilt-back cover facilitates servicing and cleaning.

Read More »
AC Motor Speed Control drives motors rated up to 1 hp.
Miscellaneous Controls

AC Motor Speed Control drives motors rated up to 1 hp.

Housed in NEMA-4X/IP65 aluminum die-cast enclosure, Model 2999 Pacesetter™ is suited for stand-alone AC gearmotor applications that require variable speed, controlled acceleration, and reversing. Unit drives 230 Vac, 50/60 Hz, inverter-duty 3-phase gearmotors and motors rated up to 1 hp/746 W. Allowing for up to 200% starting torque, control ensures startup of high frictional loads. Slip...

Read More »
AC Motor Speed Control drives motors rated up to 1 hp.
Miscellaneous Controls

AC Motor Speed Control drives motors rated up to 1 hp.

Housed in NEMA-4X/IP65 aluminum die-cast enclosure, Model 2999 Pacesetter™ is suited for stand-alone AC gearmotor applications that require variable speed, controlled acceleration, and reversing. Unit drives 230 Vac, 50/60 Hz, inverter-duty 3-phase gearmotors and motors rated up to 1 hp/746 W. Allowing for up to 200% starting torque, control ensures startup of high frictional loads. Slip...

Read More »
Environmental Controllers

Perma Pure Launches New Nafion Dryer for Aerosol Research and Measurement

MUMBAI – Perma Pure, the global leader in sample gas conditioning, has launched a new Nafion dryer in the Indian market. The MD-700 large diameter dryer was specifically developed for humidity control in particle measurement and aerosol analysis applications, but can be used in a wide range of drying or humidifying applications. In order to minimise particle losses, a laminar sample flow should...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics